10Pcs Stainless Steel Bathroom Hardware Set, Anti-Rust Complete Towel Bar Accessories Kit

✨ Product Introduction

🔧 Installation Preparation Tools

• Electric drill with 6mm drill bit
• Pencil or marking pen
• Hammer
• Phillips screwdriver
• Level (optional for accurate installation)

📝 Step-by-Step Installation Guide

1. Mark Mounting Position

    

   Place the hardware on the ideal wall position and mark the mounting holes with a pencil. Use a level to keep horizontal and vertical alignment for a neat look.
    
2. Drill Reserved Holes

    

   Drill holes at marked spots with a 6mm drill bit, keep drilling depth at 3–4cm for stable mounting.
    
3. Install Expansion Plugs

    

   Insert plastic expansion plugs into holes, then tap gently with a hammer until flush with the wall surface.
    
4. Detach Mounting Base

    

   Loosen the bottom screws to separate the mounting base from the main hardware body.
    
5. Fix the Base Firmly

    

   Align the base with expansion plugs, fasten the matching screws tightly to fix the base on the wall.
    
6. Install Main Unit

    

   Fit the main hardware onto the fixed base, tighten the bottom locking screws, ensure it is stable and wobble-free.
    

⚠️ Safety & Installation Precautions

• Recommended for concrete, tile and solid wood walls; not suitable for hollow drywall.
• Wear safety goggles while drilling to avoid injury from dust and debris.
• Do not over-tighten screws to prevent wall damage or product deformation.
• Test load-bearing capacity before hanging heavy towels and daily items.

🧼 Daily Maintenance Tips

• Wipe regularly with soft dry cloth to remove water stains and keep bright finish.
• Do not use abrasive cleaners or steel wool to avoid scratching the stainless steel surface.
• Check screw tightness and mounting stability every 3–6 months for long service life.