Parameters
| Model | K6238AL |
| Voltage | 110V |
| Material of machine body | 201 stainless steel |
| Blade | 420 stainless steel |
| Dicing thickness | Unadjustable, 10mm (0.39'') |
| Dicing grid knife | 6mm*1pcs (We can also provide other grid knives with the specifications of 8mm, 10mm, 12mm and 16mm. If you need them, please feel free to contact us.) |
| Size of food tank | 304 stainless steel, 28.5*7.5*7cm (11.22*2.95*2.76 inches) |
| Working mode | Electric dicing |
| Rotating speed | 200rpm |
| Motor | 150W |
| Machine size | 44.5*26*33cm (17.52*10.24*12.99 inches) |
| Net weight | 12.8kg (28.22LBs) |
Precaution
- This machine is only for indoor use, and cannot be used outdoors or for other purposes.
- Before cleaning the machine, disconnect the power switch of the machine, unplug the power adapter, and operate with caution to avoid knife injury danger!
- Do not flush the machine with spray water or clean the machine in water.
- The blade on the cutting disc is extremely sharp. Before installing or removing the cutting disc, disconnect the power switch of the machine, unplug the power adapter, and operate with caution.
- The cutting disc can be removed from the machine and washed with water alone, but pay attention to the installation and disassembly of the cutting disc, do not touch the blade edge, and grasp the cutting disc tail adjustment knob, to prevent knife injury danger and fall injury!
- Do not push the food by hand. When the machine is operating, it is forbidden to put the hand into the food trough, to adjust the cutting thickness of the cutting knife plate, and to put the hand into the machine outlet, otherwise there will be danger of knife injury!
- Do not use the machine to cut frozen food or solid materials such as bone.
- Pay attention to protective measures, do not remove the protective cover or protective plate for cutting. Be careful not to touch the cutting blade when putting food into the trough.
- Install the rubber strip on the protective cover or other edge corners of the machine to prevent contact damage.
- Do not place the machine near the heat source, such as electric stove and gas stove, in order to avoid damage to the machine.
- This machine is only suitable for cutting fruits and vegetables. Do not use it for cutting hard food (shell, stone, nut sugar, cane, etc.). Do not cut meat or other products, bone, tough skin or other hard materials.
Product Features & Advantages
1. High Dicing Efficiency: Quick and efficient dicing, allowing continuous operation, simulating the manual dicing mode, and forming uniform and square dices.
2. Strong Power: Adopting the 150W copper motor with stable power, low energy consumption and long service life.
3. High Stability: Made of stainless steel, ensuring stable dicing and avoiding shaking.
4. Good Durability: The thickened alloy steel knife and stainless steel bearing are combined to ensure high sharpness and wear resistance. The durable metal gears are wear-proof and durable, and the operation is more stable.
5. Simple Operation: One-key dicing, easy and convenient operation, and one-time forming.
6. Safety Protection: 4-grade protection for dicing safety, avoiding injuries, splashing, electric shock and other risks.
7. Wide application: Suitable for dicing various fruits and vegetables and applicable to different scenarios such as canteens, fruit shops, restaurants and families.
Press Rod
The convenient press rod is adopted to facilitate feeding, and is detachable and convenient to use and store. The food can be easily placed into the feeding chamber and effectively fixed by the press plate, and the dicing effect is well guaranteed.
Safety Lock
The safety lock can effectively fix the cutterhead and prevent the cutterhead from being separated from the machine body. The quick release design is simple, safe and convenient.
Power Switch
The power switch is simple in structure, easy to operate, resistant to wear and corrosion, safe and durable. It can be turned on to conduct electric dicing operation and greatly improves the dicing efficiency and stability.
Cutting Assembly
The cutterhead and 6mm dicing grid knife are sharp, firm and durable and are well combined to achieve efficient dicing. Other dicing grid knives with the specifications of 8mm, 10mm, 12mm and 16mm can also be purchased. If you need them, please contact us.
Operation Method
- Install the press handle and the dicing grid knife in place.
- Press the press handle to pull the food push plate, place the food into the food tank, and gently release the press handle to press the food.
- Connect the machine to the 110V power supply, turn on the power switch, and the machine starts to dice the food.
- Place a container below the discharging outlet to collect the dices.
- After dicing, turn off the power switch, disconnect the power supply and clean the machine thoroughly.
110V Commercial Electric Vegetable Dicer & Fruit Slicer Machine, 6MM Dicing Grid Knife#15TOP3231
| Shipping Information ▲ Default shipping cost or free shipping service is only for the customers from Canada or the lower 48 United States by Canada Post, USPS or the UPS Ground. Customers from other areas or needs other shipping ways, please contact us. ▲ Buyers from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO addresses or other countries/areas, there WILL be extra shipping costs, please contact us for more detailed information. ▲ Please make sure your address is valid for both UPS and USPS services. Any costs incurred because of incorrect or undeliverable address should be undertaken by buyer. Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays. Sales tax / Customs duties: Any sales taxes or Customs duties are not included. If came out, they must be undertaken by the buyer. Damage In Shipping: Email or call us First! We will work with you to get the case resolved in the fastest method. |
| Return / Refund If you are not 100% happy with your purchase, please contact Us. Please don't directly opened a request or case without informing us, or else, we will do some discounts on the warranty and other sales-services later on. Hope for your understanding. Returns & Exchanges ▲ All returns must be made within 14 days of delivery date. Items must be in new, unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on the condition. ▲ Items returned under the buyer’s remorse: The return shipping fee must be covered by the buyer; The original shipping cost will also be deducted from the refund. 15% restocking fee of the items purchase price will be charged. ▲ Returns that are the result of our seller's error: Buyer will receive a full refund of the item as well as shipping charges ▲ All returns require a RA (Return Authorization) number that will be given by our seller. Please contact with us at first for more details. |
| Defective & Damaged Products ▲ If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it's much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding. ▲ Replacement or refund of defective or damaged products can only be returned in exchange for the exact same product, or else, the purchase price will be refunded back to your original payment method. ▲ If an item is received damaged, customer service must be contacted within 7 days of receiving your item. All returns require a RA (Return Authorization) number as above. |
| Payment eCheck Issues: Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear. Then we will arrange shipments for you. |
| Warranty & Feedback ▲ 6 months' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost. ▲ Any warranty shipping cost to us is responsible by buyer. ▲ Any shipping cost to buyer is responsible by the seller. ▲ We committee to the customer satisfaction and want to bring you the best purchase experience. If there is any problems, please contact us ASAP. If not, please leave us a positive feedback as it's very important for us. Thanks very much. |
On Mar 23, 2026 at 22:08:16 PDT, seller added the following information: