The SIG P365 Loaded Chamber Indicator Delete Plug is a precision-engineered part made from Carbon Fiber Reinforced material, offering enhanced durability and lightweight performance. 
Designed for easy push-installation, this part provides a simple solution for users looking to eliminate the loaded chamber indicator on their P365, improving the firearm's aesthetics and functionality. 
The carbon fiber construction ensures both strength and resilience, while the user-friendly installation process makes it a convenient upgrade for any enthusiast.

           * The New Version make the part follow the profile of the slide *


• High quality Carbon Fiber Reinforced  Material with exceptional strength and heat resistance

• Easy push install

• Fits P365, X, XL, X Macro 

Installation Instructions

1. Ensure the firearm is unloaded and pointed in a safe direction.

2. Using a T-10 screwdriver, remove the two screws securing the optics plate. Lift the plate off.

3. Remove the factory-installed LCI and spring.

4. With a cotton swab, clean any grease from the LCI cavity.
Apply a small amount of oil to all surfaces where the LCI was seated.

5. Align the LCI delete plug with the cavity and gently press it into place.

6. Once the plug is slightly recessed and fully seated, reinstall the optics plate.
Secure it by torquing the T-10 screws to 9 in-lbs.

7. Perform a function check on your firearm.




Removal of the LCI Delete Plug

  • Use a small flathead screwdriver to gently pry under the back edge of the plug.
  • Lift upward, rocking slightly back and forth if needed.
  • With a bit of patience, the plug will come out easily.