| Specification | Details |
|---|---|
| Brand | DuraVent |
| MPN / Part Number | 58DVA-24 |
| Stock Number | 810001377 |
| Series | DirectVent Pro |
| Product Type | Fixed Straight Direct Vent Pipe |
| System Type | Coaxial / Concentric Direct Vent |
| Inner Diameter | 5 in. |
| Outer Diameter | 8 in. |
| Nominal Length | 24 in. |
| Installed Length | Approx. 22-1/2 in. |
| Construction | Double Wall / Unitized |
| Inner Wall | 0.020" Aluminum |
| Outer Wall | 0.018" Galvanized Steel |
| Finish | Galvanized |
| Connection | Twist-Lock |
| Fuel Compatibility | Natural Gas / Propane |
| Application | Direct-vent gas fireplaces, stoves and heaters |
| Quantity | 1 Each |
DuraVent's DirectVent Pro system is a unitized coaxial venting system designed for compatible direct-vent gas and propane appliances. The inner pipe carries exhaust gases outside while the outer pipe supplies combustion air to the appliance.
The exact 58DVA-24 is a 5" × 8" fixed pipe section with a nominal 24" length. After the 1-1/2" joint deduction, its installed length is approximately 22-1/2 inches.
DuraVent 58DVA-24 DirectVent Pro 5" x 8" x 24" Galvanized Straight Vent Pipe
The DuraVent 58DVA-24 is a professional 24-inch fixed straight pipe section for the 5" × 8" DirectVent Pro coaxial venting system.
Designed for compatible direct-vent natural gas and propane fireplaces, heaters and stoves, this double-wall pipe simultaneously handles exhaust and combustion-air intake. The 5-inch aluminum inner pipe exhausts combustion gases while the 8-inch galvanized-steel outer pipe supplies combustion air.
Construction consists of a 0.020-inch aluminum inner wall and 0.018-inch galvanized-steel outer wall. DuraVent's fully unitized Twist-Lock design provides secure connections without separate gaskets or sealants unless the appliance manufacturer specifically requires them.
The 58DVA-24 is designed for compatible direct-vent gas or propane fireplaces, stoves and heaters using the DuraVent 5" × 8" DirectVent Pro system.
It can be used as a straight section in vertical or horizontal vent configurations when allowed by the appliance manufacturer's installation instructions.
Compatibility note: This is DirectVent Pro, not generic stovepipe and not DirectVent GS. Always verify that the specific fireplace/heater manufacturer approves the 5" × 8" DirectVent Pro system. Required clearances are detened by the appliance manufacturer.