Wireless Light Switch Kit 433MHz RF Remote Receiver 10A 1000W IP66 No Wiring
Seller Info
Overview
This Thinkbee wireless light switch kit lets you add or relocate a light switch without cutting walls or running new cable. The mini portable push-button switch communicates with the receiver by 433MHz RF, so you can mount it where it is convenient and control one light from that point. The switch is held in place with the supplied adhesive tape or screws, making it suited to renovations, staircases, bedrooms, garages and garden sheds.
The receiver works on AC 80-275V and switches loads up to 10A and 1000W, covering LED, incandescent, fluorescent and halogen lamps, ceiling fans and similar devices. Please check the rated load before connecting high-power appliances, and note the receiver requires a neutral wire. The switch carries an IP66 rating, and its push button is rated for 400,000 presses.
For multi-point control, up to eight wireless switches can be paired with one receiver, so the same light can be operated from several locations. The manufacturer states an indoor range of roughly 30-50m and an outdoor range of roughly 300-400m, depending on walls and surroundings; encrypted pairing helps prevent interference when several switches are used in one home.
Key Features
- No wiring, no wall cutting or electrician needed
- Single-gang wireless switch and receiver kit
- 433MHz RF signal passes through walls and floors
- IP66 switch and V0 flame-retardant PC material
- AC 80-275V, 10A, 1000W load
- Up to eight switches can pair with one receiver
- Replaceable CR2032 battery included
What's Included
- 1x RF Wireless Switch
- 1x Receiver
- 1x Manual
- 2x Self-locking terminals
- 2x Double-sided tapes
Specifications
- Brand
- Thinkbee
- Model
- Thinkbee Wireless Switch
- Colour
- White
- Material
- Fire-resistant plastic
- Operating Voltage
- AC 80-275V
- Current Rating
- 10A
- Maximum Load
- 1000W
- Connectivity
- 433MHz wireless RF
- Control Type
- Remote push button
- Protection Rating
- IP66
- Compatible Devices
- LED, incandescent, fluorescent, halogen lamps, ceiling fans and appliances up to 1000W
- Battery
- 1x CR2032 (included, replaceable)
- Switch Dimensions
- 7.5 x 4.8 x 1.5cm
- Item Weight
- 0.11kg
