Time & Labor Saving: Goat Milking Machine can save time and labor in milking goats/Nubian nanny, especially for small-scale farmers and hobbyists
Comprehensive Goat Supplies: Goat milking machine comes with a comprehensive set of goat supplies, including a stainless steel canister, 2 teat cups and a centrifugal negative pressure air pump, a complete kit that can meet all the milking needs of small-scale goat farmers and hobbyists
Equipped with a quiet pump, this goat milker has gentle suction that doesn’t make your goat uncomfortable
A full charge takes 2 hours. Can be used continuously for 1 hour. 5 speed adjustable suction
Note:Make sure the canister is sealed good for suction before milking.This equipment uses the principle of negative pressure to pump milk, and the joint of the bottle cap needs to be sealed and tight
Specifications:
Material: Stainless Steel
Color: As picture
Capacity of the bottle: 2L
Working voltage: 6v
Charging voltage: 5v
Rated power: 2.2w
Battery :3.7v700ma lithium polymer battery
Type: For Sheep
Installation steps:
1, Close the bottle cap, can not leak;
2. Insert the tube into the quick connector and press tightly. If you need to pull the tube, press the blue plastic ring and then pull it out.
3. Connect the pumping tube/lining and press tightly;
4, Plug in the negative pressure gun, long press the power switch for 2 seconds to switch the machine, when the green light can work;
Instructions for use
Before pumping milk, squeeze out a little goat's milk with your hand, and then massage the breast of the sheep, so that the milk effect is better. When pumping milk, connect the bottle with the negative pressure gun and then open it. Place the nipple on the goat's milk head and stop for 5 to 10 seconds. If the sheep appears slow milk and can not draw milk/suction is not clean phenomenon, please massage the sheep udder, after a few days of use, the sheep can adapt.
Reminder:
1. Please keep the motor away from water
2. Do not fill the bottle with too much milk each time.