Eufy S4 Solar Junction Box

Mounting this Junction Box is quick and easy, requiring only basic tools. Here’s how to do it:

1. Drill out the necessary holes with a 25mm drill bit, and thread the 25mm Male conduit adaptor onto the box (adaptor is not included, but is available from most hardware stores)
2. Attach the Junction Box onto the desired location, and route the cables as required, using PVC conduit to cover the cables. Use sealant on all connection points, to ensure that its waterproof.
3. Plug the power cable into the camera
4. Use the included screws to firmly secure the top cover, and the camera mount into place.
5. Slot your S4 camera into the bracket, and tighten the two side screws.

---

This junction box allows the Eufy S4 Solar's cables to be protected from the elements, significantly increasing durability and aesthetics compared to a standard installation. 

We currently make these Junction Boxes in Black or White.

Our current products for the Eufy S4 Solar:

• Corner Mount
• Rain Cover
• Junction Box

If you would like a custom mount or colour, then feel free to message us.