- CX-70 25-Now
- CX-90 24-Now
- CX-50 23-Now
- CX-30 20-Now
- CX-3 16-Now
- CX-5 13-Now
- 3 Sport 09-Now
- 3 04-Now
- MX-30 EV 22-24
- CX-9 07-23
- 6 03-21
- 5 06-15
- MX-5 06-15
- MX-5 Miata 06-15
- CX-7 07-12
- RX-8 04-11
- Tribute 01-11
- B2300 94-10
- B4000 94-10
6 Spline Tuner Lug Nuts
[20] Black M12x1.5 Acorn Lug Nuts 35mm Tall for 03-27 Mazda CX-5 CX-50 3 CX-90
![[20] Black M12x1.5 Acorn Lug Nuts 35mm Tall for 03-27 Mazda CX-5 CX-50 3 CX-90](https://img.topmorrowusa.com/products/20x-black-cone-seat-closed-end-6-spline-drive-lug-nuts-m12x1-5-35mm-tall/20x-black-cone-seat-closed-end-6-spline-drive-lug-nuts-m12x1-5-35mm-tall-main.jpg?v=26082100&t=wbfvVlLmx2Ox95mj5LMj3Q)
Numbers, not adjectives.
Every dimension your wheel cares about ? measured, verified, documented.
M12x1.5 Acorn 6 Spline Lug Nut
Fits your car.
Verified, not guessed.
6-spline tuner lug nuts with a 60 degree cone (tapered) seat for aftermarket and steel wheels; the slim 21 mm flange suits tight tuner lug wells - match the cone seat of your original nuts.
Japan
1 FeaturedMazda
Not sure? Message us ? we verify your exact year & model before you buy.
A closer look at the product.
Finish, geometry, and packaging — from every angle. Tap a thumbnail to view.
Some fitment details only your vehicle can tell you.
The vehicle list above confirms your year, make and model. The points below are not part of that list — they depend on the wheels and hardware currently on your vehicle. Please verify them before ordering.
Performance you can torque down.
6-Spline Drive Doubles As A Deterrent
An ordinary hex socket cannot grip the fine, closely-spaced splines - the nuts turn only with the included spline socket. A theft deterrent, not a guarantee against theft.
Slim 21 mm Flange For Tight Lug Wells
The 21 mm (0.8 in) flange body drops into narrow tuner-wheel lug wells where fatter nuts jam against the wheel.
One For The Garage, One For The Glove Box
One for the garage, one for the glove box - each drives with a common 3/4 in or 13/16 in hex socket and a torque wrench.
60 Degree Cone Seat Centers The Wheel
The tapered (cone) face self-centers each nut in the lug hole - the seat style most aftermarket and steel wheels take.
Closed End, 35 mm Low Profile
35 mm overall height with a 33 mm thread depth caps the stud tip while sitting low against the wheel face.
SCM Carbon Steel Body
Solid SCM Carbon Steel holds wheel torque through seasonal swaps without rounding at the seat or the splines.
3 steps to torque.
Follow the sequence below ? fitment is everything, so read Step 1 carefully.
Fit The Spline Socket
Seat a spline socket fully over the nut's splines, then hand-start each nut on a clean stud several turns before any tool touches it.
Snug In A Star Pattern
With the wheel hanging level, snug all fasteners in a star (crisscross) pattern so the cone seats center the wheel evenly on the studs.
Torque To Vehicle Spec
Torque each nut to your vehicle's wheel fastener spec with the spline socket on a torque wrench, then recheck after the first drive. Stow one socket in the glove box.
Important Fitment Notice
- seat: wheel needs a 60 degree cone face
- nut waist must clear the lug hole
- stud must not exceed the 33 mm thread depth
- compare size with an original nut
- spline socket and torque wrench only - an impact gun rounds the drive; a rounded nut has to be drilled out of the wheel
- sockets cannot be replaced by code - keep one in the glove box; wheels do not come off without it
- lost both sockets = replace the set
eBay's compatibility list matches by vehicle only. The wheel-side facts above — seat geometry, hole clearance, installed depth and usable thread engagement — still need your own check. Message us through eBay before ordering if anything is unclear.
Clarity before checkout.
Wheel hardware is fit-critical. Our listing structure keeps the evidence a buyer needs in the order it should be checked.
Specification First
Thread, seat, dimensions, finish and quantity are organized for direct comparison.
Fitment in Two Layers
Vehicle compatibility and wheel-specific hardware checks are presented separately.
Component-Level Detail
Combination listings keep each component's quantity, gallery and technical data distinct.
Pre-Purchase Support
Message us through eBay with your year, model, wheel and current hardware details.
Check the details that decide fit.
Will this wheel hardware fit my exact vehicle?
How do I confirm thread pitch and seat type?
What should I verify on aftermarket wheels?
What torque specification should I use?
Where can I find current shipping and return terms?
Order terms, kept current.
The controls attached to this eBay listing are the source of truth for the transaction.
Shipping
Review the handling time, delivery estimate and available services shown on this listing. Tracking is provided through the eBay order when available.
Returns
The return window, eligibility and conditions shown in this listing govern the order. Start any return request from the eBay purchase record.
Fitment Responsibility
Confirm the listed thread, seat, dimensions, clearance and quantity before installation. When uncertain, message us through eBay before ordering.
Precision wheel hardware.
Clarity built into every listing.
ESPLUS focuses on wheel fastening hardware and fitment-critical accessories. We organize product specifications, vehicle application data, wheel-side checks and installation guidance so buyers can compare the right facts before ordering.
Visit Our eBay Store