============Condition: Brand New=========
Specifications
Transmission: Wifi digital signal
Video compression: H.264 high profile
Signal strength: 10M
Operating temperature: -20 + ~ + 70 °C
Storage temperature: -30 + ~ + 80
Working humidity: 90% RH
Receiver: IOS or Android devices
Senor: CMOS
Image pixels: megapixels
Viewing angle: 120 ° ~ 175 °
Minimum lighting: 0.1Lu / F2.0
Power supply: DC12V
Night View distance: 5-10M
Waterproof level: IP67
Fixed type: license plate light fixed
Product included
1 x WIFI camera
1 x User manual
1 x Power cable
2 x Screws
Product installation (very important, please read carefully)
1. First, turn off the on-board power supply. When the power cord of the camera is not properIyconnected, do not power on it.
2.Determine the type of camera and select the installation position method
Rear view product installation method:
Methods 1：Red power cord fuse box ACC power supply 12V+ positive position, black power cord fuse box negative GND wire harness, start the vehicle to use.
Method 2: Wire the power cord,(red 12V positive pole, black negative pole) plug in the cigarette lighter, yellow is the reverse trigger line can not connect, press the switch can be used.
Side view product installation method：
Methods 1: Connect the power cordadjust thecamera Angle, plug in the cigarette lighter and press the switch
Method 2; Cut open the cigarette lighter switch position of the wire, red and black two wire. Red power cord is connected to ACC power supply 12V+ positive position of vehicle fuse box. Black power cord is connected to negative GND wire harness of vehicle, which can be used when starting the vehicle
Troubleshooting
1. No image
Make sure the camera Is connected correctIyopen the WIFI list on your phone, and see if you can find theW-Car hotspot generated by the camera
2. Background operation
You need to turn on the phone Settings and set it to run in the background
3. Video delays kenton
Check if the antenna is shielded by metal and the antenna faces the cockpit