Tech Data: Thread Pitch: M14x1.5 · Lug Nut Height: 46 mm · Lug Nut Depth: 42 mm · Lug Nut Flange: 23 mm(0.9Inch) ? full specs below Fitment: Chevrolet:
  • Corvette 20-Now
  • Camaro 10-24
  • Impala 14-20
  • SS 14-17
  • Caprice 11-17
  • Equinox 10-17
  • Malibu Limited 16
  • Malibu 12-15
  • Express 1500 96-02
  • Tahoe 95-00
  • Silverado 95-99
  • Suburban 1500 95-99
  • C1500 Suburban 92-99
  • C1500 88-99
  • Suburban 92-94
IMPORTANT FITMENT NOTICE: Important: ? Match the 60-degree cone seat contact face ? Check nut waist/body diameter clears the lug hole ? Stud length must not exceed the 42mm closed-nut depth ? Compare size with original nuts b? eBay's chart confirms thread pitch only ? unsure? Message us and we'll verify fitment before you buy.
ESPLUS
Precision wheel hardware
Exact specificationsThread, seat, size and quantity Fitment before claimsVehicle and wheel checks separated Listing-level termsShipping and returns stay current eBay message supportApplication context stays together
Lug Nuts
Mag Seat OEM Lug Nuts Duplex Conical OEM Lug Nuts Regular Acorn Lug Nuts Long Acorn Lug Nuts Open End Lug Nuts Spline Lug Nuts
Lug Bolts
Ball Seat Lug Bolts Cone Seat Lug Bolts
Wheel Locks
Locker Lug Nuts Locker Lug Bolts
Wheel Spacers
Hubcentric Spacer with Ball Seat Bolts Hubcentric Spacer with Cone Seat Bolts
Wheel Adapters
5 Lug Adapter 6 Lug Adapter 8 Lug Adapter 5 Lug Hubcentric Adapter 6 Lug Hubcentric Adapter
Precision wheel hardware · Fitment-first specification

Bulge Acorn Cone Seat Lug Nuts

46mm Overall Height
3/4 in hex drive; 23mm flange

[10] Chrome M14x1.5 Acorn Lug Nuts 1.8" Tall for Chevrolet Equinox Camaro Malibu

Direct-fit upgrade for Chevrolet owners ? confirm your exact year and model in the compatibility chart below before ordering. Closed-End Wheel Fasteners For Aftermarket Wheels For Steel Wheels Direct Swap With Matching Fit
Fitment-first engineering [10] Chrome M14x1.5 Acorn Lug Nuts 1.8
01 · Order scopeConfirm the exact quantity.Use the listing title and the technical data as the order reference, not the vehicle photograph.
02 · Vehicle sideConfirm thread and application.Read the compatibility section and every fitment note before ordering.
03 · Wheel sideConfirm the actual wheel hardware.Match seat geometry, diameter, clearance, depth and usable thread engagement.
Technical Data

Numbers, not adjectives.

Every dimension your wheel cares about ? measured, verified, documented.

M14x1.5 Extended Acorn Lug Nut

Type · Acorn 60 Degree Conical Lug Nut
×10 PCS/Set
Thread Pitch
M14x1.5
Lug Nut Height
46 mm
Lug Nut Depth
42 mm
Lug Nut Flange
23 mm(0.9Inch)
Lug Nut Seat
60 Degree Conical
Color and Finish
Chrome
Drive
3/4"
Tool Requirement
3/4" Hex Socket
Material Made
SCM Carbon Steel
Quantity Per Order
10 Pcs
California Prop 65 Warning
WARNING: This product can expose you to chemicals including Nickel and Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Vehicle Compatibility

Fits your car.
Verified, not guessed.

Bulge acorn cone seat lug nuts for aftermarket and steel wheels. Match the 60-degree cone seat, body clearance and closed-nut depth to the wheel and studs.

1
Brands
15
Vehicles
3
Regions
NA

United States

1 Featured

Chevrolet

United States · 15 models
Stock Alloy Wheel
Stock Steel Wheel
Aftermarket Wheel
Wheel with Cap
Model
Region
Year Range
C1500
MX/US/CA
1988-1999
C1500 Suburban
US
1992-1999
Camaro
MX
2010-2024
Caprice
US
2011-2017
Corvette
MX/US
2020-Current
Equinox
US
2010-2017
Express 1500
1996-2002
Impala
US
2014-2020
Malibu
2012-2015
Malibu Limited
2016
SS
US
2014-2017
Silverado
MX
1995-1999
Suburban
MX
1992-1994
Suburban 1500
MX
1995-1999
Tahoe
CA
1995-2000

Not sure? Message us ? we verify your exact year & model before you buy.

Product Display

A closer look at the product.

Finish, geometry, and packaging — from every angle. Tap a thumbnail to view.

Close-up of chrome closed-end lug nuts, 3/4? hex, M14x1.5 thread, 46 mm tall, cone seat, sold in sets of 10
Chrome closed-end lug nuts, 3/4? hex, M14x1.5 thread, 46 mm tall, cone seat
Chrome closed-end lug nuts, 3/4? hex, M14x1.5 thread, 46 mm tall, cone seat
Check Before You Order

Some fitment details only your vehicle can tell you.

