• Compatibility:
    • 2019 Honda Civic 1.5L
    • 2016-2019 Honda Civic 2.0L
     
  • Features:
  • -OE design to ensure exact fit, form and function for an easy drop-in installation;
  • -Built with high density multi-lowered fins for maximum cooling efficiency;
  • -ISO 9001 certified manufacturing plants;
  • -Direct Replacement;
  • -Improve Cooling Efficiency;
  • -100% Leak Tested;
  • -Plastic tanks with aluminum core;
  • -Built to strict quality control standards;
  •  
  • How to clean radiator:

    • For 2019 Honda Civic 1.5L 2016-2019 Honda Civic 2.0L Aluminum Radiator

    Compatibility:

    • 2019 Honda Civic 1.5L
    • 2016-2019 Honda Civic 2.0L

     

    Features:

    -OE design to ensure exact fit, form and function for an easy drop-in installation;

    -Built with high density multi-lowered fins for maximum cooling efficiency;

    -ISO 9001 certified manufacturing plants;

    -Direct Replacement;

    -Improve Cooling Efficiency;

    -100% Leak Tested;

    -Plastic tanks with aluminum core;

    -Built to strict quality control standards;

     

    How to clean radiator:

    • Cleaning Radiator Fins
    1. ​Step 1: Let the Radiator Cool Down
    2. Step 2: Dilute the Cleaning Solution
    3. Step 3: Clean the Radiator Fins With the Solution and Soft-Bristled Brush
    4. Step 4: If Some Radiator Fins Get Bent, Straighten With a Flathead Screwdriver
    5. Step 5: Rinse the Radiator Fins With a Hose
    6. Step 6: Let the Radiator Fins Air Dry
    • Flushing a Radiator
    1. ​Step 1: Let the Engine Cool Down
    2. Step 2: Put a Catch Pan or Bucket Underneath the Radiator
    3. Step 3: Drain Out the Coolant
    4. Step 4: Dilute the Flushing Solution
    5. Step 5: Pour the Flushing Solution Into the Radiator
    6. Step 6: Drain Out the Flushing Solution
    7. Step 7: Pour Distilled Water Into the Radiator
    8. Step 8: Refill Coolant Into the Radiator
    9. Step 9: Monitor the Cooling System and Resolve Issues

     

    How to replace the radiator:

    1. Remove the air duct and disconnect the negative battery cable. Take off the air cleaner assembly, and drain the cooling system into a resealable container. Take off the radiator's inlet hose and remove the transmission's cooler lines.
    2. Take off the fan shroud clips on the condenser tubes, and remove the bolts that connect the fan shroud to the condenser bracket. Remove the air deflectors.、
    3. Disconnect the coolant hose from the radiator overflow and take off the radiator support brackets on the fan shroud. Disconnect the electrical connectors on the engine cooling fan motor, and remove the fan motor harness from the fan shroud clips. Remove the fan shroud.
    4. Take off the radiator's outlet hose and disconnect the transaxle oil cooler pipes.
    5. Tile the radiator towards the rear and remove the condenser brackets. Lift the condenser brackets and the mounting tabs and position them out of the way. Lift the radiator carefully out of the engine compartment and install the new radiator.
    6. Reinstall and reconnect the engine components in the reverse order that they were removed.
    7. Fill the new radiator with a mixture of half water and half engine coolant. Start the engine and let it run for a couple of minutes, then turn it off and add more fluids, if necessary. Reattach the negative battery cable.

     

    Note:

    1. Tips

             Engine coolant can be reused if it isn't old or contaminated. However, if you choose not to reuse it, take it to a garage or a hazardous waste facility for proper disposal.

         2.Warnings

            To avoid scalds, wear gloves and protective clothing before changing the radiator, and always be sure the engine is cool before replacing the radiator. Be sure to keep engine coolant in a sealed container out of the reach of children and pets. If any is spilled, clean it up immediately.

     

    Package:

    1pc of brand new radiator


    Item Specifics
    Brand hilamps
    Type Radiator
    Material Aluminum
    Placement on Vehicle Front
    Manufacturer Part Number 11379921
    Manufacturer Warranty 1 Year
    Interchange Part Number CU13583,Engine Rad,Replacement Radiator,0.63in.Core Thickness
    Outlet Diameter 1 1/4in.
    Universal Fitment No
    Inlet Diameter 1 1/4in.
    Item Height 17.25in.
    Item Length 21.58in.
    Item Thickness 0.63in.
    Modified Item No
    Features Crossflow Radiator
    Custom Bundle No
    Core Material Aluminum
    Tank Material Plastic
    OE/OEM Part Number RAD13583,engine radiator,cooling radiator,air radiator,aluminium
    Superseded Part Number DPI13583,AC13583,RAD13583

    Payment
    1.We accept any payment which can be accepted by eBay.
     
    2.Please do check the shipping address. If you want to change the shipping address, please contact us by eBay messages.
     
    3.If you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.
     
