1x Dental LED Curing Light Wireless Cure Lampe Starke und langlebige Lichtspitze

Dental LED Polymerisationslampe für die Lichthärtung

Features:
Struktur und Komponenten:
Lichtleiter, kreisförmige Augenschutz;
Netzteil; Ladestation;
Handstück, LCD-Panel;
Einstellungstasten; Ladeanzeige.
Prinzip: LED Curing Light wird nach dem Prinzip der Strahlenbestrahlung angewendet, um das lichtempfindliche Harz zu verfestigen, indem es in kurzer Zeit darauf geschossen wird.
Verwendungszweck: Für die Polymerisation von lichthärtenden Materialien durch Zahnärzte.
Einstellbare Aushärtezeit und drei Aushärtearten sind verfügbar.

Spezifikationen:
Netzteil - Lithium-Ionen-Akku
- Eingang: AC 100 ~ 240V, 50 / 60Hz
- Spannung: DC 3.7V - Ausgang: DC 4.2V
- Kapazität: 2200mAh
- Ladezeit: Etwa 5 Stunden

LED
- Außendurchmesser: Ø8mm
- Fläche: 50mm2
- Wellenlänge: 450 ~ 470nm
- Beleuchtung: 1200-1500mW / cm2
Drei Härtungsmodus:
P1: FAST Mode - immer volle Leistung
P2: RAMP-Modus - allmählich zunehmende Leistung, dann volle Leistung bis zum Ende
P3: PULSE Mode-1 zweites Intervall mit voller Leistung für 1,8 Sekunden

Abmessungen
Haupteinheit (Steuerungsteil): 26 * 40 * 145mm
Ladestation: 60 * 100 * 70mm
Nettogewicht: ca. 320 g

Arbeitsumfeld
Umgebungstemperatur: 5 ℃ ~ + 40 ℃
Relative Luftfeuchtigkeit: 0% ~ 80%
Atmosphärischer Druck: 70KPa ~ 106KPa

Anmerkungen:
Bitte erlauben 1-3 cm abweichung aufgrund der manuellen messung.
Bitte haben Sie Verständnis dafür, dass sich die Bilder leicht vom tatsächlichen Artikel unterscheiden, da jeder Monitor nicht gleich kalibriert ist.

Paket enthalten: 1pc Cure Lampe

English description:
Dental LED Curing Light Wireless Cure Lamp

Features:
Structure and Components:
Light guide;Circular eye-protector;
Power adapter;Charging base;
Hand piece;LCD Panel;
Setting Buttons;Charging Indicator.
Principle:LED
Curing Light is applied to ray radiation principle to solidify the
light-sensitive resin by shooting at it in a short time.
Intended use:Used for polymerization of light cured materials by dental professionals.
Adjustable curing time and three curing modes are available.

Specifications:
Power Adapter - Li-ion Battery
- Input: AC 100~240V, 50/60Hz
- Voltage: DC 3.7V - Output: DC 4.2V
- Capacity: 2200mAh
- Charging Time: About 5 hours

LED
- Outer Diameter: Ø8mm
- Area: 50mm2
- Wavelength: 450~470nm
- Illumination:1200-1500mw/cm2
Three Curing Mode:
P1:FAST Mode–full power all the time
P2: RAMP Mode–gradually increasing power then full power till ends
P3:PULSE Mode–1 second interval with full power for 1.8 second

Dimension
Main Unit (Control Part): 26*40*145mm
Charging Base: 60*100*70mm
Net weight: About 320 g

Working Environment
Ambient temperature: 5℃ ~ +40℃
Relative humidity range: 0% ~ 80%
Atmospheric pressure: 70KPa ~ 106KPa

Notes:
Please allow 1-3cm deviation due to manual measurement.
Please
understand that the pictures might be slightly different from the
actual item because every monitor is not calibrated same.

Package Included:1pc Cure Lamp

1. All our stock is located in China and all shipments will originate here. Your items will be shipped via standard airmail two or three days after payment clears except those custom products.
2. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility.Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.
3. You need to contact your local post office or customs department in the following cases:
Delivery mistake by the post office man
Delayed shipping due to customs detention
Delivery failure caused by wrong address

1. If you receive any damaged or defective items, we will exchange it as quickly as possible.
2. You must contact us within 7 days of delivery of the product to notify us of any defects.
3. You need to send a picture to prove the problems by using ebay's attaching files button.
4. Items must be in original box and kept in good condition.
5. Buyer is responsible for return shipping cost if there isn't any problem with the product. 

If you are satisfied with the item and our total service, your comment is very important in our business success. Please take a minute to leave us a positive feedback with an overall Detailed Selling Rating (DSR) of 5.
Our eBay account setup auto feedback, so eBay system gives you automatically Positive feedback back after your positive feedback left.
If you plan to give us a neutral/negative feedback Or open ebay/paypal case, please write to us immediately so that we can do our best to resolve your problem.

1.Do not hesitate to contact us anytime, we are committed to your 100% customer satisfaction.
2.I am here and ready to assist you with any questions or concerns you might have.
3.My goal is to make sure you are a happy customer and pleasant shopping with us.