OX CNC Mechanical Kit
This CNC Router kit includes everything needed to complete the mechanical portion of the OX CNC Machine,
this includes four NEMA23 (175oz*in / 345oz*in) Stepper Motors and GT3 Pulley's/Belt.
Materials you can Mill/Cut/Carve & Engrave:
- Aluminum
- Hard Wood
- Soft Wood
- Oak
- Plexi Glass
- Delrin
- HDPE
- Foam
- NEMA 23
- Shaft Size: 1/4"
- Step Angle: 1.8
- Holding Turque: 1.26N.m
- Rated voltage: 3.36V
- Rated current: 2.8A
Specs of Nema23 (2.45N.m) Stepper Motor:
- NEMA 23 (High Torque)
- Shaft Size: 1/4"
- Step Angle: 1.8
- Holding Turque: 2.45N.m
- Rated voltage: 3.6V
- Rated current: 3A
Package Includes:
- OX CNC Mechanical Kit
- 1.26N.m / 2.45N.m Nema23 Stepper Motors / NO Motors
- Extrusions are new and M5 tapped as where it is necessary!
- PDF Assembly Manual is available by email.
PLEASE NOTE:
Part List:
* Any Mains power connections must be installed by a Licensed electrician or suitability qualified person!
Z Travel Explained:
To clarify the Z Travel distance, this is not the max cutting depth. Z travel is the distance downwards it can travel before hitting the spoiler board supports.
This kit has a Z travel of 69mm, if you had a 12mm spoiler board, this will reduce the Z travel to 57mm.
In this case 57mm is maximum thickness of material that will fit on the machine.
To calculate the max cutting depth for a chosen piece of material it is:
Max Cutting Depth = Z travel – Material Thickness
For instance a setup with a 12mm spoiler board, the max Z travel is 57mm, if we wanted to cut into a material 30mm thick the max cutting depth would be:
Max Cutting Depth = 57 – 30 = 27mm
This means with a 30mm piece of material we would not be able to cut the whole way through.
The max thickness that can be cut the whole way through is half the Z travel. So with a Z travel of 57mm, we could cut the whole way through a piece of material 28.5mm thick.
This kit has a Z travel of 69mm, if you had a 12mm spoiler board, this will reduce the Z travel to 57mm.
In this case 57mm is maximum thickness of material that will fit on the machine.
To calculate the max cutting depth for a chosen piece of material it is:
Max Cutting Depth = Z travel – Material Thickness
For instance a setup with a 12mm spoiler board, the max Z travel is 57mm, if we wanted to cut into a material 30mm thick the max cutting depth would be:
Max Cutting Depth = 57 – 30 = 27mm
This means with a 30mm piece of material we would not be able to cut the whole way through.
The max thickness that can be cut the whole way through is half the Z travel. So with a Z travel of 57mm, we could cut the whole way through a piece of material 28.5mm thick.
Display:
