💡 LedHERO 6 inch LED Round Slim Panel Light - 15W Dimmable (with Driver) 💡 4000K - 1200 Lumens

Recessed downlight, flat panel ceiling spot light, ultra slim LED spotlight

🔆 15W Panel 📏 Ultra Slim T<6.5mm 🎚️ Dimmable Driver Included 🔧 Full Fixing Kit 📦 Multi Unit Pack 🚚 In Stock Now

This is a LedHERO 6 inch LED round slim panel light, a recessed ceiling downlight designed to sit almost flush in a plasterboard or suspended ceiling. The box is printed "Ultra-slim T<6.5mm - 6 inch LED Round Slim Panel light - Dimmable - CE RoHS", and the seller's listing rates it at 15W. It comes with its own separate module labelled "Dimmable LED Driver" and a complete set of fixings, so it replaces bulky old halogen downlights and works as a flat panel spot light where there is very little ceiling void depth. Photographed unpacked so you can see every part; the light face is clean and the metal brackets show only light handling marks. 4000K - 1200 Lumens

📦 What You Get

✅ Choose Quantity of Lights Required - You Get from 1 to 48 Pack of lights - Light Size 6 inch Round LED Slim Panel Light with Fitted White Connector Lead and Driver- 4000K
✅ 1 x "Dimmable LED Driver" module with output connector lead and bare mains input tails
✅ 2 x metal mounting brackets
✅ 2 x sprung retaining clips with adhesive-backed strips
✅ 3 x large fixing screws and 3 x wall plugs
✅ Small mounting screws (as pictured)
✅ 1 x printed circular installation template / step diagram (steps 1-4 with direction arrows)
✅ Original LedHERO printed cardboard box, marked CE and RoHS

⭐ Why Choose This?

📏 Ultra slim body - the packaging states a thickness of under 8.5mm, so it suits shallow ceiling voids where a traditional downlight can will not fit
🎚️ Dimmable as supplied - the included driver is labelled "Dimmable LED Driver" by the manufacturer, so no separate module needs sourcing
🔆 15W 6 inch round panel - a wide, even lit face rather than a single hot spot, good for kitchens, hallways and living rooms
🔧 Everything to fit it in the box - brackets, spring clips, screws and wall plugs are all included
🔌 Plug-together wiring - the panel and driver join with a keyed push connector, so only the mains side needs wiring in
📐 Paper cutting template included - mark and cut the ceiling hole accurately first time
✅ CE and RoHS marked - as printed on the retail box and on the driver label

📋 How To Use

Isolate the lighting circuit at the consumer unit before starting.
Use the supplied circular template to mark the ceiling, then cut the opening.
Connect the mains supply to the input tails of the "Dimmable LED Driver".
Push the driver's output connector onto the matching lead on the back of the panel.
Tuck the driver into the ceiling void, fold the sprung clips upwards and push the panel into the hole until the rim sits flush.
Restore power and test, including through the dimmer if one is fitted.

⚠️ Mains voltage product - installation should be carried out by a competent or qualified person in line with local wiring regulations. Do not cover the driver with insulation. Exact cut-out diameter, colour temperature and IP rating are not legible on the packaging shown, so please measure your existing hole before purchase.

✔️ Compatible With

Plasterboard, dot-and-dab and suspended/grid ceilings; ideal as an upgrade from older 6 inch halogen or CFL recessed cans in kitchens, bathrooms fitted with suitable protection, hallways, landings, bedrooms, offices, shops and salons. Sized as a 6 inch (150mm class) round panel, so it suits existing 6 inch downlight openings - check your cut-out first. The manufacturer supplies it with a driver labelled "Dimmable LED Driver" for use on a mains dimmer switch; as with all LED drivers, confirm compatibility with your specific dimmer model (leading or trailing edge) before installing.