For All Dodge Durango Catalytic Converter 2.5" Weld-On
⚠ READ BEFORE YOU BUY
Tap each one to read it
This 2.5" converter matches the vehicles in the fitment chart. We still recommend measuring your pipe before you buy.
This listing is for ONE converter. A dual exhaust needs two.
Universal weld-on converter. It is not a bolt-on part: an exhaust shop cuts it in and welds it.
If your vehicle is not in the chart, it does not fit. Not sure? Send us your VIN and we confirm before you buy.
Ships without a heat shield, exactly as shown in the photos.
Not for sale or use in California, Colorado, Connecticut, Maryland, Maine, New Jersey or New York. Orders to these states are cancelled.
On OBD-II vehicles (1996 and newer) a universal converter may not clear catalyst efficiency codes (P0420 / P0430).
BUILT TO LAST
250,000+ MILES
That is what our customers report.
OUR 250K CHALLENGE
Your converter quits before 250,000 miles? Show us the odometer and the next one is on us.
Spoiler: once it is welded in, it is not going anywhere.
🔥 FULLY WELDED. ZERO LEAKS. Bolt-on converters seal with gaskets and bolts that loosen with heat over the years and start leaking exhaust at the joints. A welded converter has no gaskets and no bolts: once it is in, it is sealed for good. | 🛡️ STAINLESS STEEL BODY Seam-welded stainless steel shell built to resist rust and road salt, year after year. |
⬢ CERAMIC HONEYCOMB CORE The catalyst core is held tight inside the shell: no rattling, smooth exhaust flow. | 🔌 O2 SENSOR PORT READY Built-in port for your oxygen sensor: plug it in and go. |
QUICK ANSWERS ▼ TAP TO OPEN / CLOSE
| Pipe size (in / out) | 2.5" outside diameter |
| In the box | 1 catalytic converter |
| Installation | Weld-on: an exhaust shop cuts and welds it in |
| Bolt-on / direct-fit? | No |
| Overall length | 11 in |
| Heat shield, clamps, hangers, gaskets | Not included |
| O2 sensor port | 1 port per converter |
| Ships to CA, CO, CT, MD, ME, NJ, NY? | No: those orders are cancelled |
| Built to last | 250,000+ miles, as our customers report. Doesn't make it? Show us the odometer and the next one is on us |
| Turns off the check engine light? | Not guaranteed on OBD-II (1996+): it may not clear P0420 / P0430 |
FREQUENTLY ASKED QUESTIONS ▼ TAP TO OPEN / CLOSE
✚ How does it work after I buy?
Right after your order we send you a message on eBay. Here is what it asks, so you can have it ready:
- Your vehicle: year, make, model and engine (example: 2023 Dodge Durango 5.7L).
- Your pipe measurement: start at the muffler and follow the exhaust pipe forward; the first can with a sensor wire on it is your converter. Wrap a soft tape or a string around the straight pipe, 3–4 in away from it, and send us that number (see HOW TO PICK YOUR SIZE).
- You have 24 hours to reply. It is optional, but with your measurement you are 100% sure you get the exact size. Something does not match? We fix it before shipping.
- No reply? We ship the size in this listing, matched to your vehicle by our fitment system: years of work and 95% accurate.
✚ Check engine light with P0420 / P0430: what should I check first?
These codes mean the converter is working below efficiency, but the converter is often
not the root cause. Fix the cause first, or the new converter can fail too:
- Old or worn spark plugs, bad ignition timing or a misfire
- Faulty upstream or downstream O2 sensor, or damaged sensor wiring
- Rich or lean fuel mixture, leaking injectors or high fuel pressure
- Oil or coolant burning into the exhaust
- Faulty EGR valve or engine coolant temperature sensor
- Cracked or leaking exhaust parts
- Internal engine wear
✚ How do I know my converter is failing?
- Check engine light with P0420 / P0430
- Weak acceleration or sluggish engine
- Metal rattling from inside the converter
- Higher fuel use
- Rotten egg (sulfur) smell from the tailpipe
- Heavy smoke or a hot, glowing converter
✚ Will a new converter fix the rattle or the lost power?
If your old converter is broken or clogged inside, yes: a new one stops the rattle and lets the exhaust flow again, so the power you lost comes back. If the problem is elsewhere (see P0420 / P0430 above), fix that too.
✚ Why welded and not bolt-on?
No gaskets and no bolts to loosen with heat and leak: once it is in, it is sealed for good (see FULLY WELDED above).
✚ What is inside?
A ceramic honeycomb catalyst core in a seam-welded stainless steel shell, with one O2 sensor port.
HOW TO PICK YOUR SIZE ▼ TAP TO OPEN / CLOSE
STEP 1Follow your exhaust pipeStart at the muffler (back of the car) and follow the pipe forward. The first can with a sensor wire on it is your converter. That pipe is the one you measure.

STEP 2Wrap a tape around the pipeUse a soft sewing tape or a string on the straight pipe, 3–4 in away from the converter. Not on the joint or weld: it reads bigger. Check both sides.

