TheAutoHubCA

WHY CHOOSE US

Street Coilovers Suspension for Honda Accord CW1 2008-2015 Acura TSX 2009-2015

Description



 

Introduction
MXR-SLC is based on MXR-SNA coil-overs, which are also height adjustable. They are also made for street use, but the 24-level rebound damping control allows you the ability to perfectly dial in your coil-over setup. You will experience better ride quality in all road conditions.

 

 

Application

For Honda Acoord VIII Sedan (USA) CP2/CP3 2008-2012
For Acura TSX Sedan (USA) CU2 2009-2014, excluding Special Edition
For Honda Accord VIII Coupe CS1\CS2 (USA) 2008-2012
For Acura TSX Sport Wagon(USA) 2011-2013
For Honda Accord VIII Sedan ((EU/JPN) CU1 2008-2013
For Honda Accord VIII Type-S Sedan ((EU/JPN) CU2 2008-2013
For Honda Accord Tourer Wagon ((EU/JPN) CW1/CW2/CW3  2008-2013
For Honda Euro Sedan (Australia& New Zealand) CU1/CU2 2008-2015

Note: For Accord trim levels EX, EX-L, LX-S, and For Acura TSX Sedan & Sport Wagon have strut tower bar mounting points.
For Accord trim levels LX, SE, and LX-P have reserved factory mounting points.

 

 

 

Specifications
Top mounts: Standard rubber top mount front and rear
Damping: 24 levels rebound damping adjustable
Shock type: Twin tube
Adjustable height: Yes lowering 1'' to 3''
Adjustable camber plate: No
Spring preload: 7-10 mm
Spring rate Front: 10 kg/mm (560 lbs/in)
Spring rate Rear: 7 kg/mm (392 lbs/in)
Color: Red
 
 
 

Package included
Complete coilovers 2 front and 2 rear as shown in the picture

 


Dimension
Size: 63*51*21 cm
Weight: 22.88 kg

 

 
 
 

Features

1. Lowered height adjustment from 1" - 3" (depends on vehicle models) which allows a lower center of gravity and also adds a more aggressive stance 
2.24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coil-overs system. For nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff.
3. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent
4. Adjustable Camber Plate and Pillow ball top mount for sharpening steering response. ( for some models)
5. CNC machined Aluminum  top mounts and lockers-- - excellent strength, and save weight
6. Heavy Duty Steel Lower Mounts--- Highly Durable & Reliable
7. High tensile spring---  600,000 times continuously test to assure its high tensile strength.
8. All inserts come with fitted long rubber boots--- To protect the damper better and be durable.
9. Twin-Tube structure ---provides excellent handling & control characteristics for most driving conditions
10. Corrosion Finish - Anodized Aluminum And Powder Coated Carbon Steel Parts
 
 
 
 
Note
1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen. 
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.

 

 

Notice

* Professional installation & alignment suggested.
* Please check our store for other auto parts you may be interested in.