Tech Data: Thread Pitch: M12x1.5 · Lug Nut Height: 36 mm · Lug Nut Depth: 32 mm · Lug Nut Flange: 23 mm(0.9Inch) ? full specs below Fitment: Honda:
  • HR-V 16-Now
  • Civic 04-Now
  • Accord 97-Now
  • CR-V 97-Now
  • BR-V 19-25
  • Insight 19-22
  • Clarity 17-21
  • Clarity Plug-In Hybrid 18
  • CR-Z 11-16
  • Crosstour 12-15
  • Accord Crosstour 10-11
  • Element 03-11
  • S2000 00-09
  • Pilot 03-08
  • Odyssey 95-04
  • Prelude 96-01
IMPORTANT FITMENT NOTICE: Important: ? Match the 60-degree cone seat contact face ? Check nut waist/body diameter clears the lug hole ? Stud length must not exceed the 32mm closed-nut depth ? Compare size with original nuts b? eBay's chart confirms thread pitch only ? unsure? Message us and we'll verify fitment before you buy.
ESPLUS
Precision wheel hardware
Exact specificationsThread, seat, size and quantity Fitment before claimsVehicle and wheel checks separated Listing-level termsShipping and returns stay current eBay message supportApplication context stays together
Lug Nuts
Mag Seat OEM Lug Nuts Duplex Conical OEM Lug Nuts Regular Acorn Lug Nuts Long Acorn Lug Nuts Open End Lug Nuts Spline Lug Nuts
Lug Bolts
Ball Seat Lug Bolts Cone Seat Lug Bolts
Wheel Locks
Locker Lug Nuts Locker Lug Bolts
Wheel Spacers
Hubcentric Spacer with Ball Seat Bolts Hubcentric Spacer with Cone Seat Bolts
Wheel Adapters
5 Lug Adapter 6 Lug Adapter 8 Lug Adapter 5 Lug Hubcentric Adapter 6 Lug Hubcentric Adapter
Precision wheel hardware · Fitment-first specification

Bulge Acorn Cone Seat Lug Nuts

36mm Overall Height
3/4 in hex drive; 23mm flange

[20] Black M12x1.5 Acorn Lug Nuts 36mm Tall for Honda CR-V Accord Civic HR-V

Direct-fit upgrade for Honda owners ? confirm your exact year and model in the compatibility chart below before ordering. Closed-End Wheel Fasteners For Aftermarket Wheels For Steel Wheels Direct Swap With Matching Fit
Fitment-first engineering [20] Black M12x1.5 Acorn Lug Nuts 36mm Tall for Honda CR-V Accord Civic HR-V
01 · Order scopeConfirm the exact quantity.Use the listing title and the technical data as the order reference, not the vehicle photograph.
02 · Vehicle sideConfirm thread and application.Read the compatibility section and every fitment note before ordering.
03 · Wheel sideConfirm the actual wheel hardware.Match seat geometry, diameter, clearance, depth and usable thread engagement.
Technical Data

Numbers, not adjectives.

Every dimension your wheel cares about ? measured, verified, documented.

M12x1.5 Acorn Lug Nut

Type · Acorn 60 Degree Conical Lug Nut
×20 PCS/Set
Thread Pitch
M12x1.5
Lug Nut Height
36 mm
Lug Nut Depth
32 mm
Lug Nut Flange
23 mm(0.9Inch)
Lug Nut Seat
60 Degree Conical
Color and Finish
Black
Drive
3/4"
Tool Requirement
3/4" Hex Socket
Material Made
SCM Carbon Steel
Quantity Per Order
20 Pcs
California Prop 65 Warning
WARNING: This product can expose you to chemicals including Nickel and Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Vehicle Compatibility

Fits your car.
Verified, not guessed.

Bulge acorn cone seat lug nuts for aftermarket and steel wheels. Match the 60-degree cone seat, body clearance and closed-nut depth to the wheel and studs.

1
Brands
16
Vehicles
3
Regions
AS

Japan

1 Featured

Honda

Japan · 16 models
Stock Alloy Wheel
Stock Steel Wheel
Aftermarket Wheel
Wheel with Cap
Model
Region
Year Range
Accord
US/CA/MX
1997-Current
Accord Crosstour
US
2010-2011
BR-V
MX
2019-2025
CR-V
MX/CA/US
1997-Current
CR-Z
US/CA
2011-2016
Civic
US/CA/MX
2004-Current
Clarity
US
2017-2021
Clarity Plug-In Hybrid
US
2018
Crosstour
US
2012-2015
Element
2003-2011
HR-V
US/MX/CA
2016-Current
Insight
US
2019-2022
Odyssey
US/MX
1995-2004
Pilot
US/CA
2003-2008
Prelude
1996-2001
S2000
US
2000-2009

Not sure? Message us ? we verify your exact year & model before you buy.

Product Display

A closer look at the product.

Finish, geometry, and packaging — from every angle. Tap a thumbnail to view.

Close-up of black closed-end lug nuts, 3/4? hex, M12x1.5 thread, 36 mm tall, cone seat, sold in sets of 20
Black closed-end lug nuts, 3/4? hex, M12x1.5 thread, 36 mm tall, cone seat
Black closed-end lug nuts, 3/4? hex, M12x1.5 thread, 36 mm tall, cone seat
Check Before You Order

Some fitment details only your vehicle can tell you.

