Titebond 5175 Cold Press Veneer 32oz Bottle
Titebond Cold Press for Veneer is a high-quality, economical alternative to contact cement for large-scale bonding of veneers to flat surfaces. It is specifically formulated for cold press laminating of wood to solid woods, particleboard, MDF, plywood and other porous materials. Titebond Cold Press offers a modWood Glueerate speed of set, a translucent glue line and contains none of the harmful or corrosive fumes typical of most contact cements. It also prevents bleed-through on open-grained and unbacked wood veneers.
Features & Benefits
Economical alternative to contact cemenr
Moderate speed of set
Safe, non-flammable
Formulated to minimise "bleed-through"
No harmful vapours
Physical Properties
Type : Modified PVA emulsion
Calculated Voc : 2.0 g/L
State : Liquid
Weight Per Gallon : 9.2 lbs.
Color : Tan
Dried Film : Dark Brown
Flashpoint : > 200°F
Solids : 0.42
Freeze/Thaw Stability : Stable
Viscosity : 4,500 cps
Ph : 4.9
Chalk Temperature : To assure a good bond, 50°F is the lowest recommended temperature of the glue, air and materials during application.
Storage Life : 12 months in tightly closed containers at 70°F
Application Guidelines
Application Temperature : Above 50°F
Open Assembly Time : 15 minutes (70°F./50% RH)
Total Assembly Time : 15-20 minutes (70°F./50%RH)
Minimum Required Spread : Approximately 6 mils or 250 square feet per gallon
Required Pressure Application : 100-250 psi, depending on substrates
Method Of Application : For most consistent coverage a mechanical spreader is recommended.
Cleanup : Damp cloth while glue is wet. Scrape off and sand dried excess.
Limitations
Titebond Cold Press for Veneer is specifically designed for veneering and is not suited for other types of assembly applications. Not recommended for exterior use or where moisture is likely. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. NOTE STIR PRODUCT BEFORE USE TO ENSURE UNIFORMITY. KEEP FROM FREEZING.
Titebond 5175 Cold Press Veneer 32oz Bottle
Titebond Cold Press for Veneer is a high-quality, economical alternative to contact cement for large-scale bonding of veneers to flat surfaces. It is specifically formulated for cold press laminating of wood to solid woods, particleboard, MDF, plywood and other porous materials. Titebond Cold Press offers a modWood Glueerate speed of set, a translucent glue line and contains none of the harmful or corrosive fumes typical of most contact cements. It also prevents bleed-through on open-grained and unbacked wood veneers.
Features Benefits
Economical alternative to contact cemenr
Moderate speed of set
Safe, non-flammable
Formulated to minimise "bleed-through"
No harmful vapours
Physical Properties
Type : Modified PVA emulsion
Calculated
The delivery charge for each item is shown in the item description and the charge is for delivery to mainland UK only.
For items over £30 being delivered to the following postcodes:
Scottish Highlands - AB36-38, AB55-56, FK17-21, IV1-39, IV52-54, IV63, KW1-14, PA21-40, PH19-26, PH30-41, PH49-50
Scottish Islands - HS1-9, IV40-51, IV55-56, KA27-28, KW15-17, PA20, PA41-49, PA60-78, PH42-44, ZE1-3
Offshore Islands, Highlands, Ireland and Isle Of Man Please contact us before purchase as your order may incur delivery charges of £20. If you do not wish to pay the £20 we will have to cancel and refund the order.
Delivery is normally within 2-5 working days for items paid by Paypal or Credit card, Unless item is advertised as express delivery.
Items paid for by cheque or by Echeque will be dispatched as soon as payment clears.
Please note items marked as express delivery will be sent via a courier and will have to be signed for upon delivery.
If you have incorrectly purchased an item from us or have
received it and decided that it is no longer wanted or needed it must be
returned within 60 Days in its original packaging & Unused, The buyer of
the item is responsible for the cost of returning the good to ourselves. A
refund will be issued once the goods have been inspected and tested if
necessary.
Any faulty or damaged items can also be returned within the
warranty period at the buyers cost. Goods will be either replaced or repaired.
To arrange a return please contact us via the 'Ask seller a
question' link on the item listing.
To see our full returns policies please see the returns section
in our eBay shop.
Please Note - All spare parts are brand new however they are NOT covered by any guarantee once they have been fitted to the machine.
Please send all questions via the 'Ask a Question' link on the item listing, or our full contact details can be found in the Business Seller Information just below this box.