Honeycomb Paper Stretching Machine Packing Paper Roll Dispenser 19.7" Width 30W
The packing paper roll dispenser is an electric paper feeding device specially designed for environmentally-friendly packaging materials, such as honeycomb paper, white paper and kraft paper. It can efficiently accomplish stretching forming of honeycomb paper, and rolling/knurling treatment of kraft paper and white paper with the maximum width of 50cm. It can quickly discharge paper at the adjustable speed of 6-22m/min, saving time and labor and improving the packing efficiency. The packing paper roll dispenser is an ideal choice for packaging workshops, e-commerce warehouses and other scenarios.
Product Parameters
| Voltage | AC 110V 60Hz |
| Power | 30W |
| Working Speed | 19.7-72.2ft/min (6-22m/min) Tolerance: ±6.5ft/min (2m/min) |
| Material Shaft Diameter | 0.8'' (20.5mm) |
| Maximum Applicable Roll Diameter | 9.8'' (25cm) |
| Maximum Applicable Roll Width | 19.7'' (50cm) |
| Packing dimension | 28.94*17.52*9.65 inches (73.5*44.5*24.5cm) |
| Net weight / Gross weight | 44.4LB (20.15kg) / 52.6LB (23.85kg) |
Precaution
1. Confirm the power supply used conforms to the voltage specified on the machine nameplate, and ensure reliable grounding is conducted.
2. When moving or handling the machine, do not invert it. Place it on a stable and level surface; do not place it at the inclined position. Do not place heavy objects on the machine.
3. While the machine is in operation, never touch any moving parts or components.
4. When the machine is powered on, never touch the blades with your hands to avoid cutting injuries.
5. When disassembling the machine, it must be in a power-off state.
6. Do not arbitrarily disassemble or modify the machine.
7. The machine is strictly prohibited from idling, or running without materials, or being powered on without reliable grounding!
2. When moving or handling the machine, do not invert it. Place it on a stable and level surface; do not place it at the inclined position. Do not place heavy objects on the machine.
3. While the machine is in operation, never touch any moving parts or components.
4. When the machine is powered on, never touch the blades with your hands to avoid cutting injuries.
5. When disassembling the machine, it must be in a power-off state.
6. Do not arbitrarily disassemble or modify the machine.
7. The machine is strictly prohibited from idling, or running without materials, or being powered on without reliable grounding!
Product Features
1. High stability: Equipped with double feeding shafts, capable of smoothly feeding different packaging materials, avoiding deviation and slippage and improving the supporting stability.
2. Independent control: Adopting the automatic/foot switch control mode, liberating double hands, improving the packaging efficiency and reducing the labor intensity.
3. Good durability: Made of thickened metal materials, stable in structure, not prone to shaking, long in service life and easy to clean and maintain.
4. Low noise: Optimizing the transmission mechanism, effectively reducing the operation noise and avoiding interference to the working environments.
2. Independent control: Adopting the automatic/foot switch control mode, liberating double hands, improving the packaging efficiency and reducing the labor intensity.
3. Good durability: Made of thickened metal materials, stable in structure, not prone to shaking, long in service life and easy to clean and maintain.
4. Low noise: Optimizing the transmission mechanism, effectively reducing the operation noise and avoiding interference to the working environments.
Control Panel
The control panel integrates the digital display and control buttons, the manual and automatic control mode can be easily selected to meet different operating demands, the feeding length, quantity and speed can also be freely adjusted as needed, and the practicability is higher.
Material Shafts
The double material shafts can be used independently or simultaneously to support the roll paper with the maximum width of 50cm, effectively fix the paper rolls in the feeding process to avoid deviation and shaking and ensure the packaging paper is fed smoothly.
Foot Switch
The foot switch is designed for manually controlling the packaging paper to be fed as needed, liberating double hands of the operator, greatly reducing the labor intensity and meeting the ergonomic standard.
Rolling Wheels
Multiple rows of rolling wheels are adopted to evenly stretch the honeycomb paper in the feeding process so as to form neatly three-dimensional grids, can provide the stable pulling force to ensure smooth paper feeding.
Operation Method
(I) Installation Method
1. Place the honeycomb paper roll on the material shaft.
2. Position the material shaft on the shaft support plates.
3. Attach 2 roll rings (found in the installation kit) on both sides of the material shaft, and then add another two rings on the outer sides of the shaft support plates from both sides.
4. Manually pull the honeycomb paper to the back and place the edge of the paper into the inlet. Press the Forward button to pull it through until it comes out of the paper outlet.
5. Repeat the steps 1, 2, and 3 to install the white paper roll, then pull the edge of the white paper into the white paper inlet and press Start/Stop key to allow it to come out of the white paper outlet.
