What Is Edge Banding
Edge banding?is a thin material used to seal the and raw edges of?plywood.
Heat sensitive adhesive on side is applied to the board while the other side acts as a barrier against dirt and moisture.
Edgebanding?is mainly done to cover?plywood sides?in order to match a?cabinet’s finished look, but it also protects the?inner plywood?from possibly warping.

Overview:?Benefits And Edge Banding Materials
Edge banding is a strip of wood veneer with heat sensitive adhesive on side.
With a roll of wood veneer edge banding and a few simple tools, you can cover raw plywood edges so the plywood is nearly indistinguishable from solid wood.
Iron-on edge banding is wood veneer with hot-melt adhesive preapplied to the back.
You simply hold the edge banding in place, run over it with a household iron to heat the adhesive, let it cool and trim the edges flush.

How To Use: (With Hot Melt Adhesive)
Tip 1:?Clean up the edges
Tip 2:?Iron on the edge banding
Tip 3:?Press it while it's hot
Tip 4:?Slice off the ends
Tip 5:?Use a trimmer on edges
Tip 6:?Modify your trimmer
Tip 7:?Don't leave a splice where it'll show
Tip 8:?Touch up with a sanding block

Colour: White
Size: 3/4 inch x 25ft
Thickness: 0.6mm
Material: Melamine
Quantity: 1 Roll

√【BRAND 】- is a company specialized in Edge banding.
√【HIGH QUALITY】- The edge banding is made of high quality melamine material, which is durable and elastic, with a smooth surface and not easy to be dirty.When you repair Laminate and Cabinets, Melamine Edge banding will be your first choice.
√【UPGRADE DESIGN】- The size of Edge Banding is 3/4 inch x 25ft, and the thickness is 0.6mm, It's suitable for your daily needs. Edge Banding is a strip of wood veneer with heat melt adhesive pre-applied to the back. You simply hold the edge banding in place, then run over it with a heated iron. After cooling, please press it with your hand and trim off the sides with the Utility , 0.6mm thickness can let you easy to do.
√【WIDELY USED】- Our design is high quality & fashionable, This Edge Banding were doing market research which is matching most favorites. Melamine Edge banding is a thin material used to seal the sides, such as plywood, particle board or MDF, increasing durability and a new look. It can update your desk, cabinet, DIY and the other furniture, the edging will give a smooth and clean surface to it.
√【】- Any defective problem happened on our edge banding, we promise to send you a same new veneer edging for replace or . Have any questions and suggestions? Just by . Our team is always be here to help you solving the problem within 24 hours.