Introducing the GameMax Prism, unique
design and exceptional functionality, these are the characteristics
that GameMax have chosen to define the Prism. The Prism has a striking
front panel with a triangular ARGB infinity mirror effect results in an
aesthetically appealing chassis.
This stylish gaming case does not stop there with eye-catching angular
aesthetics complete with cut-outs help the Prism to reach it’s full
potential. Three pre-installed 120mm fans mounted on the top and rear
of the chassis which is also equipped with sleek infinity effects
illuminates the spacious interior of this exquisite Mid-Tower. On top
of the three pre-installed fans there is room for another five to fully
populate the Prism and three water cooling locations with a 360mm
radiator the largest that can be installed this case is full of cooling
capability.
Stand out with the touch of Infinity, the circular-shaped infinity
mirrors at the centre of the fans create a mesmerising LED lighting
display with their multi-layer effect. They not only look fantastic but
also ensure all components are taken care of for when it comes to
keeping temperatures balanced & conditions optimised for a peak
performance.
Your hardware is on show thanks to the tempered glass side panel it
leaves little hidden, moving onto the top of the case the I/O panel
provides USB3.0 and USB2.0 connections & inside is a PWM ARGB hub
with LED lighting controls with access to approximately 40 LED modes or
16.8 million colours using a compatible addressable RGB MB.
Measuring 46cm in height, the all-black interior & full PSU shroud
add to the smooth and unobtrusive look. It can fit a graphics card up
to 32.5cm & behind the MB & PSU shroud up to 3 x 2.5” / 2 x
3.5” drives. Top & bottom removable dust filters help keep your rig
clean, with room in the shroud for an ATX PSU up to 165mm with cables
easily hidden from view.
Overall the GameMax Prism distinguish itself with its state of the art
yet functional design.
Key Features
Modern Aesthetics - Triangular shaped cut-out with infinity mirror
effect and ARGB lighting, the infinity mirror effect set on the front
panel through the tempered glass provides users with a luminous visual
experience. The front panel looks sharp and has the edge with a high
airflow front panel design maximises cooling performance.
Stylish Cooling - Stand out with the three PWM fans included, mounted
on the top and rear of the Prism. The ARGB infinity mirror plus cooling
fans can be controlled via connection to your Motherboards 3-Pin 5VDG
or via the I/O Panel. The Prism uses the best infinity fans, these are
three-sided infinity ARGB fans, the touch of infinity, the
circular-shaped infinity mirror at the centre of the fan is created to
have multiple layers spaced approximately 0.5mm apart. The multi-layer
effect creates a mesmerising LED lighting display.
Extra Infinity - Surrounding infinity trims are located on both sides
of the frame. The geometric shape of the infinity mirror follows the
inner-ring and outer-ring ARGB lighting that creates a 3D indented look.
Side Frame ARGB - The ultimate ARGB fan with an inner and outer ring
has two embedded LED lights on both sides of the fan blade.
Fan Controller Included - A PWM hub is included inside the Prism which
allows you to add up to 6 case fans and is powered directly from your
power supply via SATA. You can access it using the LED button and it's
connected to the Motherboard using a single cable - you can setup
without any additional cables.
PWM Fan Control - The hub can be connected to the CPU fan interface on
your chosen Motherboard to access temperature readings. An increased
CPU temperature increases the fan speed automatically and swiftly cools
the system down. Conversely when the CPU temperature decreases the fan
automatically slows reducing the overall noise.
Motherboard Software - The ARGB lighting effects can be synced through
the Motherboard which supports ARGB function, 5V 3-Pin Addressable RGB
header, including ASUS AURA, MSI Mystic Light, Gigabyte Fusion 2.0
& ASRock. Customise the look with endless possibilities with 16.7
million static modes and 12 pre-set lighting effects.
VDG Connector Included - A 3pin VDG connector is included which is
intended for use with older Gigabyte and Aorus Motherboards.
