• Fitment:
  • 2003-2010 Can-Am/Bombardier Outlander 330
  • 2003-2014 Can-Am/Bombardier Outlander 400
  • 2007-2014 Can-Am/Bombardier Outlander 500
  • 2006-2014 Can-Am/Bombardier Outlander 650
  • 2006-2014 Can-Am/Bombardier Outlander 800
  • 2011-2014 Can-Am/Bombardier Commander 800
  • 2011-2014 Can-Am/Bombardier Commander 1000
  • 2007-2014 Can-Am/Bombardier Renegade 500
  • 2007-2014 Can-Am/Bombardier Renegade 800
  • 2013-2014 Can-Am/Bombardier Maverick 1000
  • 1988-2002 Kawasaki 220 Bayou Rear Only
  • 2003-2012 Kawasaki 250 Bayou Rear Only
  • 1985-2005 Kawasaki 300 Bayou 300 2WD
  • 1989-2005 Kawasaki Bayou 300 4WD
  • 1999-2005 Kawasaki Prairie 300
  • Wheel Spacers 10x1.25 For Kawasaki Prairie Can-Am Outlander 4/137 4Pc 1.5" 4x137

    Fitment:

    2003-2010 Can-Am/Bombardier Outlander 330

    2003-2014 Can-Am/Bombardier Outlander 400

    2007-2014 Can-Am/Bombardier Outlander 500

    2006-2014 Can-Am/Bombardier Outlander 650

    2006-2014 Can-Am/Bombardier Outlander 800

    2011-2014 Can-Am/Bombardier Commander 800

    2011-2014 Can-Am/Bombardier Commander 1000

    2007-2014 Can-Am/Bombardier Renegade 500

    2007-2014 Can-Am/Bombardier Renegade 800

    2013-2014 Can-Am/Bombardier Maverick 1000

    1988-2002 Kawasaki 220 Bayou Rear Only

    2003-2012 Kawasaki 250 Bayou Rear Only

    1985-2005 Kawasaki 300 Bayou 300 2WD

    1989-2005 Kawasaki Bayou 300 4WD

    1999-2005 Kawasaki Prairie 300

    2003-2012 Kawasaki Prairie 360

    1997-2005 Kawasaki Prairie 400

    1993-2005 Kawasaki KLF 400 Bayou 4WD

    2002-2006 Kawasaki Prairie 650 4WD

    2002-2006 Kawasaki Prairie 700 4WD

    2003-2012 Kawasaki Brute Force 650 4WD

    All Kawasaki Mule 500

    All Kawasaki Mule 600

    2004-2006 Suzuki Twin Peaks 700 4WD

     

    Position:
    Front+Rear+Left+Right
     

    Package Included:
    4x Wheel Spacers

     

    How to install your Wheel Spacers:

    • Installing spacers is a relatively easy job and can be performed with basic tools and a jack. With your car still on the floor slightly lossen your wheel bolts or nuts to prevent the wheel spinning, a breaker bar may be necessary if they are tight. Once loose the car can be jacked up and the nuts can be removed. Take off the wheel and place to one side.
    • On an older car you may have developed some corrosion on the brake disc surface. This needs to be nice and clean to mount the spacer so use a wire brush to remove any debris prior to fitting the spacer.
    • With the surface clean, place the spacer into position and use the nuts supplied with the spacers to secure the spacer to the car. Evenly tighten the nuts in a star formation before torqueing to the manufacturers specification. You may need someone to press the brakes for you while you do this.
    • With the spacer installed you can now re-fit the wheel. Use the same technique to tighten the wheel nuts as you did with the spacer. Finally, torque the wheels nuts to the manufacturers specifications and lower the car to the ground. Repeat this process on the other axle or all corners, depending on whether you have purchased a pair or a set.

     

    How do you determine if you need wheel spacers?

    Determine if you need wheel spacers by checking for clearance issues—such as tires rubbing on suspension components or wheels touching brake calipers—or if you desire a more flush, aggressive "stance" where the tires align with the fender edge. Measure the gap using a straight edge on the fender to the tire and calculate the required thickness. 


    Item Specifics
    Brand hilamps
    Manufacturer Part Number 13633884
    Manufacturer Warranty 1 Year
    Material Aluminum
    Type Wheel Spacer
    Color Silver
    Vehivle Bolt Pattern 4x137
    Wheel Bolt Pattern 4x137
    Hub Bore 110mm
    Thread Size 10x1.25
    Thickness 1.5"
    Huncentric Yes
    Quantity 4
    Torqued Down By Hand At 45-55 FT/LBS
    Bolt Shank Length 33mm
    Surface Finish CNC Machined Polished Aluminum Finish
    Stud Grade 10.9
    Placement on Vehicle Front Rear Left Right
    Place of delivery Ontario,California
    Bolt Pattern 4/137mm
    Lug Patterns 4 Lug
    Universal Fitment No
    Performance Part Yes
    Interchange Part Number Can-Am/Bombardier Kawasaki 4/137 ATV with 10x1.25 studs
    Other Part Number Some ATVs requires different bolt pattern front and rear.
    Superseded Part Number 4x137 wheel spacers 1.5 inch thick with 10x1.25 studs
    Note Make sure your bolts are 10x1.25
    Country of Origin China

    Payment
    1.We accept any payment which can be accepted by eBay.
     
