• Feature
  •  
    • This part may also be known as: Driveshaft Propeller Shaft Assembly
    • Top performance For long service life
    • 100% tested For reliability and performance.
    • High Qaulity Steel construction softens shock to driveline components and tires.
    • High quality after-sales parts
    • Improving traction and lessening breakage.
     
  • Part Number
  •  
  • 52098377, 52098377AB, 52098377AD, 65-9316, 938-079
  •  
  • Fit for
  •  
  • Jeep TJ1998-2002 L6 4.0L Manual 4WD Front  Jeep Wrangler 1997-2002  L6 4.0L Manual 4WD Front
  •  
  • 6 Common Signs of Driveshaft Problems

    • Driveshaft Assembly for Jeep Wrangler 1997-2002,TJ 1998-2002 Manual 4WD Front

    Feature

     

    • This part may also be known as: Driveshaft Propeller Shaft Assembly
    • Top performance For long service life
    • 100% tested For reliability and performance.
    • High Qaulity Steel construction softens shock to driveline components and tires.
    • High quality after-sales parts
    • Improving traction and lessening breakage.

     

    Part Number

     

    52098377, 52098377AB, 52098377AD, 65-9316, 938-079

     

    Fit for

     

    Jeep TJ1998-2002 L6 4.0L Manual 4WD Front
    Jeep Wrangler 1997-2002  L6 4.0L Manual 4WD Front

     

    6 Common Signs of Driveshaft Problems

     

    • Vibrations.An early sign of driveshaft problems is intense vibrations that come from underneath the vehicle.
    • Squeaking Sounds.Squeaking sounds are caused by a couple of driveshaft problems.
    • Clunking Sounds.This will sound like a loud clunk or knock coming from beneath the vehicle.
    • Other Strange Noises.You may also hear scraping or rattling sounds.
    • Movement In the U-Joint.Worn or broken U-joints are a common driveshaft problem.
    • Shuddering While Accelerating.Loose U-joints or bad center bearings within the driveshaft can cause a worrisome shuddering as you accelerate.

     

    Product Installation Procedure

     

    1. Remove the split pin from the hub nut, then crack the hub nut off so that it’s loose, but leave it attached.
    2. Jack the car up, remove the front wheels and take off the brake calipers. Remove the hub nut completely. 
    3. Undo the nut onto the lower ball joint and break the hub assembly and the lower arm apart. Pull the hub away from the drive shaft, freeing the outermost end.
    4. Remove the drive shaft end from the gearbox.
    5. Fit the new drive shaft. Make sure you tighten the hub nuts up to the manufacturer's specified torque.

     

    Note

     

    Our products have a strong adaptation, please confirm your model before buying, according to the model to buy the corresponding accessories.

    If you are not sure about your model, you can send us your VIN code and we will help you confirm whether it is suitable.

    If you have any questions about our products, please contact us.

     


    Item Specifics
    Manufacturer Part Number T17573501CC
    Placement on Vehicle Front
    Brand TCC
    Type Driveshaft
    Transmission Type Manual
    Interchange Part Number 65-9316
    Manufacturer Warranty 1 Year
    Drive Type Array
    Fitment Type Direct Replacement
    Warranty 1 Year
    Other Part Number 938-079, 659316, 938079
    Compatible Makes Jeep
    Model 1998-2002 TJ, 1997-2002 Wrangler
    Engine L6 4.0L
    Note Please contact us to confirm the application before Purchase
    OE/OEM Part Number 52098377, 52098377AB, 52098377AD
    Universal Fitment No
    Universal Fitment No

    Payment

    1.We have multiple payment methods

    Shipping
    1. Orders processed within 24 hours of payment verification.
    2. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
    Returns

    * We only warranty cost of parts. Any installation or other fees are non-refundable.

    Contact Us

    We treat each buyer with a sincere heart, I believe our sincere service , excellent quality of goods will win your trust and support, you may contact us via message and we will reply to you within 24 hours from Monday to Saturday.(Excluding local holidays)

    Shop Category
     Store Home
     sensor
     TRANSMISSION OIL FILTER
     Catalytic Converter
     alternator
     starter
     rack
     drive shaft
     stator
     rectifier
     engine mount
     Parking Sensor
     Fuel Vapor Charcoal Canister
     Other
    Hot Item
    New List Item
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    Driveshaft Assembly for Jeep Wrangler 1997-2002,TJ 1998-2002 Manual 4WD Front

    Feature

     

    • This part may also be known as: Driveshaft Propeller Shaft Assembly
    • Top performance For long service life
    • 100% tested For reliability and performance.
    • High Qaulity Steel construction softens shock to driveline components and tires.
    • High quality after-sales parts
    • Improving traction and lessening breakage.

     

    Part Number

     

    52098377, 52098377AB, 52098377AD, 65-9316, 938-079

     

    Fit for

     

    Jeep TJ1998-2002 L6 4.0L Manual 4WD Front
    Jeep Wrangler 1997-2002  L6 4.0L Manual 4WD Front

     

    6 Common Signs of Driveshaft Problems

     

    • Vibrations.An early sign of driveshaft problems is intense vibrations that come from underneath the vehicle.
    • Squeaking Sounds.Squeaking sounds are caused by a couple of driveshaft problems.
    • Clunking Sounds.This will sound like a loud clunk or knock coming from beneath the vehicle.
    • Other Strange Noises.You may also hear scraping or rattling sounds.
    • Movement In the U-Joint.Worn or broken U-joints are a common driveshaft problem.
    • Shuddering While Accelerating.Loose U-joints or bad center bearings within the driveshaft can cause a worrisome shuddering as you accelerate.

     

    Product Installation Procedure

     

    1. Remove the split pin from the hub nut, then crack the hub nut off so that it’s loose, but leave it attached.
    2. Jack the car up, remove the front wheels and take off the brake calipers. Remove the hub nut completely. 
    3. Undo the nut onto the lower ball joint and break the hub assembly and the lower arm apart. Pull the hub away from the drive shaft, freeing the outermost end.
    4. Remove the drive shaft end from the gearbox.
    5. Fit the new drive shaft. Make sure you tighten the hub nuts up to the manufacturer's specified torque.

     

    Note

     

    Our products have a strong adaptation, please confirm your model before buying, according to the model to buy the corresponding accessories.

    If you are not sure about your model, you can send us your VIN code and we will help you confirm whether it is suitable.

    If you have any questions about our products, please contact us.

     


    Payment

    1.We have multiple payment methods
    Shipping
    1. Orders processed within 24 hours of payment verification.
    2. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
    Returns

    * We only warranty cost of parts. Any installation or other fees are non-refundable.

    Contact Us

    We treat each buyer with a sincere heart, I believe our sincere service , excellent quality of goods will win your trust and support, you may contact us via message and we will reply to you within 24 hours from Monday to Saturday.(Excluding local holidays)


    All rights reserved.