Modelux 'Hersham' Viaduct System - Single Module, Single Track

THIS IS FOR A SINGLE ARCH FOR PURCHASE AS A TRIAL OR TO USE AS AN ADDITIONAL ARCH TO THE MULTIPACK...FOR THE MULTIPACK, PLEASE SEE THE OTHER LISTING,,,,

This viaduct takes a single track - it is designed so that two can go side by side if a double track is required - viaducts were often limited to a single track to save build costs....

All the dimensions are on the data sheet photo

Each module can be adjusted to size prior to assembly to lower the whole array or to allow the viaduct to integrate into the slopes or cutting at either end of the array.

As many modules as you wish can be joined together to create the array

This is for a single module, although discounts are available for multiple purchases.

The kit is flat pack and PVA is required for assembly.

This is a single arch, primarily intended as a 'test' kit - there are no downspouts provided with this.

Plastic posts straddle the railings forming a seamless run.

The kit features Modelux Invisiseam providing a near invisible join between elevations.

The brick print is UV resistant litho-printed bonded using 3M adhesive to 1.3mm multicore board for the flat elevation sections, and 300GSM Flexcore for the arches.

The whole assembly is strong and rigid and very realistic and is easy to weather.