Tempered Glass Panel - The tempered glass side panel offers an
unobstructed view of the interior and shows off your system build. It
allows users to enjoy a panoramic view of the lightning.
Hardware Orientated - The interior comes entirely in black and with a
full-length PSU shroud that only adds to the stylish and unobstructive
look. A dedicated PSU Shroud that is made with solid steel panelling
that perfectly covers the cables, showcases the PSU specs and contains
a hard drive mount. Behind the shroud is where users will find space
for one 3.5” HDD and two 2.5” SSDs can be installed next to the
Motherboard. Located on the top of the PSU shroud there is space for
one 3.5” HDD or one 2.5” SSD (Only can be installed if no cooling fans
are installed). The Motherboard tray and PSU shroud both offer a number
of openings for optimum cable management with up to 20mm cable
management space. Underneath the case is a removable dust filter
suitable for a full sized ATX PSU up to 165mm long.
ATX Housing - Standing at 460mm high, 200mm wide and 373mm deep the
Prism is compatible with a wide range of components, with 325mm of
clearance for GPUs and it can facilitate CPU coolers up to 165mm tall.
Additionally the I/O panel located at the front possesses one USB3.0
& two USB2.0 ports, HD-Audio, Mic & LED / Reset button. There
are seven expansion slots on the rear panel for PCIe devices.
Specifications
Chassis Dimensions (Excluding Fascia / Panels): (W) 200 x (H) 445 x (D)
330mm
Water Cooling Support:
Front Supported Radiator(s): 120mm, 240mm and 360mm
Top Supported Radiator(s): 120mm and 240mm
Rear Supported Radiator(s): 120mm
3 x 120mm Fans Included:
Fan Powered Via: 4pin PWM
Fan LEDs Powered Via: 3pin AURA
Fan Controller Support:
Fan Controller Included: Yes
Fan Controller Power Via: SATA Connector
LED Controller: Yes
Fan Power Connector: 3 or 4pin
LED Power Connector: 3pin AURA
Fan Control Via: LED Button (Reset Switch) or MB Sync
Supported Qty of Fans (Max.): 6
Supported Qty of LEDs (Max.): 6
Additional Chassis Specifications:
Motherboard Max. Size: (W) 310 x (D) 250mm
PSU Max. Length: 165mm
Dust Filters: 2 x Top & Bottom
Packaging Type: EPE Foam
Packaging Thickness: 36.70mm
Case Specifications
Form Factor: Midi Tower
Motherboard Support: ATX, Micro ATX, Mini ITX
PSU Support: Standard ATX
PSU Location: Bottom
Gaming Case: Yes
Water Cooling: Water Cooling Ready!
Supported Radiator Size: 360mm
Supported Radiator Positions: Front, Top
Body Material: 0.5mmSPCC
Front Bezel Material: ABS & Tempered Glass With Infinity Mirror
Side Panel: Tempered Glass
Internal Cable Management Depth: 20mm
External Bays:
Internal Bays: 2 x 3.5” Internal
3 x 2.5” Internal
Drive Bay Notes: 1 x 2.5" Shared with 3.5"
Expansion Slots: 7 x Full Size
Cooling Front: Space For 3 x 120mm Fans
Cooling Top: Space For 2 x 120mm Fans (2 x 120mm PWM ARGB Infinity Fans
Included)
Cooling Rear: Space For 1 x 120mm Fan (1 x 120mm PWM ARGB Infinity Fan
Included)
Cooling Side: None
Cooling Bottom: Space For 2 x 120mm Fans (On PSU Shroud)
Fan Controllers: 1 Fan Controllers, controlling up to
6 fans in total
IO Ports: 1 x USB 3.0
2 x USB 2.0
1 x HD Audio
1 x Microphone
GPU Max Length: 325mm
CPU Cooler Maximum Height: 165mm
Front Bezel Colour: Black
Body Colour: Black
System Cabinet Features:
PSU Included: No