2.5mm Drill Bit Straight Shank 118° 4341 HSS Black and Gold Finish - 5 Pack
√FEATURE:
The drill bit is made of 4341 high-speed steel material, it has high hardness and wear resistance, suitable for processing medium hardness materials
Black and gold finish can further enhance the drill bit's wear and corrosion resistance, thereby extending its service life.
The 118° point tip angle is the traditional standard angle, enabling quick penetration into materials and broad applicability.
√APPLICATION:
The 4341 hss drills are suitable for light-duty machining; applicable to low-carbon steel, aluminum alloy, brass, cast iron, medium-carbon steel, stainless steel, acrylic, plastic, wood, etc. For machining thicker metals, low RPM + flood coolantare required.
√PACKING LIST:
-Cutting Edge Diameter: 2.5mm
-Shank Diameter: 2.5mm
-Flute Length: 25mm/0.98 inch
-Total Length: 56mm/2.2 inch
-Package Content: 5pcs x Drill Bit
√NOTE:
When machining different materials, the spindle speed and feed rate vary.
Generally, the harder the material, the lower the spindle speed and feed rate need to be.
Position the twist drill at 90° to the workpiece.
For thick materials, drill in multiple passes to prevent overheating or breakage.
For large holes, start with a guide hole.
Use coolant to improve efficiency, extend tool life, and reduce material damage.
For specific speed and feed rates recommended for common materials, please refer to the details provided on the product page.
The drill bit is made of 4341 high-speed steel material, it has high hardness and wear resistance, suitable for processing medium hardness materials
Black and gold finish can further enhance the drill bit's wear and corrosion resistance, thereby extending its service life.
The 118° point tip angle is the traditional standard angle, enabling quick penetration into materials and broad applicability.
√APPLICATION:
The 4341 hss drills are suitable for light-duty machining; applicable to low-carbon steel, aluminum alloy, brass, cast iron, medium-carbon steel, stainless steel, acrylic, plastic, wood, etc. For machining thicker metals, low RPM + flood coolantare required.
√PACKING LIST:
-Cutting Edge Diameter: 2.5mm
-Shank Diameter: 2.5mm
-Flute Length: 25mm/0.98 inch
-Total Length: 56mm/2.2 inch
-Package Content: 5pcs x Drill Bit
√NOTE:
When machining different materials, the spindle speed and feed rate vary.
Generally, the harder the material, the lower the spindle speed and feed rate need to be.
Position the twist drill at 90° to the workpiece.
For thick materials, drill in multiple passes to prevent overheating or breakage.
For large holes, start with a guide hole.
Use coolant to improve efficiency, extend tool life, and reduce material damage.
For specific speed and feed rates recommended for common materials, please refer to the details provided on the product page.
Hot Item
- 1.We accept eBay payment .
- 2.Payment must be received within 7 business days of auction closing.
- 1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
- 2.Items will be shipped within 1-3 business day when we received payment.
- 3.Delivery time depends on destination and other factors.
2.5mm Drill Bit Straight Shank 118° 4341 HSS Black and Gold Finish - 5 Pack
√FEATURE:
The drill bit is made of 4341 high-speed steel material, it has high hardness and wear resistance, suitable for processing medium hardness materials
Black and gold finish can further enhance the drill bit's wear and corrosion resistance, thereby extending its service life.
The 118° point tip angle is the traditional standard angle, enabling quick penetration into materials and broad applicability.
√APPLICATION:
The 4341 hss drills are suitable for light-duty machining; applicable to low-carbon steel, aluminum alloy, brass, cast iron, medium-carbon steel, stainless steel, acrylic, plastic, wood, etc. For machining thicker metals, low RPM + flood coolantare required.
√PACKING LIST:
-Cutting Edge Diameter: 2.5mm
-Shank Diameter: 2.5mm
-Flute Length: 25mm/0.98 inch
-Total Length: 56mm/2.2 inch
-Package Content: 5pcs x Drill Bit
√NOTE:
When machining different materials, the spindle speed and feed rate vary.
Generally, the harder the material, the lower the spindle speed and feed rate need to be.
Position the twist drill at 90° to the workpiece.
For thick materials, drill in multiple passes to prevent overheating or breakage.
For large holes, start with a guide hole.
Use coolant to improve efficiency, extend tool life, and reduce material damage.
For specific speed and feed rates recommended for common materials, please refer to the details provided on the product page.
The drill bit is made of 4341 high-speed steel material, it has high hardness and wear resistance, suitable for processing medium hardness materials
Black and gold finish can further enhance the drill bit's wear and corrosion resistance, thereby extending its service life.
The 118° point tip angle is the traditional standard angle, enabling quick penetration into materials and broad applicability.
√APPLICATION:
The 4341 hss drills are suitable for light-duty machining; applicable to low-carbon steel, aluminum alloy, brass, cast iron, medium-carbon steel, stainless steel, acrylic, plastic, wood, etc. For machining thicker metals, low RPM + flood coolantare required.
√PACKING LIST:
-Cutting Edge Diameter: 2.5mm
-Shank Diameter: 2.5mm
-Flute Length: 25mm/0.98 inch
-Total Length: 56mm/2.2 inch
-Package Content: 5pcs x Drill Bit
√NOTE:
When machining different materials, the spindle speed and feed rate vary.
Generally, the harder the material, the lower the spindle speed and feed rate need to be.
Position the twist drill at 90° to the workpiece.
For thick materials, drill in multiple passes to prevent overheating or breakage.
For large holes, start with a guide hole.
Use coolant to improve efficiency, extend tool life, and reduce material damage.
For specific speed and feed rates recommended for common materials, please refer to the details provided on the product page.
Hot Item
- 1.We accept eBay payment .
- 2.Payment must be received within 7 business days of auction closing.
- 1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
- 2.Items will be shipped within 1-3 business day when we received payment.
- 3.Delivery time depends on destination and other factors.