    4.Payment must be received within 10 days as auction ended or order might be delayed.
    Shipping
    1. Orders processed within 24 hours of payment verification. (if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
     
    2. The images shown are not the actual item and are for your reference only.
     
    3. Fast shipping: All our packages use USPS First Class/UPS/Fedex... Package Service
     
    4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
    Returns
    1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
     
    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
     
    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
     
    4. Return shipping is to be paid by the Buyer.
    Feedback
    1. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
     
    2. It is impossible to address issues if we do not know about them!

    Shop Category
     Store Home
     Towing Mirrors
     Sensors
     Cooling System
     Air Conditioning System
     Lamps
     Truck Bed Accessories
     CV Axle Shaft
     Alternator
     Coolant Overflow Tank
     Brake pads
     Steering Shaft
     Windshield Wiper Motor
     Strut Assemblies
     Door Handle
     Wheel Hub Bearing Assembly
     Wheel Adapters
     Window Switch
     Bumpers
     Window Regulator
     Compressor
     Window Visor
     Drive shaft
     CDI BOX
     Brake Caliper
     Strut & Suspension Assemblies
     Radiator
     Other
    Hot Item
    Delivery

    content_src_url

    New List Item
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    For 2019 Honda Civic 1.5L 2016-2019 Honda Civic 2.0L Aluminum Radiator

    Compatibility:

    • 2019 Honda Civic 1.5L
    • 2016-2019 Honda Civic 2.0L

     

    Features:

    -OE design to ensure exact fit, form and function for an easy drop-in installation;

    -Built with high density multi-lowered fins for maximum cooling efficiency;

    -ISO 9001 certified manufacturing plants;

    -Direct Replacement;

    -Improve Cooling Efficiency;

    -100% Leak Tested;

    -Plastic tanks with aluminum core;

    -Built to strict quality control standards;

     

    How to clean radiator:

    • Cleaning Radiator Fins
    1. ​Step 1: Let the Radiator Cool Down
    2. Step 2: Dilute the Cleaning Solution
    3. Step 3: Clean the Radiator Fins With the Solution and Soft-Bristled Brush
    4. Step 4: If Some Radiator Fins Get Bent, Straighten With a Flathead Screwdriver
    5. Step 5: Rinse the Radiator Fins With a Hose
    6. Step 6: Let the Radiator Fins Air Dry
    • Flushing a Radiator
    1. ​Step 1: Let the Engine Cool Down
    2. Step 2: Put a Catch Pan or Bucket Underneath the Radiator
    3. Step 3: Drain Out the Coolant
    4. Step 4: Dilute the Flushing Solution
    5. Step 5: Pour the Flushing Solution Into the Radiator
    6. Step 6: Drain Out the Flushing Solution
    7. Step 7: Pour Distilled Water Into the Radiator
    8. Step 8: Refill Coolant Into the Radiator
    9. Step 9: Monitor the Cooling System and Resolve Issues

     

    How to replace the radiator:

    1. Remove the air duct and disconnect the negative battery cable. Take off the air cleaner assembly, and drain the cooling system into a resealable container. Take off the radiator's inlet hose and remove the transmission's cooler lines.
    2. Take off the fan shroud clips on the condenser tubes, and remove the bolts that connect the fan shroud to the condenser bracket. Remove the air deflectors.、
    3. Disconnect the coolant hose from the radiator overflow and take off the radiator support brackets on the fan shroud. Disconnect the electrical connectors on the engine cooling fan motor, and remove the fan motor harness from the fan shroud clips. Remove the fan shroud.
    4. Take off the radiator's outlet hose and disconnect the transaxle oil cooler pipes.
    5. Tile the radiator towards the rear and remove the condenser brackets. Lift the condenser brackets and the mounting tabs and position them out of the way. Lift the radiator carefully out of the engine compartment and install the new radiator.
    6. Reinstall and reconnect the engine components in the reverse order that they were removed.
    7. Fill the new radiator with a mixture of half water and half engine coolant. Start the engine and let it run for a couple of minutes, then turn it off and add more fluids, if necessary. Reattach the negative battery cable.

     

    Note:

    1. Tips

             Engine coolant can be reused if it isn't old or contaminated. However, if you choose not to reuse it, take it to a garage or a hazardous waste facility for proper disposal.

         2.Warnings

            To avoid scalds, wear gloves and protective clothing before changing the radiator, and always be sure the engine is cool before replacing the radiator. Be sure to keep engine coolant in a sealed container out of the reach of children and pets. If any is spilled, clean it up immediately.

     

    Package:

    1pc of brand new radiator



    1.We accept any payment which can be accepted by eBay.
     
    2.Please do check the shipping address. If you want to change the shipping address, please contact us by eBay messages.
     
    3.If you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.
     
    4.Payment must be received within 10 days as auction ended or order might be delayed.
    1. Orders processed within 24 hours of payment verification. (if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
     
    2. The images shown are not the actual item and are for your reference only.
     
    3. Fast shipping: All our packages use USPS First Class/UPS/Fedex... Package Service
     
    4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
    1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
     
    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
     
    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
     
    4. Return shipping is to be paid by the Buyer.
    1. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
     
    2. It is impossible to address issues if we do not know about them!

    hilamps_All rights reserved.