Orthodontic Adhesive Light Cure Blue Glue Kit
Feature:
This orthodontic adhesive provides a longer working time and a rapid setting time. Can be placed directly into bands. Excess flash is easy to clean up prior to the light curing and the cement is easy to see due to the blue color.
It contains fluoride to reduce the chance of declacification.
Packing list:
1 x Etchant acid Gel 2.5ml syringe;
1 xLight Cure Adhesive Paste 5g syringe;
1 x Syringe tip
Box size: 17*11*2.5cm
STORAGE: Store at 25℃ or less in a cool and dry place and avoid direct sun exposure. Recap the syringe after use.
Orthodontic Bonding Paste Light Cure Adhesive Green Glue
Description:
Reasons for choosing green glue:
1. Green Glue is the two-way color change adhesive for brackets that provides the strength flexibility and intelligent features you demand.
2. Quick-cure polymerization ensure more reliable bond strength 185% more working time than other light cure adhesives allow for better placement.
3. The formula of green glue can improve the impact resistance by 118%, effectively reducing the accidental fall of brackets.
4.Two color change:
Heating (Green)----Clear ---Get Cool( Green ), Green---Clear---Green
It is green when the temperature is low, allowing you to clearly identify the excess or residual green glue during the bonding and removal of brackets, so that it can be quickly and accurately removed without damaging the enamel layer. However, after light curing, the color of the green glue will change from green to transparent at normal temperature in the mouth, maintaining a beautiful effect.
Packing List:
1x Adhesive paste Syringe (4g)
1 x Primer Bottle (3ml)
1 X 37%Gel Etchant (2.5ml)
Other accessor
Orthodontic Adhesive
Specifications
1. This product is one kind of orthodontic direct bonding system resin with
aromatic bis dimethyl acrylate resin as its main material.
2. As a new-type orthodontic direct bonding system, it is convenient to use
with little waste, easy to handle independently and has a favorable clinical
bonding strength.
3. It consists of primer and paste with acid etchant, spatulas and small
brusher as its accessories.
Preparation: Clean
tooth enamel surface,eliminate tooth contamination,rinse then isolate tooth and
blow-dry.
Etching:Etching the enamel of the tooth with acid etchant for 50 or 60 sec.
Rinse and dry with clean air. If the enamel does not have a chalky appearance,
pls. repeat the process;
Brushing: apply a thin layer of the primer over the etched enamel with the
brusher;
Bonding: apply another thin layer of the paste to seal the edges, adjust the
bracket within 20 sec, give pressure for 5 to 10 secand remove the excessive
primer and paste after 40 to 60 sec; then do orthodontic procedures followed
5-min curing.
Packaging Detail:
3 x black syringes (3.5g)
1 x primer bottle (10ml)
35 x Brushes
Orthodontic Bonding Bracket Light Cure Adhesive
Dental bonding Bracket Light cure adhesive
Description:
Warning: Primer and adhesive contains acrylate monomers. Acrylate monomers are known to produce allergic skin reactions in certain sensitive individuals. May cause eye and skin irritation.
Precautions: Avoid eye and skin contact. Wear gloves when handling this material.
Precaution:Please follow manufacturer's directions on the handling, proper use and recommendations for eye protection, when using a curing light
This system is designed to be used at room temperature (20-25°C, 68-77°F)。Storage between 2-27°C/35-80°F Light Sensitive
Contents:
3 x Adhesive paste Syringes (Total 10.5g)
1 x Primer Bottle (8ml)
40 x Brushes
1 x Instruction Booklet
Other accessories
Light Cure Orthodontic Adhesive Kit Clear / Blue
Indication for use:
Bonding for metal and ceramic bracket.
Advantages:
1. Light cure feature enable extensive working time for bracket placement and adjustment.
2. Immediate bonding strength can be achieved after light cure. Archwire can be tied up right following the cure.
3. Proper bonding strength.Bonding to enamel is around 20Mpa to ensure no bracket breaking off from tooth during long period of treatment.Strong and reliable bonding strength.
4. Excellent handling.
Package:
Light Cure Adhesive Paste 4g/Syring
Light Cure Adhesive Primer 3ml/Bottle
37% Phosphoric Acid Etchant 2.5ml/Syringe
Little brush 20 pcs
Syringe tip: 5 pcs