The vehicle list above confirms your year, make and model. The points below are not part of that list — they depend on the wheels and hardware currently on your vehicle. Please verify them before ordering.

How to identify cone-seat lug nut fitment: 60-degree tapered seat, thread size, overall height and hex size
How to identify cone-seat lug nut fitment: 60-degree tapered seat, thread size, overall height and hex size
How to identify cone-seat lug nut fitment: 60-degree tapered seat, thread size, overall height and hex size
Why It's Built Different

Performance you can torque down.

Conical Load Contact

The 60-degree cone seat carries clamping load against a matching wheel seat, with a field-backed 23mm flange.

Covered Stud Ends

The closed end covers the stud tip while the cone seat clamps the wheel; proper fit keeps the stud within the nut cavity.

Familiar Socket Access

The hex drive accepts a 3/4 in socket, allowing installation and removal with matching hand tools.

Defined Outside Profile

The 36mm overall height gives the nut a defined outside profile for comparison with the original nut and available wheel space.

How to Install

3 steps to torque.

Follow the sequence below ? fitment is everything, so read Step 1 carefully.

01

Verify Wheel And Nut Fit

Compare the original nut with this listing. Match the seat, thread and body clearance, then clean the wheel seat and hub mounting face.

An incorrect seat or obstructed lug hole prevents proper clamping.
02

Hand-Start The Nuts

Place the wheel flat against the hub and hand-start the lug nuts. Confirm free threading and full seat contact.

Stop if a nut binds or bottoms out before reaching the wheel seat.
03

Tighten In A Star Pattern

Use the correct socket and a torque wrench. Tighten evenly in a star pattern to the vehicle specification.

Follow the vehicle service guidance for torque and subsequent checks.
Lug nut installation guide: hand-thread each nut, tighten in a star pattern, then torque to the vehicle specification
Lug nut installation guide: hand-thread each nut, tighten in a star pattern, then torque to the vehicle specification
Lug nut installation guide: hand-thread each nut, tighten in a star pattern, then torque to the vehicle specification
Lug nut installation guide: hand-thread each nut, tighten in a star pattern, then torque to the vehicle specification
01 / 4

Important Fitment Notice

Important:
  • Match the 60-degree cone seat contact face
  • Check nut waist/body diameter clears the lug hole
  • Stud length must not exceed the 32mm closed-nut depth
  • Compare size with original nuts before ordering
  • Stock alloy wheels require matching OEM cone seats

eBay's compatibility list matches by vehicle only. The wheel-side facts above — seat geometry, hole clearance, installed depth and usable thread engagement — still need your own check. Message us through eBay before ordering if anything is unclear.

Why ESPLUS

Clarity before checkout.

Wheel hardware is fit-critical. Our listing structure keeps the evidence a buyer needs in the order it should be checked.

Specification First

Thread, seat, dimensions, finish and quantity are organized for direct comparison.

Fitment in Two Layers

Vehicle compatibility and wheel-specific hardware checks are presented separately.

Component-Level Detail

Combination listings keep each component's quantity, gallery and technical data distinct.

Pre-Purchase Support

Message us through eBay with your year, model, wheel and current hardware details.

Questions, answered

Check the details that decide fit.

Will this wheel hardware fit my exact vehicle?
Start with the vehicle compatibility section, then read every fitment note. Compatibility data does not replace wheel-side checks such as seat type, hardware dimensions, hole clearance and usable thread engagement.
How do I confirm thread pitch and seat type?
Compare one piece of your existing hardware with the technical data and the Check Before You Order images. Match the thread on the vehicle side and the seat geometry required by the wheel.
What should I verify on aftermarket wheels?
Confirm the wheel's seat profile, fastener-hole diameter, tool clearance, installed depth and required engagement. These wheel-specific facts are not established by year, make and model alone.
What torque specification should I use?
Use the vehicle or wheel manufacturer's applicable specification and installation procedure. If the two sources differ or the application is modified, consult a qualified installer before installation.
Where can I find current shipping and return terms?
Use the Shipping, delivery and Returns sections of this eBay listing as the current order-level terms. Those listing controls take priority over general informational text.
Shipping · Returns · Fitment

Order terms, kept current.

The controls attached to this eBay listing are the source of truth for the transaction.

Shipping

Review the handling time, delivery estimate and available services shown on this listing. Tracking is provided through the eBay order when available.

Returns

The return window, eligibility and conditions shown in this listing govern the order. Start any return request from the eBay purchase record.

Fitment Responsibility

Confirm the listed thread, seat, dimensions, clearance and quantity before installation. When uncertain, message us through eBay before ordering.

About ESPLUS

Precision wheel hardware.
Clarity built into every listing.

ESPLUS focuses on wheel fastening hardware and fitment-critical accessories. We organize product specifications, vehicle application data, wheel-side checks and installation guidance so buyers can compare the right facts before ordering.

Visit Our eBay Store
Store Home Feedback About Us Contact via eBay Follow Store
Copyright 2026 Eaglestart Supply Inc. · ESPLUS