5V/3V 6mm Point  

● Parameters:

Wavelength: 650NM

Power: 5MW

Outer diameter: 6mm

Emission power: 150mW standard

Quasi size: φ 6 * 10.5

Working life: over 1000 hours

Spot mode: Point shaped spot, continuous output

Laser wavelength: 650nm (Red)

Output power:<5mw

Power supply voltage: 5VDC

Working current:<40mA

Working temperature: -36 ° C~65 ° C

Storage temperature: -36 ° C~65 ° C

Photoelectric size: The light point at 15 meters is φ 1mm~ φ 15mm

This laser head consists of three parts: a light-emitting tube core, a condensing lens, and a copper adjustable sleeve. When sent to the user, these three parts have been assembled, the lens focal length has been adjusted, and it has been glued with strong adhesive. The user can work by connecting to a 5V DC power supply.

Description:

1. Pay attention to the safety of the laser battery and prevent accidents such as short circuit combustion or battery explosion caused by others disassembling the battery. Pay special attention not to look into people's eyes when using.

2. The emission principle and the particularity of the production process of the laser determine that the laser has the characteristics that ordinary light does not have: good monochromaticity, good coherence, good directivity, and high brightness.

Application:

• Mainly used for laser toys, various levels, ground wires, etc.

• Making an electronic pointer pen: During the teacher's lecture, use a laser projection point to encourage students to observe and think.

• Electronic level ruler: Let the motor drive the bald head to rotate or twist, projecting it into a straight line on the wall, for horizontal reference when decorating or posting New Year pictures.

• Micro LCD projection: Remove the condenser and allow the laser to pass through the controllable LCD screen, resulting in a clear projection on the wall.

• Remote laser monitor: irradiate the laser on the glass of the room being eavesdropped, then receive the laser beam reflected back from the glass, detect the vibration of the glass, and restore the sound of the room.

• Remote light control anti-theft alarm: a protective zone is formed by installing a laser emission tube and a photoresistor on one corner of the fish pond or watermelon field to be protected, and installing reverse mirrors on the other three corners.

• Remote laser wireless communication: By using a pair of laser transceiver devices facing each other on two distant rooftops, the serial communication protocol of a microcontroller can be used to send and receive files, and even connect to the internet.

Attention: Parallel connection of ordinary level modules may result in brightness differences, even for industrial level modules, there may be brightness differences, but the difference is only small. Each laser head is individually adjusted with a series resistor. If the laser head needs to be lit for a long time, please increase the current limiting resistor appropriately.

9mm Line / Point / Cross

Parameters:

Transmission power: 5mW

Working life: over 1000 hours

Spot mode: cross/line/dot, continuous output

Laser wavelength: 650nm

Power: 50mW

Voltage: 3V

Current:<20mA

Working temperature: -36 ° C~65 ° C

Storage temperature: 0-30 ° C

External dimensions: φ 9 * 21.6mm

Application:

• Mainly used for laser toys, various levels, ground wires, etc.

• Making an electronic pointer pen: During the teacher's lecture, use a laser projection point to encourage students to observe and think.

• Electronic level ruler: Let the motor drive the bald head to rotate or twist, projecting it into a straight line on the wall, for horizontal reference when decorating or posting New Year pictures.

• Micro LCD projection: Remove the condenser and allow the laser to pass through the controllable LCD screen, resulting in a clear projection on the wall.

• Remote laser monitor: irradiate the laser on the glass of the room being eavesdropped, then receive the laser beam reflected back from the glass, detect the vibration of the glass, and restore the sound of the room.

• Remote light control anti-theft alarm: a protective zone is formed by installing a laser emission tube and a photoresistor on one corner of the fish pond or watermelon field to be protected, and installing reverse mirrors on the other three corners.

• Remote laser wireless communication: By using a pair of laser transceiver devices facing each other on two distant rooftops, the serial communication protocol of a microcontroller can be used to send and receive files, and even connect to the internet.

12mm Line / Point / Cross

Adjustable focal length of 5mW red spot linear laser tube laser head module

Equipped with a drive board for direct power supply

Parameters:

Output: Red dots/straight lines/crosses (650nm)

Size: Φ 12.0x35mm

Line length: approximately 135mm

Voltage: 3.0V-5V

Current: 40mA (maximum)

Purpose: Industrial positioning

Use of Red Light Module:

1. Can be used for positioning of sights;

2. Can be used as a laser testing tool;

3. Can be used for concentricity positioning;

4. Can be used for positioning medical equipment;

5. Can be used to make signal equipment;

6. Taoyou backup products that love making small products themselves or using them for experimental teaching.

The Use of Red Light Modules:

1. Can be used for positioning of sights

2. Can be used for laser testing tools

3. Can be used for concentricity positioning

4. Can be used for medical device positioning

5. Can be used to make signal equipment

6. Make small products or alternative materials for experimental teaching by yourself.

Precautions for Use:

1. The laser should never be directed towards one's own or others' eyes at any time, as there is a possibility of mistakenly turning on the laser even when it is turned off.

2. The laser cannot shine on any reflective or smooth surface. The laser has excellent reflectivity, and when it shines on the reflective surface, it will produce reflection. If it happens to hit the eyes of a person, it can cause injury.

3. The laser is not a toy and should not be used by children, individuals with intellectual disabilities, or those who are not familiar with the characteristics of the laser. In such cases, it can easily cause harm.

4. When using a laser, special goggles should be worn, which is particularly important for invisible lasers.

5. The laser should not be directed towards vehicles, airplanes, or other vehicles with passengers.

6. Pay attention to the safety of the laser battery to prevent accidents such as short circuit combustion or battery explosion caused by others disassembling the battery.