Create stunning custom lighting effects with this WS2812B COB Addressable RGB LED Strip, featuring individually addressable LEDs, a seamless COB light effect, and a flexible 5mm-wide design. Perfect for DIY lighting projects, PC setups, gaming rooms, TV backlighting, automotive interiors, and smart LED installations.
Important Before Purchase
Requires a compatible WS2812B LED controller (not included).
Requires a 5V DC power supply (not included).
Do not exceed 5.5V, as higher voltage may damage the LED strip.
Key Features
Individually Addressable RGB LEDs – Create dynamic lighting effects with compatible controllers.
COB Seamless Lighting – Uniform light output with minimal visible light spots.
180° Wide Beam Angle – Broad illumination for smooth lighting effects.
Flexible 5mm PCB – Easily bends around curves and corners.
High-Bond Adhesive Backing – Quick and secure installation on clean surfaces.
High Color Rendering – CRI greater than 90 for vibrant color reproduction.
Available in Multiple LED Densities – Choose the brightness level that suits your project.
Available LED Density Options
LED Density | Power Consumption |
|---|---|
60 LEDs/m | 4.5W/m |
100 LEDs/m | 7.5W/m |
120 LEDs/m | 9W/m |
160 LEDs/m | 12W/m |
200 LEDs/m | 15W/m |
Product Specifications
Feature | Specification |
|---|---|
LED Type | WS2812B COB |
Voltage | DC 5V |
PCB Width | 5mm |
Beam Angle | 180° |
CRI | Ra ＞90 |
Operating Temperature | -20°C to +45°C |
Storage Temperature | -20°C to +60°C |
Cutting Guide
Cut only at the designated cutting points.
LED Density | Cutting Interval |
|---|---|
60 LEDs/m | Every LED |
100 LEDs/m | Every LED |
120 LEDs/m | Every LED |
160 LEDs/m | Every 2 LEDs |
200 LEDs/m | Every 2 LEDs |
Ideal For
Suitable for a wide range of DIY lighting projects, including:
Gaming Room Lighting
PC Case RGB Mods
TV Backlighting
Cabinet Lighting
Automotive Interior Lighting
Desk & Shelf Lighting
Smart Home Projects
Arduino & ESP32 Projects
Raspberry Pi LED Projects
Decorative Lighting
Installation Tips
Use only a 5V DC power supply.
Connect to a compatible WS2812B controller before use.
Install on a clean, dry surface for the best adhesive performance.
For longer runs, inject additional power as needed to help maintain brightness consistency.
Package Includes
1 × WS2812B COB Addressable LED Strip (selected LED density)
Controller and power supply are not included.
Important Notes
Compatible with many WS2812B controllers and programmable RGB systems.
Do not connect directly to voltages above 5.5V.
Product appearance and measurements may vary slightly due to production batches.
WS2812B COB LED strip, 5V addressable LED strip, RGB smart LED strip, individually addressable LED tape, COB RGB strip, Arduino LED strip, ESP32 LED strip, Raspberry Pi LED strip, gaming room LED lights, TV backlight strip, flexible RGB light tape, programmable LED strip, 60 LED meter, 120 LED meter, 200 LED meter.
