Baufan pronatur interior white 10 l silicate mineral paint matt interior paint wall paint

Baufan pronatur interior white silicate mineral paint

pronatur interior white is a silicate mineral paint with high water vapor permeability.

white, for indoor use, matt, high coverage, breathable
Solvent- and plasticizer-free, without preservatives

Product classification according to din EN 13 300:
Wet abrasion: Class 3
Contrast ratio: Class 2 with a yield of 6 m²/l
Gloss level: matt
Maximum grain size: fine

Scope of application:
White, matt silicate paint for interior wall and ceiling painting.
For mineral substrates (such as gypsum, lime and cement plaster, masonry and concrete) as well as woodchip wallpaper, plasterboard and gypsum fiber boards and similar substrates.
Due to its microcrystalline structure, the paint has a high water vapor diffusivity and thus supports a pleasant indoor climate.

Substrate pretreatment:
The surface must be dry, clean and stable.
Remove old paint, distempers and loose plaster parts that do not adhere firmly. Firm up sandy and chalky surfaces.

Processing:
pronatur interior white as a primer up to approx. Dilute 10% with water; Use undiluted as a final coat.
If necessary (e.g. on very dark, inconsistent or very absorbent surfaces), apply two coats.
Can be tinted up to max. 2% with universal tinting concentrates.
1. Stir before use.
2. Application with a roller, brush, brush, surface brush or spray device - also possible using the airless process. When airless spraying, attach a sieve bag in front of the suction port if possible.
3. Wash tools immediately after use with clean water, if necessary. clean with the addition of a detergent.

Dry season:
The drying time depends on the processing temperature.
Relative humidity above 90%, especially in conjunction with low temperatures, can significantly influence drying time and quality characteristics.
Under normal conditions (20 °C, 65% relative humidity, moderately absorbent surface), the drying time is approx. 6 - 12 hours.

Processing temperature:
at least + 5 °C for material and circulating air

Safety instructions:
Even when using low-pollutant products, the usual safety measures must be observed.
Keep out of the reach of children.
Due to the high pH value, avoid contact with eyes and skin.
In case of skin or eye contact, immediately rinse thoroughly with water.
Wear protective clothing.
Do not empty into drains.

Consumption:
1 liter is sufficient for approx. 8 square meters for a single coat - depending on the surface condition.

Osh:
Product code M-SK01
EU VOC limit for this product:
(Cat.: A/a, Wb) = 30 g/l (2010)
VOC content of this product max.: 0.5 g/l

Storage:
Store the container tightly closed in a cool, but frost-free place.
Best before: 24 months from the date of manufacture (if unopened and stored properly).

Disposal:
Waste code no. 080120. Only empty containers for recycling.
Material residues can be dried according to waste code number. 170904 (mixed construction and demolition waste) or disposed of as household waste.

Ingredients:
Water, potassium silicate (potassium silicate), marble powder, talc, chalk, titanium dioxide, acrylate dispersion, aluminum silicate.

Delivery form:
1 PE bucket of 10 l each

Safety notice:
Keep out of reach of children.
Always read the label and product information before use. 

Prompt purchases will be combined, please request the total amount before paying (after purchase).

dewabit