SURPASSHOBBY 17 inch FPV Drone Frame Kit IDF-17 inch 760mm Wheelbase Carbon Fiber Frame 10KG Max Load Capacity B4214-660KV Brushless Motor 17inch Propeller for 17" Drone
17inch FPV Frame Features:
1. 17 inch FPV Frame-The frame is really solid and well balanced, perfect balance between performance and durability.
2. New FPV Racing Drone-Made of high-quality Carbon Fiber,Comes with a tripod, can fly outdoors or indoors in a large space.
3. Easy to assemble, suitable for both beginners and experienced players.
4. The rack can be used in conjunction with 8-12S/5 series motors and 90A/110A ESC.
5. Unique frame shock absorption design, less vibration, safe and stable electronic system operating environment.
H743 Flight Stack Features:
1. Open-source Betafight Flight Controller.
2. High Configuration: STM32H743VGT6 master, Dual-ICM42688 gyroscope, BMP280 barometer.
3. Supports connectivityto all DJl Air Units.
4. lt offers 7 available UART ports, 12 PWM outputs, I2C and an OSD.
5. Built-in OSD module, one-step parameterization.
6. Standard sockets and pads all lead out, convenient for users with different needs.
7.
ESC Equipped with a TVS transient suppression diode onboard, it better
absorbs surge voltage, providing enhanced protection for the ESC.
8. ESC adopts MOS with high cost performance, which hasgood current resistance and long durability, good stability.
9. High-performance processor can support Dshot300/600 protocolat, and the accelerator is smooth and powerful.
10. H743 FC Support Beataflight firmware, ESC Support BlueJay,bidirectional DSHOT.
11. Supports multiple signal protocols (DSM/SBUS/TBSCrossfire/ELRS).
12. Support multiple open source firmware (ArduPilot, Betaflight).
Motor Features:
1. 48sh rotor ndfeb tiles lightweight high-strength holecore steel shaft
2. M5/M6 shaft compatible with most propellers. Precision engineered for maximum energy conversion.
3. FPV brushless motor provides the most incredible power and thrust in the lightest weight. Give you a more satisfied experience with your model.
4. The detachable design is convenientfor cleaning the motor; the porous airoutlet structure design of the frontcover effectively improves the heatdissipation performance of the motor.
5. The motor suitable for FPV RC drone.
IDF-17inch FPV Frame Specifications: Model: IDF-17 inch(Coarse tube with tripod)
Max load capacity: More than 10kg
Wheelbase: 760MM
Size: 580MM*580MM*35MM
Plate thickness: 2.0MM(carbon fiber)
Weight:700-10g
Arm tube: 295*Ф17*1.5mm
Distance between upper and lower boards: 30MM
Camera installation spacing: 19MM
Installation hole spacing for image transmission: 30.5MM/25.5MM/20MM
Flight control installation hole spacing: 30.5MM
Motor installation hole spacing: 19MM-25MM-30MM
Motor: 8-12S/5 Series motor
ESC: 90A/110A
Battery: 8S/12000-25000mAh
H743 Flight Control Specifications:
Master chip: STM32H743VGT6
Gyroscope: Dual-ICM42688
Battery: 3-12S
USB: Type-C
Barometer: BMP280
OSD chip: AT7456E
Bluetooth: Not Supported
RSSI: Support,marked as RSSI
Support flight control firmware: Beataflight
Firmware Name: DAKEFPVH743
Installation hole position: 30.5x30.5mm/M4
Size: 36mm x36mx8m
Weight: Bare board 8g
PWM outputs: 12
UART ports: 7
DSM protocol: not supported
INVA: Not supported
H743: Cannot support CAN
H743Pro: Supports CAN
Flash memory: 16MB
80A 4IN1 ESC Specifications:
MCU: EFM8BB21F16G-C-QFN20R
Specifi cations: 80A
Program: BlueJay
MOS: 5C430
Continlous crent: 80AX4
Transient curent: 85A-10S
TVS protection diode: YES
Electrolytic capacitor: 4700uF Low ESR Capacitor
Motor protocol: Dshot300/600
Battery imput: 3-8S Lipo
Ameter: support
Power Output: VBAT
Installation hole position: 30.5x30.5mm/M4
Size: Length 60x56x7mm
Weight: Bare board 30g
Package contents:
1 * 17 inch FPV Frame
1 * H743 flight controller
1 * 80A brushless ESC
4 * B4214-660KV motor
4 * propeller blades
Note:
Only the above package content, other products are not included.
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3mm deviation.Thanks!
Before purchase:
1.All the goods are ready stock, we will arrange the shipment at once if we receive the order.
2.Please read the item description, if you have any question, do not hesitate to contact us.
3.No warranty,if you receive a defect item,please contact us at once with item picture.
4.Use the vouchers for more saving.
After purchase:
1.If you are satisfied,please express your use feeling.
2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems. If you receive a defect item,please contact us at once with item picture or video.