Product overview

The Enet WiFi+Type C Adapter is a high-performance wireless communication adapter designed specifically for automotive diagnostics and programming. Featuring advanced WiFi technology with IEEE 802.11 b/g/n standard support, the device connects to vehicles via the OBD Il interface, providing technicians and engineers with a stable and convenient wireless diagnostic experience. Built on the proven MHD TUNING Flasher platform architecture, this product has undergone rigorous FCC Part 15.247 certification testing to ensure full compliance with Federal Communications Commission standards in the 2.4GHz frequency band. The addition of a Type C interface enhances expandability and compatibili- ty, enabling seamless connectivity with modern mobile devices and diagnostic tools. The product features built-in DolP (Diagnostics over Internet Protocol) support, meeting the diagnostic require- ments of premium vehicle brands such as for BMW.
Keypoints:

  • Full for BMW F/G/I Series Software Compatibility: This ENET WiFi adapter is rigorously tested to work seamlessly with BootMod3, BimmerCode, Bimmerlink, MHD, E-SYS, ISTA and other leading for BMW diagnostic and coding software, supporting everything from hidden feature activation to advanced module programming without compatibility errors.

  • Multi-Platform Wireless Connectivity: Designed to pair effortlessly with iOS, Android and Windows systems, it creates a stable, high-speed WiFi connection with no complicated driver installation required, allowing you to run professional-level vehicle operations directly from your phone, tablet or laptop.

  • 1.8-Meter Premium Shielded Cable: The extended 1.8-meter cable is constructed with thick, interference-resistant shielding and high-purity copper cores, which effectively blocks electromagnetic signal noise from the vehicle’s electronic systems to ensure uninterrupted data transmission even in busy workshop environments.

  • Intelligent Battery Protection System: Built with an advanced automatic sleep mode mechanism, the adapter will intelligently enter low-power consumption status once it detects that the vehicle engine is shut off, effectively reducing unnecessary power drain to safeguard your car battery from accidental over-discharge.

  • Plug-and-Play No Extra Setup: This all-in-one OBD2 to Type-C adapter requires no additional conversion connectors, external power supplies or tedious network configuration steps. Simply plug it into your for BMW’s diagnostic port, connect your device to its WiFi signal, and you are ready to start coding, scanning or tuning within seconds.

Specification:
  • Wireless Standard:IEEE 802.11 b/g/n
  • Frequency Band:2.4GHz(2412~2462 MHz)
  • Number of Channels:11 Channels (CH 1-11)
  • Modulation:CCK,OFDM,DBPSK,DAPSK
  • Max Data Rate:100 Mbps
  • Antenna Type:Internal Antenna
  • Antenna Gain:1dBi
  • Operating:Mode WiFi AP Hotspot Mode
  • RF Certification: FCC Part 15.247 Compliant
  • Vehicle Interface:OBD I1 16-Pin Standard Connector
  • Expansion Interface:USB Type C
  • Supported Protocol:DolDiagnosticover
  • Vehicle Power:OBD II Port (DC 12V)
  • Input Voltage:DC 12V (via OBD II port)
  • Operating Current:≤500mA (typical)
  • Power Consumption:≤6W
  • Overvoltage Protection:Supported
  • Reverse Polarity:Protection
  • Supported:ESD 
  • Protection:Automotive electronics standard
Function:
  • Automotive Diagnostics & Troubleshooting Through WiFi wireless connectivity, technicians can use laptops, tablets, or smartphones to perform real-time vehicle diagnostics. Free from the con- straints of traditional wired connections, technicians can move freely within the workshop, significantly improving work efficiency. Supports reading and clearing,fault codes, viewing live data streams,and other basic diagnostic functions.
  • ECU Programming & Flashing The productsupports the DolP protocol, meeting the advanced require- ments of modern premium vehicles for ECU programming,software flashing, and parameter configuration. The stable WiFi connection ensures reliable transmission of large data volumes, reducing the risk of interruption during flashing operations.
  • Vehicle Tuning & Performance Modification Based on the MHD TUNING technol- ogy_platform, the product provides modification technicians with a stable communication link, supporting ECU tuning and optimization for performance upgrades.
  • Mobile Diagnostic Workstation The Type C interface supports connection to external expansion devices, enabling the construction of a flexible mobile diagnostic workstation. Combined with the powerful processing capabilities of modern mobile devices, efficient diagnostics can be performed anytime, anywhere.
Compatibility:
  • This product fully supports wireless diagnostics and programming for BMW F-series,G-series, and I-series vehicles, (Note:Not compatible with the old E-series)compatible with the following popular mobile apps and PC software:compatible with vehicle series: Full F-series (F20/F30/F10/F15, etc.), G-series (G20/G30/G05/G06, etc.), and I-series (i3/i4/iX, etc.).
  • Work with Software:MHD BimmerCode BMW BM3 (Bootmod3) MG Flasher Bimmer Utility Bimmer Geeks
What is included:
  • 1*Enet Wifi+Type C Adapter Main Unit
  • 1*USB Type C Data Cable
  • 1*Quick Start Guide