M10 Motor Shaft Drill Spindle Saw Blade Chuck Adapter Connecting Rod Sleeve
When installing the shaft sleeve on a table grinder, it can be sanded, polished, or polished with a 16MM or 20MM aperture saw blade, polishing blade, or grinding blade.
Inner diameter hole: 5mm/6mm/8mm/10mm/12mm
We have two types of M10 threads: Right hand thread and Left hand thread . Please be sure to choose according to your personal needs (the specification of Left hand thread has been specified)
Description of Right hand thread and Left hand thread :
Right hand thread means to tighten clockwise and loosen counterclockwise. The general habit is to use positive filaments.
Left hand thread means to tighten in reverse direction and loosen in clockwise direction. When using both ends of the shaft, use a reverse wire fit at one end. Please choose according to your personal needs.
The tightening nuts used for Right hand thread and Left hand thread are different, and they are also divided into Right hand thread and Left hand thread. Nuts with Right hand thread and Left hand thread are not common!
※ Please note: We specialise in the production of various hardware accessories, hardware tools and mechanical transmission system components. If you have any other needs, please contact me and we will solve your problem promptly!
▲ Tips:
◆ All pictures are professionally colour-coded, but due to the different ambient light and display device settings, there may be some discrepancies between the displayed pictures and the items themselves. Please understand this.
◆ The data is measured manually. There may be deviations, but this has no effect on use.