The vehicle list above confirms your year, make and model. The points below are not part of that list — they depend on the wheels and hardware currently on your vehicle. Please verify them before ordering.

How to identify cone-seat lug nut fitment: 60-degree tapered seat, thread size, overall height and hex size
How to identify cone-seat lug nut fitment: 60-degree tapered seat, thread size, overall height and hex size
How to identify cone-seat lug nut fitment: 60-degree tapered seat, thread size, overall height and hex size
Why It's Built Different

Performance you can torque down.

Conical Load Contact

The 60-degree cone seat carries clamping load against a matching wheel seat, with a field-backed 23mm flange.

Covered Stud Ends

The closed end covers the stud tip while the cone seat clamps the wheel; proper fit keeps the stud within the nut cavity.

Familiar Socket Access

The hex drive accepts a 3/4 in socket, allowing installation and removal with matching hand tools.

Defined Outside Profile

The 46mm overall height gives the nut a defined outside profile for comparison with the original nut and available wheel space.

How to Install

3 steps to torque.

Follow the sequence below ? fitment is everything, so read Step 1 carefully.

01

Verify Wheel And Nut Fit

Compare the original nut with this listing. Match the seat, thread and body clearance, then clean the wheel seat and hub mounting face.

An incorrect seat or obstructed lug hole prevents proper clamping.
02

Hand-Start The Nuts

Place the wheel flat against the hub and hand-start the lug nuts. Confirm free threading and full seat contact.

Stop if a nut binds or bottoms out before reaching the wheel seat.
03

Tighten In A Star Pattern

Use the correct socket and a torque wrench. Tighten evenly in a star pattern to the vehicle specification.

Follow the vehicle service guidance for torque and subsequent checks.
Lug nut installation guide: hand-thread each nut, tighten in a star pattern, then torque to the vehicle specification
Lug nut installation guide: hand-thread each nut, tighten in a star pattern, then torque to the vehicle specification
Lug nut installation guide: hand-thread each nut, tighten in a star pattern, then torque to the vehicle specification
Lug nut installation guide: hand-thread each nut, tighten in a star pattern, then torque to the vehicle specification
01 / 4

Important Fitment Notice

Important:
  • Match the 60-degree cone seat contact face
  • Check nut waist/body diameter clears the lug hole
  • Stud length must not exceed the 42mm closed-nut depth
  • Compare size with original nuts before ordering
  • Stock alloy wheels require matching OEM cone seats
  • Dually: 32 fasteners across four hubs

eBay's compatibility list matches by vehicle only. The wheel-side facts above — seat geometry, hole clearance, installed depth and usable thread engagement — still need your own check. Message us through eBay before ordering if anything is unclear.

Why ESPLUS

Clarity before checkout.

Wheel hardware is fit-critical. Our listing structure keeps the evidence a buyer needs in the order it should be checked.

Specification First

Thread, seat, dimensions, finish and quantity are organized for direct comparison.

Fitment in Two Layers

Vehicle compatibility and wheel-specific hardware checks are presented separately.

Component-Level Detail

Combination listings keep each component's quantity, gallery and technical data distinct.

Pre-Purchase Support

Message us through eBay with your year, model, wheel and current hardware details.

Questions, answered

Check the details that decide fit.

Will this wheel hardware fit my exact vehicle?
Start with the vehicle compatibility section, then read every fitment note. Compatibility data does not replace wheel-side checks such as seat type, hardware dimensions, hole clearance and usable thread engagement.
How do I confirm thread pitch and seat type?
Compare one piece of your existing hardware with the technical data and the Check Before You Order images. Match the thread on the vehicle side and the seat geometry required by the wheel.
What should I verify on aftermarket wheels?
Confirm the wheel's seat profile, fastener-hole diameter, tool clearance, installed depth and required engagement. These wheel-specific facts are not established by year, make and model alone.
What torque specification should I use?
Use the vehicle or wheel manufacturer's applicable specification and installation procedure. If the two sources differ or the application is modified, consult a qualified installer before installation.
Where can I find current shipping and return terms?
Use the Shipping, delivery and Returns sections of this eBay listing as the current order-level terms. Those listing controls take priority over general informational text.
Shipping · Returns · Fitment

Order terms, kept current.

The controls attached to this eBay listing are the source of truth for the transaction.

Shipping

Review the handling time, delivery estimate and available services shown on this listing. Tracking is provided through the eBay order when available.

Returns

The return window, eligibility and conditions shown in this listing govern the order. Start any return request from the eBay purchase record.

Fitment Responsibility

Confirm the listed thread, seat, dimensions, clearance and quantity before installation. When uncertain, message us through eBay before ordering.

About ESPLUS

Precision wheel hardware.
Clarity built into every listing.

ESPLUS focuses on wheel fastening hardware and fitment-critical accessories. We organize product specifications, vehicle application data, wheel-side checks and installation guidance so buyers can compare the right facts before ordering.

Visit Our eBay Store
Store Home Feedback About Us Contact via eBay Follow Store
Copyright 2026 Eaglestart Supply Inc. · ESPLUS