Key description
-
Seal Kit
-
For DSBC/G-40 cylinders, NBR/FKM (Viton®) material, temp range: -20°C to +100°C (FKM up to +150°C).
-
Piston Seal
-
Single/double-acting, PU or NBR, rated for 10 bar pressure, fits 40mm bore.
-
Rod Seal (U-Cup)
-
NBR/PU, pressure-activated lips, leakage < 0.05 cm³/min at 10 bar, fits 40mm rod.
-
Wiper Seal (Scraper)
-
Polyurethane, dual-lip design, keeps out dirt, fits 40mm rod, temp: -30°C to +80°C.
-
Rod Bushing (Guide Bushing)
-
Bronze alloy, self-lubricating, inner diameter matches 40mm rod, reduces side load.
-
Vent Screw with Filter
-
M6/M8 thread, sintered bronze filter (5-10μm), IP54 rated, prevents moisture.
-
Mounting Screws
-
M8 x 25mm, grade 8.8 steel, torque: 15-18 Nm, corrosion-resistant finish.
-
Grease Nipple
-
M8 x 1 thread, straight/90° angle, 300 bar max pressure, fits standard grease guns.
-
O-Ring Set
-
NBR material, fits ports/covers, sizes: e.g., 12x2mm, 18x2.5mm.
-
Repair Manual
-
Illustrated guide, multilingual, includes torque specs and disassembly steps.
- For DSBC/G-40 cylinders, NBR/FKM (Viton®) material, temp range: -20°C to +100°C (FKM up to +150°C).
- Single/double-acting, PU or NBR, rated for 10 bar pressure, fits 40mm bore.
- NBR/PU, pressure-activated lips, leakage < 0.05 cm³/min at 10 bar, fits 40mm rod.
- Polyurethane, dual-lip design, keeps out dirt, fits 40mm rod, temp: -30°C to +80°C.
- Bronze alloy, self-lubricating, inner diameter matches 40mm rod, reduces side load.
- M6/M8 thread, sintered bronze filter (5-10μm), IP54 rated, prevents moisture.
- M8 x 25mm, grade 8.8 steel, torque: 15-18 Nm, corrosion-resistant finish.
- M8 x 1 thread, straight/90° angle, 300 bar max pressure, fits standard grease guns.
- NBR material, fits ports/covers, sizes: e.g., 12x2mm, 18x2.5mm.
- Illustrated guide, multilingual, includes torque specs and disassembly steps.
