Manual Pipe Bender (3/8" - 1") (W-25S)

Powder Coating System Manual Electrostatic Powder Coating Machine Paint Sprayers

Descriptions:

Introduction:
It is an ideal spray tool for spraying various metal parts to make the workpiece beautiful and durable. It can be sprayed for any metal parts. The sprayed surface after forming can prevent corrosion of a variety of chemical substances and ultraviolet radiation. It is much stronger than liquid spray and more than ten times stronger than ordinary paint. In the production process, there is no need to add any organic solvents, no toxic volatiles are produced, and no environmental pollution is caused.
No special training is required to use this product. As long as you read the manual carefully, you can fully master it in a short period of time and operate it proficiently to realize your ideas and obtain the ideal decorative parts with plastic spraying

Specification:
Power requirements: Use a 220V AC power supply with safety grounding. When in use, the machine must be grounded.
Air source requirements: The compressed air pressure used must be 0.5 to 1.2 kg. It is recommended to use 1.0 kg, when the air pressure is the most ideal.
Environmental requirements: well ventilated and dry.
Power volatge: 230VAC 50Hz
Operating pressure:0.7-1bar
Air inlet: 1/4”
Container capacity: 500G
Packing size: 41×30×28cm/16x12x11inch
Gross/net weight: 2.5/ 1.8kg
This machine don't have gear adjustable.
The machine must be equipped with an Air compressor and an oven（not included in the package）!
 
Preparation before use:
1) Preparation of sprayed parts: the surface of the sprayed parts should be rust-removed, degreasing, and phosphated. The parts should have a dry, smooth and clean surface.
2) Prepare an oven so that the sprayed parts can be put into the oven for baking. The sprayed parts are best hung in the oven with metal spreaders.
3) Prepare a power supply and socket with the same voltage as the injection molding machine. The power supply must have a safety ground.
4) Prepare the gas source. The air source pressure is generally 0.5 kg to 1.2 kg, and 1.0 kg air source pressure is recommended.
5) Put the dry plastic powder into the bottle, and the amount of plastic powder is about 5 cm from the bottom of the bottle.
 
Caution:
Because this machine generates high-voltage static electricity, the user's work place and equipment must be dry when using it. In addition, the machine must be safely grounded. Do not unplug the grounding plug. This is important for protecting the machine and preventing electric shock. To avoid danger, after each use, the discharge needle must be touched to the ground clamp to discharge.
When the particles of plastic powder fall into the air, they will encounter a fire source, and there is a danger of burning and explosion. Therefore, all hidden dangers must be eliminated and all fire sources must be isolated. Do not use a vacuum cleaner to remove the plastic powder on the ground. Wear a dust cover when working to protect personal safety.

Shipping info

Additional delivery notes

PICK UP OPTION

Sorry, our items are NOT available for pick-up.

PAYMENT

Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.

We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.

We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).

The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws.

Thank you for shopping with us on eBay!

Additional Information

No additional information at this time

Ask seller a question