📡 DJI Neo 2 Digital Transmission Module – Stable Low-Latency Image Transmission for Remote Control & Goggles

---

Friendly Reminder: Due to current official stock shortages, this genuine DJI product is only available via limited authorized reseller channels. The pricing is adjusted based on market supply and demand dynamics. Please review the details carefully before purchasing. Thank you for your understanding.

---

📦Packing List

• 1 × DJI Neo 2 Digital Transmission Module (Essential for stable image transmission when using the remote controller or goggles; install before powering on the aircraft)

---

🔍 Product Overview

The DJI Neo 2 Digital Transmission Module is a critical component designed to enable stable, low-latency image transmission when controlling your DJI Neo 2 drone with the remote controller or goggles. This module ensures seamless communication between the drone and its control devices, delivering real-time visuals and responsive flight control for an immersive flying experience.

Important Note: This module must be installed prior to powering on the aircraft—hot-swapping is not supported. Proper installation and handling are required to maintain optimal performance and avoid damage.

---

⚙️ Technical Specifications

Physical Design & Build

• Dimensions (L × W × H): 44.6 mm × 27 mm × 44.6 mm (compact size for seamless integration with DJI Neo 2).

• Weight: Approximately 9g (lightweight, adds minimal burden to the drone’s overall weight).

Compatibility

• Adapted Product: DJI Neo 2 (specifically designed for use with this drone model only).

---

✨ Key Features

1. Stable Low-Latency Transmission

• Enables real-time image transmission with minimal delay, ensuring precise control and clear visuals when flying with the remote controller or goggles.

1. Essential for Remote Operation

• Required for connecting the remote controller or goggles to the DJI Neo 2, unlocking full flight functionality.

1. Secure Installation Required

• Must be properly installed before powering on the aircraft—hot-swapping (removing/replacing while powered) is not supported to prevent damage or malfunctions.

1. Antenna Care Guidelines

• Avoid applying external force to the antennas to prevent deformation, which could degrade signal quality.

1. Regular Maintenance Reminder

• After every 30 hours of flight (approximately 60 flights), inspect the module’s screws for looseness and tighten them securely to maintain stable connections.

---

💡 Usage Tips

1. Installation

• Install the module before turning on the DJI Neo 2 drone to ensure proper initialization and avoid startup errors.

1. Antenna Handling

• Handle the antennas with care—do not bend, twist, or apply pressure, as this may weaken signal transmission.

1. Flight Hours Tracking

• Keep track of your total flight time (approx. 30 hours or 60 flights) and regularly inspect the module’s screws to prevent loosening during flights.

1. Compatibility Check

• This module is exclusively for DJI Neo 2—do not attempt to use it with other DJI drone models.

1. Power-On Protocol

• Ensure the module is fully seated and secured before powering on the drone to avoid connection issues or signal interference.

---

⚠️ Notes

• Hot-Swapping Not Supported:

• The module must not be removed or replaced while the drone is powered on, as this can cause permanent damage to the module or drone electronics.

• Antenna Protection:

• Avoid physical stress on the antennas (e.g., bending, pulling, or crushing), as deformation can lead to poor signal quality or transmission failures.

• Screw Maintenance:

• Regularly check and tighten the module’s screws every 30 hours of flight (approx. 60 flights) to ensure stable connections and prevent operational issues.

• Compatibility Limitations:

• This module is designed solely for DJI Neo 2 and is not compatible with other DJI drone series (e.g., Mini, Air, Mavic).