Description
USB Interface Adapter with 5000V Electrical Isolation Compatible with USB-TO-GPIO for TI
Description:
The China-made USB interface adapter is fully compatible with the imported USB-TO-GPIO 2006 version. It supports official online upgrade for TI, such as 1.0.xx and 2.0.xx and other firmware supported by all imported boards can be directly upgraded or downgraded by USB.
USB-TO-GPIO with isolation function uses the magnetic isolation technology (for ADI) to achieve stable performance, high speed, low power consumption, high reliability, and small-sized and highly integrated digital isolation. Its power supply is isolated by Flyback. It can achieve complete electrical isolation of input and output.
This EVM serves as an interface adapter or a bridge between a host PC and one or multiple targeted devices through a standard type-A to mini-B USB cable. The communication between the USB interface adapter and the host PC is via USB, while the communication between the USB interface adapter and the target device(s) is through an inter-integrated circuit (I2C), SMBus, PMBus, general-purpose inputs and outputs GPIOs or both. The bridge converts communication transactions between the USB and serial protocols. It is also compatible with USB-PMBus Adapter Kit KEP91017 for FLEX.
Application:
1. Working environment containing strong electricity and strong interference.
2. Noise-sensitive field. Computers are a big source of noise. In noise-sensitive areas, we can isolate the USB interface through this device. It can be used with high precision ADCs, op amps, voltage and current sampling, comparators, etc.
3. All kinds of industrial control equipment. Sometimes it is necessary to extend a USB cable to isolate the ground voltage difference between upstream and downstream equipment.
Features:
- Supports primary mode I2C, SMBus or PMBus as well as GPIO
- Supports USB1.1 full speed (12Mbps). The host recognizes the USB interface adapter as a universal Human Interface Device (HID), so no dedicated USB or HID driver is required. Therefore, the USB interface adapter can be used as a USB plug-and-play device
- Selects different clock speeds 100 kHz or 400 kHz for I2C, PMBus, or SMBus communications
- Configure different pull-up resistors for clock, data, and ALERT signals including open-drain
- Supports flexible I2C read or write transactions (specify raw data, not device address, commands, etc.)
- Contains .NET DLL to enable the adapter support Windows .NET GUI
- There is no dependency on any Windows products other than Microsoft .NET Framework version 2.0
Package Included:
- 1 x USB interface adapter
- 1 x USB-A to USB Mini cable or USB-A to USB-B cable
- 1 x FC-10P cable with connectors on both ends
Description:
The China-made USB interface adapter is fully compatible with the imported USB-TO-GPIO 2006 version. It supports official online upgrade for TI, such as 1.0.xx and 2.0.xx and other firmware supported by all imported boards can be directly upgraded or downgraded by USB.
USB-TO-GPIO with isolation function uses the magnetic isolation technology (for ADI) to achieve stable performance, high speed, low power consumption, high reliability, and small-sized and highly integrated digital isolation. Its power supply is isolated by Flyback. It can achieve complete electrical isolation of input and output.
This EVM serves as an interface adapter or a bridge between a host PC and one or multiple targeted devices through a standard type-A to mini-B USB cable. The communication between the USB interface adapter and the host PC is via USB, while the communication between the USB interface adapter and the target device(s) is through an inter-integrated circuit (I2C), SMBus, PMBus, general-purpose inputs and outputs GPIOs or both. The bridge converts communication transactions between the USB and serial protocols. It is also compatible with USB-PMBus Adapter Kit KEP91017 for FLEX.
Application:
1. Working environment containing strong electricity and strong interference.
2. Noise-sensitive field. Computers are a big source of noise. In noise-sensitive areas, we can isolate the USB interface through this device. It can be used with high precision ADCs, op amps, voltage and current sampling, comparators, etc.
3. All kinds of industrial control equipment. Sometimes it is necessary to extend a USB cable to isolate the ground voltage difference between upstream and downstream equipment.
Features:
- Supports primary mode I2C, SMBus or PMBus as well as GPIO
- Supports USB1.1 full speed (12Mbps). The host recognizes the USB interface adapter as a universal Human Interface Device (HID), so no dedicated USB or HID driver is required. Therefore, the USB interface adapter can be used as a USB plug-and-play device
- Selects different clock speeds 100 kHz or 400 kHz for I2C, PMBus, or SMBus communications
- Configure different pull-up resistors for clock, data, and ALERT signals including open-drain
- Supports flexible I2C read or write transactions (specify raw data, not device address, commands, etc.)
- Contains .NET DLL to enable the adapter support Windows .NET GUI
- There is no dependency on any Windows products other than Microsoft .NET Framework version 2.0
Package Included:
- 1 x USB interface adapter
- 1 x USB-A to USB Mini cable or USB-A to USB-B cable
- 1 x FC-10P cable with connectors on both ends
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
Am 20.08.2026 hat der Verkäufer die folgenden Angaben hinzugefügt: