ThemeScene HD83 has best-in-class colour saturation, essential for faithful and accurate reproduction of films. Image depth and clarity have been achieved by combining high ANSI contrast levels and exceptional brightness to produce vivid images even on the largest of home cinema screens.

The HD83 incorporates the next generation of the Optoma frame-interpolation processing. PureMotion4 retains the smoothness of film whilst maximising the detail of every frame. PureMotion4 can be also be used in “3D mode” and can be adjusted to virtually eliminate motion blur normally visible in panning scenes.

 

Advanced lamp-pulsing technologies enable every frame to be analysed and fine-tuned directly from the lamp – this unprecedented control makes it possible to achieve vibrant, perfectly saturated colours across the light spectrum whilst simultaneously ensuring that only the minimum level of power is required.

 

For the installer or advanced end-user wanting to optimise their installation,  a full colour management system (CMS+), gives the flexibility to choose between 5 pre-set colour gamuts; HDTV (Rec 709), EBU, DLP Cinema, SMPTE-C & Native. Alternatively, fine-tune intensity and x/y co-ordinates of primary and secondary colours for ultimate calibration precision.

 

“The Optoma HD83 produces some of the highest quality 3D images available to projector enthusiasts today.  The inherent pixel switching speed of Optoma applied DLP technology allows us to switch each pixel on and off at least 10,000 times a second, enabling the full resolution and brightness of each 3D frame to be displayed virtually without ghosting”, commented Justin Halls, Head of Product Management at Optoma. “By contrast, some other 3D technologies with pixel switching speeds generally up to 20 times slower than DLP, need to halve the resolution of the 1080P image and then use old fashioned line doubling techniques to fill in the missing parts of the image. Treating the image this way can result in a 50% loss of vertical resolution, bad ghosting artifacts and a substantial loss of brightness.”

 

The HD83 can be easily placed in existing home cinemas with minimal revision to the set-up since it requires no special screen, making it ideal for retro-fit projects. The HD83 has been developed in parallel with the new Optoma 3D-RF (radio frequency) glasses which use Wi-Fi technology to eliminate emitter placement and interference issues experienced with infra-red glasses. The 3D-RF glasses give superior performance to other IR based solutions, providing a longer range, superior battery life and are fully rechargeable.

 

A full range of analogue and digital inputs are available, including 2 x HDMI inputs with v1.4a 3D support.

 

The HD83 includes two pairs of 3D-RF glasses, one of which includes the RF emitter and will be available from selected retailers, priced at £2399.99.

 

HD83 Key Features

• Impressive 1080p DLP^® picture quality
• Full 3D 1080p support – 3D Blu-ray, Games and TV
• Excellent placement flexibility – Lens shift and wide zoom range
• Full CMS+ for ultimate colour calibration precision
• 50,000:1 contrast ratio
• Superb motion performance using PureMotion4

 

HD83 Specifications

Native Resolution                            1080p (1920 x 1080)

Peak Contrast                                    50,000:1

Brightness                                           1600 ANSI Lumens

Noise Level                                         22dB (Eco Mode)

Weight                                                 8.4kg

Dimensions (L x W x H)                  490 x 372 x 194mm (180mm excl. feet)

Remote Control                                Backlit with direct source selection

 

INPUTS:                                               2 x HDMI (v1.4a 3D supported)

Component

S Video

Composite

 

OUTPUT:                                             2 x+12V OUT for Screen Triggering (1 programmable)

                                                                3D-Sync OUT (for 3D-RF System)

Brightness

1,600 Lumens (ANSI)¹

Resolution

1920x1080

Aspect Ratio

16:9 (HD)

Contrast

50,000:1 (full on/off)

Dynamic Iris

Yes

Display Type

2 cm DLP x 1

Color Processing

10-bit

Video Modes

720p, 1080i, 1080p/60, 576p, 480p, 480i

Data Modes

MAX 1920x1080

3D Modes

Full HD 3D

---

Light Source

280W P-VIP bulb

Light Source Life

3,000 hours  / 4,000 hours (Eco)

Lamp Model

BL-FP280F 

---

Included Lens

1.5x manual zoom , manual focus

Optional Lenses

No

Lens Shift

Horizontal +/-15% & Vertical +25%

Throw Distance

1.5 m - 9.8 m  

Image Size

78 cm - 746 cm

Throw Ratio

1.50:1 - 2.25:1 (D:W)

Projector Placement

For a

cm

diagonal screen, place the projector lens between 3.3 m and 5.0 m from the screen.

Digital Keystone

Vertical only

---

Projector Size

19 cm x 49 cm x 37 cm (HxWxD)

Weight

8.4 kg

Audible Noise

28 dB

Internal Speakers

No

Power

360 Watts 100V - 240V

Connection Panel

12-Volt Trigger x 2

Component

Composite: RCA

HDMI 1.4a x 2

RS232: DB-9pin

USB

VGA In: Dsub-15pin

---

Features

Anamorphic Ready

Full HD 3D

Additional Features

PureMotion4 processing ensures smooth and judder-free images for greater realism.