Please select a foam nozzle with an adapter compatible with your pressure washer (see dimensions below for reference):
A. For Karcher K-series pressure washers;

B. For AR Blue Clean / Black & Decker / Michelin / some Interskol products / some Greenworks Europe products / Makita / most Bosch pressure washers;

C. For Elitech pressure washers / some Interskol products / YILI / some Huter products / some Patriot products / Dawoo / Sun Joe products;

D. For Nilfisk / STIHL / HUSQVARNA / Gerni / some Greenworks products;

E. For Lavor pressure washers / some Hammer Flex products / some Interskol products / some Huter products / Sterwins / Vax / Champion / Craftsman / Briggs Stratton products;

F. For some Huter / Anlu / Kolher pressure washers;

G. For some Bosch, Portland, Greenworks US, Husky, Faip, and some Hammer Flex pressure washers;

h. For Kranzle, Bosch GHP, and water guns with an M22 female connector;

i. For some Karcher Pro HD/HDS pressure washers (standard trigger gun with a standard M22 male output);

j. For some Karcher Pro HD/HDS pressure washers (EASY FORCE trigger gun);

k. For Nilfisk Kew and some Karcher HD professional pressure washers;

L. 1/4" quick plug, a common connector in North America.

Package Contents: 1. Snow Foam Cannon Body,

2. 1-Liter Bottle with Volume Measurement Line, 3. Suction Tube,

4. Selectable Adapter, 5. Additional Brass Nozzle for High-Pressure Washers (over 130 bar (1850 psi)).

Description: The BEAR FORCE plastic foam cannon is specially designed to combine all the advantages of the brass version, producing extra-dense foam by combining soap and high-pressure water from your pressure washer. Thanks to our patented design, it can spray an extra-dense foam on your car, motorcycle, floors, sidewalks, deck, or any other washable surface.

Why Choose the Bear Force Snow Foam Cannon?

1. Powerful foam cannon, sprays soapy foam up to 6 meters/20 feet;

2. Lightweight, corrosion-resistant, and durable plastic body; precision-engineered metal injector ensures abundant, dense foam with less soap mixture. 3. A large, improved stainless steel filter with even wires for a richer foam.

4. The foam gun comes with a 1.10 mm brass nozzle, which works efficiently with pressure washers from 60 to 130 bar (900 to 1850 psi). The additional 1.25 mm nozzle included in the box is typically for pressure washers above 130 bar (1850 psi). If you have a very powerful pressure washer, please unscrew the 1.10 mm nozzle from the foam wand using a flathead screwdriver, then attach the 1.25 mm nozzle to the foam wand.

5. A 1-liter (33 oz) bottle with a measuring mark is transparent so you can see how much car wash shampoo is left. It is made of chemical-resistant high-density polyethylene (HDPE).

6. Use less soap, in a more environmentally friendly and efficient way! For a rich lather, use a 1:5 ratio of car wash shampoo to water in the bottle.

7. Thanks to the filter at the end of the suction hose, particles trapped in the soap or water are filtered out, protecting your car's paint from scratches. Foam Master pays attention to every detail to provide the best care for your vehicle.

How to Use:

1. Attach the adapter to the foam wand using the tightening strip, then connect it to your pressure washer gun or extension wand.

2. For a rich lather, add approximately 20% car wash shampoo and 80% water to the bottle.

3. The control knob regulates the amount of soap and water drawn from the bottle.

4. Thanks to the adjustable spray nozzle on the foam gun, you can adjust the spray pattern from a strong stream to a wide spray pattern.

5. The higher the pressure of your pressure washer, the more lather the foam gun will produce. We recommend using a pressure washer with a pressure of over 120 bar (1750 psi).

Note:

1. The foam gun works perfectly with pressure washers ranging from 60 to 160 bar (900 to 2320 psi). However, it is not compatible with garden hoses or ribbon hoses.

2. Since there are two types of adapters for this brand of pressure washer, please check the adapter size and ensure it is compatible with your machine. We are not responsible for any adapter incompatibility issues. If you have any questions, please send us a photo of your spray gun and foam gun, and we will help you choose the correct adapter.