Shiny Silk PLA 3D Printer Filament

·

Recommend Settings

Nozzle/Extrusion temperature: 210℃ - 225℃ (410℉ - 437℉);

Bed/Platform temperature of 70℃ - 80℃ (158℉ - 176℉);

Printing speed: 30-60mm/s;

These settings are for 0.4mm nozzle, it may be different with different diameters nozzle.

·

Please do 3 steps checking to make the filament more sticker to the build bed.

Temperature-Please check the temperature(bed and nozzle) settings before printing and set it suitable;

Building Bed-Please check if the bed is level, make sure the nozzle doesn't too far or too close to the bed;

Speed-Please check if the printing speed of the first layer is too fast(Recommended: 20-40mm/s).

·

Notes

Please insert the filament into the side holes after use to avoid tangles;

Please store the 3D printer filament in a sealed bag or box after using it.

①【Shiny SILK PLA Filament】Compared to regular PLA 3D printer filament, SILK PLA 3D printer filament has a glossy, smooth silky surface that does not require polishing.fantastic SILK filament has great colour and shine,making it ideal for printing art and craft.Great SILK PLA filament for any 3D print job.It has a nice silk looking shine on prints.
②【Great Easy to Print】Feed smoothly and constantly without clogging the nozzle or extrude.Smooth 1.75mm SILK PLA 3D filament(Tolerance Level : ± 0.02mm).1 kg spool (2.2lbs),330m each spool.Minimum tolerance and low warping to ensure consistent feeding and fast prints,say goodbye to clogging.
③【Recommend Settings】premium SILK filament offer the advantage of incredible ease of 3d printing. SILK filament 1.75mm ,optimized print quality,high purity with low shrinkage and superb interlayer adhesion. Recommended SILK filament Print nozzle temperature 205-215℃, Hot bed temp: 60°C-80°C, Print speed: 30-60mm/s.
④【Neatly Wound Filament】has a professional production line with strict control of neatly lined up lines to avoid knots during printing.Completely mechanical wire winding and strict manual checks to ensure a neat lines of SILK PLA filament with few knots, avoiding possible breaks.
⑤【1KG Spool Diameter】Spool Diameter: 203.2mm(8inches), Spool Width: 63.5mm(2.5inches), Spool Hub Hole Diameter: 55.88mm(2.20inches). 1KG spool size of the filament spool is suitable for hanging on a lot of FDM 3D printers.
⑥【Vacuum Packed & No Bubbles】SILK PLA filament 3D printer filaments are all vacuumed sealed along with a desiccant pack.Vacuum packaging to avoid dust and protect filament. No Bubbles,lower shrinkage, lower warping.