New Replacement Mirror Glass for 2007-2012 HYUNDAI SANTA FE Passenger Side View Right RH - Only fits mirrors without courtesy - turn signal light in housing.
Product Description
> Automotive Grade replacement mirror glass lens. Does not include plastic backing plate or electrical mirror heater attached or included.
> Important Note: This vehicle has TWO optional mirrors, check the dimension provided and compare to dimension of your mirror. This mirror glass DOES NOT fit vehicles that have Courtesy / Turn Signal light in mirror housing.
> Diagonal Measure (Longest): 8 7/16 inch = 21.4 cm . Longest diagonal dimension provided is the longest size of the glass in any direction, normally longest top to opposite bottom corners measurement.
> Includes double sided adhesive tape. This adhesive should only be used to stick the new glass lens on top of the cracked but firmly in place old glass that has a smooth and even surface.
> If the old glass is removed or fallen off from the plastic backing plate, or is missing pieces – the included adhesive should not be used as this backing plate in uneven and grooved and does not provide enough surface for double sided adhesive to bond. In this case it is recommended to use a form of permanent glue such as silicone to stick the glass on the grooved plastic backing plate.
> Glass is curved (convex) and engraved with insignia “Objects in mirror are closer than they appear” per highway safety acts in effect in the US and Canada.
> Special anti-rust paint layer on the engraving on back of the lens provides clear visibility and reading of the insignia on front and prevents from pre-mature rust of the glass coating on the back.
> Important Note: This vehicle has TWO optional mirrors, check the dimension provided and compare to dimension of your mirror. This mirror glass DOES NOT fit vehicles that have Courtesy / Turn Signal light in mirror housing.
> Diagonal Measure (Longest): 8 7/16 inch = 21.4 cm . Longest diagonal dimension provided is the longest size of the glass in any direction, normally longest top to opposite bottom corners measurement.
> Includes double sided adhesive tape. This adhesive should only be used to stick the new glass lens on top of the cracked but firmly in place old glass that has a smooth and even surface.
> If the old glass is removed or fallen off from the plastic backing plate, or is missing pieces – the included adhesive should not be used as this backing plate in uneven and grooved and does not provide enough surface for double sided adhesive to bond. In this case it is recommended to use a form of permanent glue such as silicone to stick the glass on the grooved plastic backing plate.
> Glass is curved (convex) and engraved with insignia “Objects in mirror are closer than they appear” per highway safety acts in effect in the US and Canada.
> Special anti-rust paint layer on the engraving on back of the lens provides clear visibility and reading of the insignia on front and prevents from pre-mature rust of the glass coating on the back.