100Pcs PTFE Flat Washers 12x22x2mm Sealing Spacer Flange Gasket White
Sealing gaskets are very suitable for sealing corrosive fluids, gases and extreme temperature environments, such as chemical processing plants, oil and gas industries, sealing pipes, valves and accessories, home sewing machine, electronic components and assemblies.
Specification
Color: White
Material: PTFE (Polytetrafluoroethylene)
Draw Ratio: 193%
Density: 2.15 g/cm³
Shore Hardness: 55 Shore D
Dynamic Friction Factor: 0.06
Dielectric Strength: 15 kV/mm
Tensile Strength: 19.5 Mpa
Compressive Strength: 10 Mpa
Working Temperature: -100°C to 250°C (-148°F to 482°F)
Size: 12 x 22 x 2 mm / 0.47 x 0.87 x 0.08 inch (ID*OD*Thickness)
Item Includes: 100 x Sealing Spacers
Advantage
1. Flat sealing gaskets are made of PTFE (Polytetrafluoroethylene), which has chemical resistance, high temperature resistance, low friction, anti-stickiness, corrosion resistance, corrosion resistance, and non-conductive properties, making them very suitable for sealing corrosive fluids, gases and extreme temperature environments.
2. PTFE washers show good sealing capabilities to various oil, water, air, effectively resisting the penetration of liquids or gases, and can also be used for cushioning, reducing pressure and friction, increasing the contact area and providing a support surface for fasteners.
Instruction
Before installing the gasket, make sure the surface is clean and dry, place the seal gasket on the intended area that needs sealing or cushioning, and tighten the fasteners firmly to compress the gasket to achieve a tight seal or effective cushioning
NOTE: Please confirm the washer diameter before ordering, and pay attention to regular inspection and maintenance of sealing gaskets
Specification
Color: White
Material: PTFE (Polytetrafluoroethylene)
Draw Ratio: 193%
Density: 2.15 g/cm³
Shore Hardness: 55 Shore D
Dynamic Friction Factor: 0.06
Dielectric Strength: 15 kV/mm
Tensile Strength: 19.5 Mpa
Compressive Strength: 10 Mpa
Working Temperature: -100°C to 250°C (-148°F to 482°F)
Size: 12 x 22 x 2 mm / 0.47 x 0.87 x 0.08 inch (ID*OD*Thickness)
Item Includes: 100 x Sealing Spacers
Advantage
1. Flat sealing gaskets are made of PTFE (Polytetrafluoroethylene), which has chemical resistance, high temperature resistance, low friction, anti-stickiness, corrosion resistance, corrosion resistance, and non-conductive properties, making them very suitable for sealing corrosive fluids, gases and extreme temperature environments.
2. PTFE washers show good sealing capabilities to various oil, water, air, effectively resisting the penetration of liquids or gases, and can also be used for cushioning, reducing pressure and friction, increasing the contact area and providing a support surface for fasteners.
Instruction
Before installing the gasket, make sure the surface is clean and dry, place the seal gasket on the intended area that needs sealing or cushioning, and tighten the fasteners firmly to compress the gasket to achieve a tight seal or effective cushioning
NOTE: Please confirm the washer diameter before ordering, and pay attention to regular inspection and maintenance of sealing gaskets
Hot Item
- 1.We accept eBay payment .
- 2.Payment must be received within 7 business days of auction closing.
- 1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
- 2.Items will be shipped within 1-3 business day when we received payment.
- 3.Delivery time depends on destination and other factors.
100Pcs PTFE Flat Washers 12x22x2mm Sealing Spacer Flange Gasket White
Sealing gaskets are very suitable for sealing corrosive fluids, gases and extreme temperature environments, such as chemical processing plants, oil and gas industries, sealing pipes, valves and accessories, home sewing machine, electronic components and assemblies.
Specification
Color: White
Material: PTFE (Polytetrafluoroethylene)
Draw Ratio: 193%
Density: 2.15 g/cm³
Shore Hardness: 55 Shore D
Dynamic Friction Factor: 0.06
Dielectric Strength: 15 kV/mm
Tensile Strength: 19.5 Mpa
Compressive Strength: 10 Mpa
Working Temperature: -100°C to 250°C (-148°F to 482°F)
Size: 12 x 22 x 2 mm / 0.47 x 0.87 x 0.08 inch (ID*OD*Thickness)
Item Includes: 100 x Sealing Spacers
Advantage
1. Flat sealing gaskets are made of PTFE (Polytetrafluoroethylene), which has chemical resistance, high temperature resistance, low friction, anti-stickiness, corrosion resistance, corrosion resistance, and non-conductive properties, making them very suitable for sealing corrosive fluids, gases and extreme temperature environments.
2. PTFE washers show good sealing capabilities to various oil, water, air, effectively resisting the penetration of liquids or gases, and can also be used for cushioning, reducing pressure and friction, increasing the contact area and providing a support surface for fasteners.
Instruction
Before installing the gasket, make sure the surface is clean and dry, place the seal gasket on the intended area that needs sealing or cushioning, and tighten the fasteners firmly to compress the gasket to achieve a tight seal or effective cushioning
NOTE: Please confirm the washer diameter before ordering, and pay attention to regular inspection and maintenance of sealing gaskets
Specification
Color: White
Material: PTFE (Polytetrafluoroethylene)
Draw Ratio: 193%
Density: 2.15 g/cm³
Shore Hardness: 55 Shore D
Dynamic Friction Factor: 0.06
Dielectric Strength: 15 kV/mm
Tensile Strength: 19.5 Mpa
Compressive Strength: 10 Mpa
Working Temperature: -100°C to 250°C (-148°F to 482°F)
Size: 12 x 22 x 2 mm / 0.47 x 0.87 x 0.08 inch (ID*OD*Thickness)
Item Includes: 100 x Sealing Spacers
Advantage
1. Flat sealing gaskets are made of PTFE (Polytetrafluoroethylene), which has chemical resistance, high temperature resistance, low friction, anti-stickiness, corrosion resistance, corrosion resistance, and non-conductive properties, making them very suitable for sealing corrosive fluids, gases and extreme temperature environments.
2. PTFE washers show good sealing capabilities to various oil, water, air, effectively resisting the penetration of liquids or gases, and can also be used for cushioning, reducing pressure and friction, increasing the contact area and providing a support surface for fasteners.
Instruction
Before installing the gasket, make sure the surface is clean and dry, place the seal gasket on the intended area that needs sealing or cushioning, and tighten the fasteners firmly to compress the gasket to achieve a tight seal or effective cushioning
NOTE: Please confirm the washer diameter before ordering, and pay attention to regular inspection and maintenance of sealing gaskets
Hot Item
- 1.We accept eBay payment .
- 2.Payment must be received within 7 business days of auction closing.
- 1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
- 2.Items will be shipped within 1-3 business day when we received payment.
- 3.Delivery time depends on destination and other factors.