Detail

Specifications:

--Plug Type: 9005 + H11, High-Low Beam

--Power：150W

--Lumens：72000LM

--Operating Voltage: DC 9-32V(fit 12V,24V vehicles)

--Color Temperature: Pure White 6500K

--Operating Temperature: -40 - +105°C

--Lifespan: 50,000+ working hours

--IP Rate: IP68

--LED type: CSP LEDs

--Beam Angle: 360°

--Number of Bulbs: 4

--Material: Aviation 6063 aluminum profile

--Usage: headlight

Advantage:

* LED lights than traditional halogen energy, more power.

* Xenon lamp brightness and proximity , but the LED lights light up without delay, to enhance road safety. Instant start no strong currents impact , effectively protecting the car comes with a battery , improving battery life of more than 30%.

* Fast cooling , the appearance of the most advanced design , thermal structure ingenious and reasonable.

* Fewer Components damaged, repair the probability is very low , compared with HID ballast repair lower than 80% .

* LED car headlights simple structure, fewer parts than xenon lamps, significantly lower than the xenon lamp failure rates !

* Automotive LED headlamps color temperature balancing. The Xenon bulbs in the same color to clear , about 6500K.

* Easy Installation: you could done within 10 minutes.

Tips: Insert into the right slot-clockwise, rotate-led chips face 3 o’ clock and 9 o’ clock direction.

Package Included:

2 x 9005(HB3) LED Headlights Bulbs

2 x H11(H9/H8) LED Headlights Bulbs

1 x Manual

Warm Tips：

1.The compatible vehicle list shows only partial cars due to the ebay limits, if your car plug is same with this bulb, the item will fit your car.

2.If you are not sure about the bulb size, please send us your vehicles' make/model/year via ebay message to confirm with us before purchasing.

3.If you have a decoding problem or any other problems, please contact us first, we will help you with it.

Install Caution：

1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the light when adjusting the bulb.