LEBYCLE MTB Road Bicycle Hub Bearing Removal Tool Bike Hub Tower Base Removal Tool Removal Puller Bike Hub Bearing Repair Tool
Product Parameters :
Name: Hub Bearing Removal Tool
Material:Stainless Steel Body, Tool Steel Thimble/Pin/Expansion Plugscrew, Aluminum Alloy Press/Handle
Weight: About 1560g
Features:
Special pin clevis for removing damaged hub bearing,Built in thrust ball bearing, smooth pull-out bearing;For hubs with inner diameters of 6,7,8,9,10,12,15,16,17,19,20mm., Freehub bearing,and bearing outer rings withinner diameters from 14 to 39 mm.
Aluminum Inner diameter conversion Sleeve
Keeps tools and hub level Highly accurate Avoids wear and tear
Thrust ball bearing
Built-in thrust ball bearings in the main body
Smooth pulling force Easy extraction of bearing
Disassembly of Bearlng
1. Measure the inside diameter of the hub or Freehub bearing to be pulled;
2. Select the appropriate expansion plug according to the measured bearing bore diameter, Using a 12mm open-end wrench or adjustable wrench, tum the expansion plug counterclockwise to secure it to the main body.
3. Install the bearing removal tool in the order shown. Holding the screw with one hand and using a 4mm Allen wrench with the other hand, turn the internal thimble clockwise until the expansion plug expands.
4. Snap the sleeve into the corresponding position as shown in the figure and slowly rotate the upper handle counterclockwise until the bearing is completely pulled out.
5. Remove the bearing from the tool by turning the internal thimble counterclockwise with a 4mm Allen wrench to fully retract the expansion plug.
Disassembly of bearing outer ring
Pin collets are used when bearings are excessively damaged.Causes the bearing to be used when only the outer race is lefon the hub or Freehub.
1. Replace the thimble with a pin thimble, use a 4mm Allen wrench to turn the thimble out clockwise, and then turn it into the pin thimble counterclockwise.
2. Measure the inner diameter of the outer ring of the bearing and select the appropriate pin chuck and pin.
3. Screw in the pin clevis counterclockwise and insert the threepins inlo the corresponding holes as shown.
4. After installing the pins, insert the tool into the outer race ofthe bearing and make sure the pins are aligned with therecesses on the inside of the bearing. Use a 4mm Allen wrench to turn the internal pin thumbscrew clockwise so that the pin catches in the groove on the inside of the bearing outer ring.
5.Slowly tum the upper handle counterclockwise until the bearing outer ring is completely removed.
Disassemhly Freehub
1.Mcasure the inside diareler of the frechub bcaring that needs to be pulled out;
2.Select the appropriate expansion plug according to the measured bearing bore diameter,Use a 12mm open-end wrench or an adjustable wrench, turn the expansion plug counterclockwise to fix it to the main body.
3.Install the bearing removal tool in the order shown.llold the screw fimly with one hand and Using a 4mm Allen wench,turn the internal thimble clockwise until the expansion pluig expands.
4.Snap the body into the corresponding position as shown in the fgure and slowly rotate the upper handle counterelockwise.the until the bearing is completely pulled out.
5, Use a 4mm Allen wrench to turn the internal thimble counterclockwise to fully contract the expansion plug Remove the bearing from the tool.