(II) Operation Modes
1. Manual Mode: In the manual mode, you can only adjust the speed.
Press the Function button until you see the sign * at the speed option and then press the Up/Down buttons to adjust the speed. Then press the Start/Stop button to control the machine’s start and stop functions or use the foot pedal.
2. Automatic Mode: In the automatic mode, you can adjust the time or length and speed.
If the machine is set on a different mode, simply press the Function button until it switches to the next mode. Then explore the options by using the Function button. When at the Timer option, use the Up/Down button to adjust the time, press the Function button again, and then press the Up/Down button to switch ON/OFF. To adjust the Length, simply follow the same process.
Please note that in this mode, you will be able to use either the Timer or Length and not both together, so when you switch ON one, it will automatically turn OFF the other. Don’t forget to set the speed you desire and press the Start/Stop button. You can always start or stop the machine by using the foot pedal at any given time.
1. Place the honeycomb paper roll on the material shaft.
2. Position the material shaft on the shaft support plates.
3. Attach 2 roll rings (found in the installation kit) on both sides of the material shaft, and then add another two rings on the outer sides of the shaft support plates from both sides.
4. Manually pull the honeycomb paper to the back and place the edge of the paper into the inlet. Press the Forward button to pull it through until it comes out of the paper outlet.
5. Repeat the steps 1, 2, and 3 to install the white paper roll, then pull the edge of the white paper into the white paper inlet and press Start/Stop key to allow it to come out of the white paper outlet.
(II) Operation Modes
1. Manual Mode: In the manual mode, you can only adjust the speed.
Press the Function button until you see the sign * at the speed option and then press the Up/Down buttons to adjust the speed. Then press the Start/Stop button to control the machine’s start and stop functions or use the foot pedal.
2. Automatic Mode: In the automatic mode, you can adjust the time or length and speed.
If the machine is set on a different mode, simply press the Function button until it switches to the next mode. Then explore the options by using the Function button. When at the Timer option, use the Up/Down button to adjust the time, press the Function button again, and then press the Up/Down button to switch ON/OFF. To adjust the Length, simply follow the same process.
Please note that in this mode, you will be able to use either the Timer or Length and not both together, so when you switch ON one, it will automatically turn OFF the other. Don’t forget to set the speed you desire and press the Start/Stop button. You can always start or stop the machine by using the foot pedal at any given time.
Item Number: 1 x Electric Honeycomb Paper Stretching Machine 110V 033451
| Shipping & Handling Details |
|---|
|
Default Shipping Cost or Free Shipping Information: ▲ Default shipping cost or free shipping service is only for the lower 48 United States by UPS Ground or USPS. Other areas or needs other shipping ways, please contact us. ▲ Buyers from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO addresses or other countries/areas, there WILL be extra shipping costs, please contact us for more detailed information. ▲ Please make sure your address is valid for both UPS and USPS services. Any costs incurred because of incorrect or undeliverable address should be undertaken by buyer. Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays. Sales tax / Customs duties: Any sales taxes or Customs duties are not included. If came out, they must be undertaken by the buyer. Damage In Shipping: Email or call us First! We will work with you to get the case resolved in the fastest method. |
| Return / Refund |
|
If you are not 100% happy with your purchase, please contact Us. Please don't directly opened a request or case without informing us, or else, we will do some discounts on the warranty and other sales-services later on. Hope for your understanding. Returns & Exchanges ▲ All returns must be made within 30 days of delivery date. Items must be in new, unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on the condition. ▲ Items returned under the buyer’s remorse: The return shipping fee must be covered by the buyer; The original shipping cost will also be deducted from the refund. 15% restocking fee of the items purchase price will be charged. ▲ Returns that are the result of our seller's error: Buyer will receive a full refund of the item as well as shipping charges ▲ All returns require a RA (Return Authorization) number that will be given by our seller. Please contact with us at first for more details. Defective & Damaged Products ▲ If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it's much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding. ▲ Replacement or refund of defective or damaged products can only be returned in exchange for the exact same product, or else, the purchase price will be refunded back to your original payment method. ▲ If an item is received damaged, customer service must be contacted within 7 days of receiving your item. All returns require a RA (Return Authorization) number as above. |
| Warranty & Feedback |
|
▲ 6 months' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost. ▲ Any warranty shipping cost to us is responsible by buyer. ▲ Any shipping cost to buyer is responsible by the seller. ▲ We committee to the customer satisfaction and want to bring you the best purchase experience. If there is any problems, please contact us ASAP. If not, please leave us a positive feedback as it's very important for us. Thanks very much. |
On Jul 16, 2026 at 23:35:24 PDT, seller added the following information: