⚡ MOS FET Trigger Switch Driver Module • PWM Regulating Electronic Switch • 5-36V 15A

🔧 Dual MOS Transistor Parallel Output • 0-20kHz PWM Support • Up to 400W • Motor/LED/Water Pump Control

⚡ 1-5 Modules
Value multi-pack
bulk quantity, project ready
💪 15A / 400W
High power handling
strong output, heavy duty
📡 PWM Support
0-20kHz frequency
speed control, dimming
🔌 Wide Voltage
DC 5V-36V input
versatile power, flexible

High power MOS field effect tube trigger switch driver module - PWM regulating electronic switch panel. Adopts large power dual-MOS transistor parallel active output, lower resistance, higher current and strong power. Perfect support PWM signal: the PWM controller can access PWM signal, which can perfectly support frequencies of 0-20kHz. This motor control module can tolerate wide input voltage (DC 5-36V) and can be applied in various high power equipment. Applications include motors, lamp bulbs, LED lamp strips, mini water pumps and more. - MOSFET driver, PWM switch, electronic relay

📊 TECHNICAL SPECIFICATIONS

Parameter Specification
Operating Voltage DC 5V-36V - wide voltage range, flexible power
Trigger Signal Source Digital high/low level (DC 3.3-20V) - MCU compatible, logic level
PWM Support 0-20KHz - speed control, dimming capability
Output Power Room temp: 15A / 400W - high power handling
Max Current (cooled) 30A - peak current, heatsink required
Operating Temperature -40°C to +85°C - wide temperature range
Dimensions 3.4 x 1.7 x 1.2 cm - compact module, small footprint
Material PCB - circuit board, durable
Colour Blue - blue PCB, easy to see

✨ KEY FEATURES

  • Dual MOS transistor parallel output - lower resistance, higher current
  • Perfect PWM signal support (0-20kHz) - smooth speed/dimming control
  • Wide voltage input DC 5V-36V - versatile application compatibility
  • High current capability up to 30A - strong power output
  • Compatible with MCU IO ports - Arduino, Raspberry Pi, STM32
  • PLC interface compatible - industrial control ready

🎯 APPLICATIONS

  • Motor Speed Control - DC motor regulation
  • LED Lamp Dimming - brightness control
  • Lamp Bulb Switching - light control
  • LED Strip Control - RGB lighting, decorative
  • Mini Water Pump Control - aquarium, garden
  • High Power Equipment - industrial applications

🔌 COMPATIBLE WITH

📱 Arduino
IO port direct
PWM pins, digital output
🍓 Raspberry Pi
GPIO control
3.3V logic, compatible
🔧 STM32
Microcontroller
embedded systems
🏭 PLC
Industrial control
factory automation
⚡ DC Power
5-36V supply
direct connection

⚡ PERFORMANCE CHARACTERISTICS

  • Dual MOS Parallel - Lower on-resistance, higher efficiency - reduced heat, better performance
  • 400W Power Rating - Handles heavy loads - high power, robust
  • 30A Peak Current - With auxiliary cooling - heatsink recommended for max
  • Low Resistance Output - Minimal power loss - efficient switching

👥 PERFECT FOR THESE USERS

  • Arduino & Raspberry Pi Makers - DIY electronics projects
  • Industrial Control Engineers - PLC automation systems
  • Robotics Enthusiasts - motor control, robot drivers
  • Home Automation Hobbyists - smart lighting, controls
  • Students & Educators - electronics learning, labs
  • Product Developers - prototyping, testing

📡 TRIGGER SIGNAL GUIDE

🔘 High/Low Level
DC 3.3-20V
digital on/off control
🔄 PWM Signal
0-20KHz
speed/dimming control
🔌 MCU IO
Direct connection
no extra components needed
🏭 PLC Interface
Industrial standard
factory automation ready

🔧 WIRING & USAGE

  • Connect load to output terminals - motor, LED, lamp
  • Connect power supply (5-36V DC) - observe polarity
  • Connect trigger signal to input - PWM or digital IO
  • Add heatsink for >15A continuous - thermal management
  • Use proper gauge wire for high current - safety first

⚠️ IMPORTANT NOTES

  • Maximum 15A continuous at room temperature - observe current limits
  • Use auxiliary cooling for 30A peak - fan or heatsink required
  • Signal voltage 3.3-20V DC only - check compatibility
  • Do not exceed 36V input - risk of damage
  • Observe correct polarity on power input - reverse polarity protection?

📦 WHAT'S INCLUDED

⚡
1 x Modules
MOS FET Driver
trigger switch modules
📦
Compact Size
3.4 x 1.7 x 1.2cm
small footprint
🔌
Ready to Use
No assembly required
plug and play

🛒 ADD TO CART → CONTROL HIGH POWER DEVICES WITH EASE!

"Perfect for my Arduino robot project - drives motors smoothly with PWM and handles 12V easily. Great value 1-5 pack!" ★★★★★ - satisfied customer, robotics enthusiast

📞 Support: eBay Messages | 🔄 30-Day Returns | 🚚 Fast UK Dispatch - trusted seller, electronics specialist

Note: 5-36V DC input • 0-20KHz PWM support • 15A continuous / 30A peak with cooling • Compatible with 3.3-20V trigger signals - complete specifications