The tool you reach for once your main detector has told you something is there. You have the hole dug and the signal is somewhere in the loose soil — this finds it in seconds instead of sieving through by hand. The whole front section detects, not just the tip, so you can sweep the hole wall, the spoil heap or the plug without having to point it precisely. It tells you two ways at once, a tone and a vibration, and both get stronger as you close in on the target, so it works just as well with headphones on or in a noisy spot. A bright LED in the nose lights the hole when you are digging at dusk. No tuning, no settings, no ground balancing — switch it on and go. 22cm long, light enough to hold all day, and it comes with a lanyard and a belt sleeve so it is not rolling around in your bag.
| Finds the Target in the Hole Seconds instead of sieving by hand. |
360 Degree Detection Sweep the hole wall, not just point the tip. |
| Tone and Vibration Together Works with headphones or in noise. |
Signal Gets Stronger As You Close In Tells you how near you are. |
| Built-In LED Light For digging at dusk. |
Lanyard and Belt Sleeve Included Stays on your belt, not in the mud. |
| Type | Handheld Pinpointer / Probe |
| Detection Range | Around 5cm |
| Detection Area | 360 degrees around the probe |
| Alarm | Audio Tone and Vibration |
| Light | Built-In LED |
| Size | 22 x 3.8 x 3cm |
| Tuning | None required |
| 1 | Fit a fresh 9V alkaline battery. A weak battery is the most common cause of a unit switching on and off or behaving oddly |
| 2 | Switch on away from any metal |
| 3 | Sweep the probe slowly around the hole, the spoil heap and the dug plug |
| 4 | The tone and vibration get stronger as you get closer to the target |
| 5 | Use the LED to light the hole when working in poor light |
| 6 | Wipe the probe clean after use and switch off to save the battery |