STEP 3Find your number in the tableThe AROUND number tells you the size to buy.
| PIPE | ACROSS | AROUND |
|---|
| 2" | 50.8 mm | 6.28" |
| 2.25" | 57.2 mm | 7.07" |
| 2.5" ← this listing | 63.5 mm | 7.85" |
| 3" | 76.2 mm | 9.42" |
STEP 4Reply to our message after you buySend us your measurement and your year, make, model and engine. We wait up to 24 hours. No reply? We ship the size you ordered.
Older car or unknown history? Always measure: the pipe may have been cut or changed. The fitment chart is factory data; your tape is the final word.
Small difference? An exhaust shop can usually close up to 1/4 in (6 mm) of pipe diameter with an expander, a reducer or extra welding. Bigger needs an adapter (not included).
WHERE WE SHIP ▼ TAP TO OPEN / CLOSE

For All Dodge Durango Catalytic Converter 2.5" Weld-On — brand-new, universal weld-on part (fitment chart from official data), quality-checked and shipped fast from the USA by The Liberty Parts with tracked delivery and easy returns.
- Brand-new, high-quality replacement part
- Universal weld-on — see the fitment chart below
- Fast, tracked shipping from within the USA
▸ Specifications
| Type | Catalytic Converter |
| Fitment Type | Universal |
| Inlet Diameter | 2.5 in |
| Outlet Diameter | 2.5 in |
| Items Included | 1 Catalytic Converter |
| Placement on Vehicle | Exhaust |
| Body Material | Stainless Steel |
| Substrate Material | Ceramic |
| Restricted States | CA, CO, CT, MD, ME, NJ, NY |
| Converter Type | Universal |
| Overall Length | 11 in |
| Inlet Type | Weld-On |
| Outlet Type | Weld-On |
| Body Shape | Round |
▸ Fits Dodge · 279 vehicle configurations
The pipe size of this universal part matches these Dodge models (official fitment data) — see the chart below:
600AvengerB100B150B1500B200B250B2500B300B350B3500CaliberCaravanChallengerChargerCoronetD100D150D250D300D350DurangoJourneyMonaco…and more
▸ Full Fitment Chart · 279 vehicles ▾ tap to open
| MAKE | MODEL | YEARS |
|---|
| Dodge | 600 | 1985-1988 |
| Dodge | Avenger | 2008-2009, 2011-2014 |
| Dodge | B100 | 1975-1980 |
| Dodge | B150 | 1981-1994 |
| Dodge | B1500 | 1995-1998 |
| Dodge | B200 | 1975-1980 |
| Dodge | B250 | 1981-1994 |
| Dodge | B2500 | 1995-1998 |
| Dodge | B300 | 1975-1980 |
| Dodge | B350 | 1981-1994 |
| Dodge | B3500 | 1995-1998 |
| Dodge | Caliber | 2007-2012 |
| Dodge | Caravan | 1984-2007 |
| Dodge | Challenger | 2008-2023 |
| Dodge | Charger | 1975-1978, 1985-1987, 2006-2023 |
| Dodge | Coronet | 1975-1976 |
| Dodge | D100 | 1975-1979, 1984-1989 |
| Dodge | D150 | 1977-1978, 1989-1991 |
| Dodge | D250 | 1989 |
| Dodge | D300 | 1980 |
| Dodge | D350 | 1981-1989 |
| Dodge | Durango | 1998-2009, 2011-2023 |
| Dodge | Journey | 2009-2017 |
| Dodge | Monaco | 1975-1976 |
| Dodge | Nitro | 2012 |
| Dodge | Ram 1500 | 1994-2010 |
| Dodge | Ram 2500 Van | 1999 |
| Dodge | Ramcharger | 1975, 1981, 1989-1991 |
| Dodge | Sprinter 2500 | 2003-2006 |
| Dodge | Sprinter 3500 | 2003-2006 |
| Dodge | Viper | 1996-2006, 2008-2009 |
| Dodge | W100 | 1989 |
| Dodge | W150 | 1989-1991 |
| Dodge | W200 | 1975, 1979-1980 |
| Dodge | W250 | 1989 |
| Dodge | W350 | 1982-1989 |
💬 Questions? Contact us — we're here to help!
Message us anytime. A real person answers fast — before and after your purchase.
🔎 Not sure it fits? Send us your vehicle's VIN and we'll confirm before you buy.
✅ Fit Check Before You Buy
Send us your VIN: we check the official data and confirm the pipe size before you order.
▸ Why Buy From The Liberty Parts
🎯
Official Fitment Data
Sizes matched with manufacturer data
🇺🇸
USA Stock
Ships fast from within the United States
📦
Pro Packaging
Protected so it arrives like it left
💬
Real Support
A person answers — before and after the sale
⚡ Shipping & Handling ▾
Ships within 2 business days from the USA. After your order we wait up to 24 hours for your pipe measurement, then ship. Tracking on every order.
⟲ Returns & Refunds ▾
30-day returns accepted. Keep the item unused and in its original packaging, and message us first so we can make the process fast and easy.
🛡 Warranty ▾
1-month warranty against defects. If a part arrives defective, contact us with a photo and we make it right.
◈ About The Liberty Parts ▾
We specialize in quality auto parts at fair prices, shipped fast from the USA. Questions before or after your purchase? Message us — we reply fast.
★ ORDER NOW — FAST DISPATCH · TRACKED DELIVERY · EASY RETURNS ★
THE LIBERTY PARTS
THANK YOU FOR CHOOSING US