eBay

ANCEL ANJ400 Ultrasonic Fuel Injector Cleaner Tester Nozzle Cleaning Tool Kit 110V

⭐ 【Ultrasonic Cleaning】:The injector cleaning machine adopts ultrasonic powerful cleaning technology, which has a strong cleaning ability and can completely remove the stubborn carbon deposits on the fuel injector.

⭐ 【10 Core Functions】:10 Core Functions:Ultrasonic Cleaning,Resistance test,Uniformity/spray test,Leak test,Injection flow test,Working modes test,In-Vehicle Cleaning,Low-resistance injector test function,Multiple item settings,Version information

⭐ 【Digital Display】:With the help of microcomputer control and digital display, the equipment makes possible automatic cleaning, testing injectors and real-time monitoring of the dynamic values.

⭐ 【Wide Application】:The fuel injector cleaner machine simulates various working conditions of the engine and can clean and inspect the fuel injectors of various motorcycles.

⭐ 【Four-cylinder Test】:Simultaneously tests 4 fuel injectors, allowing for intuitive comparison of the atomization, blockage, and fuel injection volume of each injector.

⭐ 【Warranty】For the damage caused by non-human factors, ANCEL promises to resend the parts for free within 2 years. For any demand, we warmly welcome you to contact us, and we will reply you as soon as possible within 24 hours.

ANCEL ANJ400 Main Functions

⭐ Ultrasonic cleaning: To clean injectors to remove carbon deposition completely

⭐ Resistance test: To test the resistance of the fuel injector

⭐ Uniformity/spray test: To test the uniformity of injection quantity of each injector and monitor the spray status of each injectorwith the help of the backlight

⭐ Leak test: To test the sealing and dribbling conditions of injectors under system pressure

⭐ Injection flow test: to check the injection quantity of the injector in 15 seconds of constant injection

⭐ Working modes test: To test injectors in different working conditions

⭐ In-Vehicle Cleaning: Coming with a variety of disassembly-free cleaning connectors, the device can be used to perform in-vehicle cleaning and maintenance for various vehicle models

⭐ Low-resistance injector test function: Through the dedicated motherboard, support long and full low-resistance fuel injector test, such as 1 ohm

⭐ Multiple item settings: Set different device parameters, including ringer sound level, screen brightness and backlight brightness

⭐ Version information: To check the current device software version information

Full inspection of injectors

Uniformity test: To test the uniformity of injecting amount of each injector.

Sprayability test: To monitor the spraying status of each injector with the help of backlight.

Leakage test: To test the sealing and dribbling conditions of injectors under high pressure.

Injecting flow test: To check the injecting amount of the injector of specific injection condition(eg. same time and number of times).

Ultrasonic cleaning

It sends signals to the injectors through the pulse signal line, using the cleaning fluid with the ultrasonic vibration so as to completely remove the carbon and impurities inside the injectors.Clean Multiple Injectors At The Same Time

Support 110V supply voltage; support simultaneous cleaning and testing of 4-cylinder injectors; support testing of standard injectors for automobiles and motorcycles.

Ultrasonic cleaning power: 100W.

On-Vehicle Cleaning

The unit is equipped with various adapters and couplers that facilitate cleaning on the injectors on vehicle.

Reverse Cleaning
Reverse flush is a way to clean the injectors with the test liquid flowing from the outlet to the inlet of the injector. Reverse flush may remove the dirt inside the injector or the injector strainer (Only for the top fuel supply injector).

Working Conditions:

Temperature： -10~+40℃
ReIative humidity：＜85％
lntensity of outer magnetic field ：<400A/m
No naked flame within 2m

Specifications:

Main unit power supply AC220V±10％ 50Hz/60Hz or AC110V±10％ 60Hz

lnput power：230
Ultrasonic cleaner power ：100W
Resistance test accuracy: 0.1Ω
SimuIated RPM range:100～9900rpm ，
step: 10rpm
Time range: 5~300s
step: 5s
Pulse width: 0.1～25ms,
step: 0.1ms
FueI tank capacity: 2000ml
Work pressure:0-7bar

Packing List

1 x Fuel Injector Tester & Cleaner
2 x adjusted screw
1 x Fuel feed funnel
1 x Fuel pipe
4 x 5 Φ11 underlay of injector
4 x Injector plate Φ14 flat plate
1 x Pulse line of injector（4 injectors)
1 x Power line
4 x Special line
1 x Top feed injector rail
10 x Sealed ring of connectors(7.52x3.53)
3 x R1/4blank plug
4 x European standard connectors Φ13.6
4 x Standard connectors Φ10.6
4 x Connector of Benz mechanical injector (M12x1.5)
4 x Conector de inyector Φ12.5 (GDI Conector)
4 x Conector de inyector Φ9.8 (GDI Conector)
4 x Conector de inyector ΦM18 (GDI Conector)
1 x Tool box

ANCEL ANJ400 Operation Process

1. Clean injector's outside with gasoline or cleaning liquid before turning on the machine
2. Putting injectors in ultrasonic bathtub after the outside of injector is free of dirt.
3. Turn on ultrasonic system, allowing the ultrasonic energy to dislodge any particles even build-up inside the injectors.
4. Fix injectors on the machine
5. Test injectors for resistance, shorts, and current draw
6. Perform leak test, spray pattern, and flow rate testing on flow bench.
7. The injectors are now returned to the flow bench for retesting of all functions.

Cleaning & testing sequences
Recommended to carry out the complete cleaning and testing procedures as the following order.
1. Ultrasonic cleaning;
2. Uniformity / Sprayability test;
3. Leakage test;
4. Injecting flow test;
5. Working modes test.

Procedure after work operation
1) Drain test solution to a fuel container.
2) Switch off the power switch and unplug the power plug.
3) Use a fuel header to suck all cleaning agent in the ultrasonic cleaning pool, and wipe the pool with a soft dry
cloth.
4) Wipe the table top of the machine with a soft dry cloth.
5) To avoid volatilization, all the test solution in the fuel tank should be discharged. If it can be used again, store it
in a safe place. If it is dirty and cannot be used any more, dispose it according to relevant regulations.