SKU: 1500W-6040TUSB-1+1500W-6040TUSB-2+1500W-TS002USB

Description:

1. This 6040T machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes.

2. It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood. and soft metal, like aluminum, copper and silver to engrave them into 3D/2D works etc.

3. It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin double color plate, PVC foaming board, indentation plates, signs, construction models,
instrument panels, wooden products, etc.

4. The mini router Frame is movable. The machine can connect with computer as other external device such as printer, scanner...

5. With the assist of the ROUTER 6040T, your design idea will be real-time display.

4 Axis Engraving Machine Manual Remote Controller

Description:

Industrial fit for engraving machine controller was designed system

Waterproof design, very durable, anti-dirt, oil spray

Power by USB port

Dimensions: 22 x 8 x 3cm

Please note: this item works with

The usb self-check light, you can type the " scroll" on the keyboard to activate it.

Directional motion control: X+, X-, Y+, Y-, Z+, Z-, A+, A-

Feed rate control: F+, F-

Jog rate: J+, J-

Spindle speed: speed up, slow down

Programming: E-stop, cycle start, spindle on/off, Redo, single step, original point

Package Include

1 * Remote controller

1 * Cable

engraving machine parameters:

X, Y, Z Working Area: 600(Y)*390（X）*120(Z)mm

Outside dimension: 865*680*570mm（L*W*H）

Table size: 770（Y）*490（X）mm

Lathe structure: 6061/6063 Aluminium alloy

Max. Feeding height: ≤100mm

Drive unit:

X axis---1605 Ball Screws

Y axis---1605 Ball Screws

Z axis---1204 Ball Screws

Sliding unit:

X axis---High intensity Chromeplate shaft

Y axis---High intensity Chromeplate shaft

Z axis---High intensity Chromeplate shaft

Stepping motor: 57 two-phase 3A 150N.cm

Spindle motor
1，Water cooled spindle motor can work longer time than air cooled motor.
2，Water cooled spindle motor has higher stability and better concentricity than air cooled motor.

（tips：1. The spindle motor must connect with the VFD.

2. It cannot directly connect with the supply voltage (AC110V).

3. Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.

Outside dimension: 65*158mm

Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket

VOLTS, current, power: AC110V, 60Hz, 5A, 1.5 KW VFD
Spindle motor: 1.5 KW Water Cooled

Spindle speed: 24000 rpm

Max working frequency: 400Hz

Principal axis collet: ER11collet, Standard configuration :6mm

Nut Model: ER11-A

Cooling: Water-cooling

Speed mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM

Lubrication way: lubricated by high grease

Repeat accuracy: 0.05mm

Spindle precision: radial beat acuities 0.03mm

Carving Instructions: G code / TAB files / nc file / NCC files

Communication interface: through USB connection with computer

Working Speed: 50-1500mm / min(different material with different speed settings)
Maximum Idle speed: 0-1500mm/min

Control box parameters:
Operating Voltage: AC110V

Control unit: Toroidal transformer + PWM power supply module + TB6560 stepping motor drive

Computer connection: USB port

Command code: G code

Protection: Emergency stop button

Feature:

1. The NEW 1.5KW water-cooled VFD is available operating for long time,which can reinforced
the processing abilty of the machine and can be used to process aluminum alloy and hard wood.

2. water cooling spindle works more stable and durable.

3. High quality accurate ball Screws drive make the engrving more precision. Anti-blackflash, high precision, long life circle.

How to USE:

1. Assembling and locating the engrving machine on steady desk well.

2. Make sure that your computer has a 25pin USB port output.

3. Place the contral box in a ventilated dry place where there is no dust,no moisture

4. Connecting the control box with the engrving machine and you computer and make sure the plug will not come off.

5. Correctly connect the machine with the controller. Don't suspended the cable which connect the Spindle motor with axis(X,Y,Z,A).Otherwise. It will damage the driver of the controller.

6. Correctly instal the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well.

7. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine.

10. You can enjoy making you dream with using our engrving machine now.

Pease note: We only sell engraver machine not include the software. If you need full version software, please buy it at official web.