    2.Please do check the shipping address. If you want to change the shipping address, please contact us by eBay messages.
     
    3.If you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.
     
    4.Payment must be received within 10 days as auction ended or order might be delayed.
    Shipping
    1. Orders processed within 24 hours of payment verification. (if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
     
    2. The images shown are not the actual item and are for your reference only.
     
    3. Fast shipping: All our packages use USPS First Class/UPS/Fedex... Package Service
     
    4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
    Returns
    1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
     
    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
     
    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
     
    4. Return shipping is to be paid by the Buyer.
    Feedback
    1. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
     
    2. It is impossible to address issues if we do not know about them!

    Delivery
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    Wheel Spacers 10x1.25 For Kawasaki Prairie Can-Am Outlander 4/137 4Pc 1.5" 4x137

    Fitment:

    2003-2010 Can-Am/Bombardier Outlander 330

    2003-2014 Can-Am/Bombardier Outlander 400

    2007-2014 Can-Am/Bombardier Outlander 500

    2006-2014 Can-Am/Bombardier Outlander 650

    2006-2014 Can-Am/Bombardier Outlander 800

    2011-2014 Can-Am/Bombardier Commander 800

    2011-2014 Can-Am/Bombardier Commander 1000

    2007-2014 Can-Am/Bombardier Renegade 500

    2007-2014 Can-Am/Bombardier Renegade 800

    2013-2014 Can-Am/Bombardier Maverick 1000

    1988-2002 Kawasaki 220 Bayou Rear Only

    2003-2012 Kawasaki 250 Bayou Rear Only

    1985-2005 Kawasaki 300 Bayou 300 2WD

    1989-2005 Kawasaki Bayou 300 4WD

    1999-2005 Kawasaki Prairie 300

    2003-2012 Kawasaki Prairie 360

    1997-2005 Kawasaki Prairie 400

    1993-2005 Kawasaki KLF 400 Bayou 4WD

    2002-2006 Kawasaki Prairie 650 4WD

    2002-2006 Kawasaki Prairie 700 4WD

    2003-2012 Kawasaki Brute Force 650 4WD

    All Kawasaki Mule 500

    All Kawasaki Mule 600

    2004-2006 Suzuki Twin Peaks 700 4WD

     

    Position:
    Front+Rear+Left+Right
     

    Package Included:
    4x Wheel Spacers

     

    How to install your Wheel Spacers:

    • Installing spacers is a relatively easy job and can be performed with basic tools and a jack. With your car still on the floor slightly lossen your wheel bolts or nuts to prevent the wheel spinning, a breaker bar may be necessary if they are tight. Once loose the car can be jacked up and the nuts can be removed. Take off the wheel and place to one side.
    • On an older car you may have developed some corrosion on the brake disc surface. This needs to be nice and clean to mount the spacer so use a wire brush to remove any debris prior to fitting the spacer.
    • With the surface clean, place the spacer into position and use the nuts supplied with the spacers to secure the spacer to the car. Evenly tighten the nuts in a star formation before torqueing to the manufacturers specification. You may need someone to press the brakes for you while you do this.
    • With the spacer installed you can now re-fit the wheel. Use the same technique to tighten the wheel nuts as you did with the spacer. Finally, torque the wheels nuts to the manufacturers specifications and lower the car to the ground. Repeat this process on the other axle or all corners, depending on whether you have purchased a pair or a set.

     

    How do you determine if you need wheel spacers?

    Determine if you need wheel spacers by checking for clearance issues—such as tires rubbing on suspension components or wheels touching brake calipers—or if you desire a more flush, aggressive "stance" where the tires align with the fender edge. Measure the gap using a straight edge on the fender to the tire and calculate the required thickness. 



    1.We accept any payment which can be accepted by eBay.
     
    2.Please do check the shipping address. If you want to change the shipping address, please contact us by eBay messages.
     
    3.If you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.
     
    4.Payment must be received within 10 days as auction ended or order might be delayed.
    1. Orders processed within 24 hours of payment verification. (if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
     
    2. The images shown are not the actual item and are for your reference only.
     
    3. Fast shipping: All our packages use USPS First Class/UPS/Fedex... Package Service
     
    4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
    1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
     
    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
     
    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
     
    4. Return shipping is to be paid by the Buyer.
    1. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
     
    2. It is impossible to address issues if we do not know about them!

    hilamps_All rights reserved.