CF-E130N Outdoor Mini Wireless WIFI Extender Repeater AP 2.4G 300M Outdoor CPE Router WiFi Bridge Access Point AP Router Bridge


Instructions for installation steps of all CPEs:


Feature:

1.This cpe router produce 2.4G 300Mbps, Long Range WiFi Extender Outdoor Wireless Bridge CPE with Wifi indicator
suitable check wifi strength
2.Build in 9dBi MIMO panel antenna(embedded) ,High Gain Antenna for More Range
3.Waterproof/dust proof/lighting protection; Operating Temperature: -30℃-55℃ Storage Temp: -40℃-70℃
4.1*10/100Mbps WAN/LAN RJ45 Ethernet Port
5.Qualcomm QCA9533 650Mhz Grade CPU, RAM:64MB FLASH:8MB; High quality chipset make cpe stable tranmission

Specification:

2.Model Number:CF-E130N
3. Qualcomm QCA9533 650Mhz CPU
4. 9dbi orientation Antenna
5. IEEE802.11b/g/n
6. 300Mbps Transmission Rate
7. 1*10/100Mbps WAN/LAN RJ45 Ethernet port  1*Reset button

Suggestion:

The distance "1-2KM" mean 2pcs CPE based on point to point bridge mode.

There are many factors that affect distance, such as obstacles
(trees, walls, buildings, trucks, etc.), raw network signals, etc


If you want the good signal, we suggest you buy 2pcs!


Package included :

CF-E130N CPE *1
Poe Adapter*1
Quick install guide *1
Stainless Steel Ring *2


 300Mbps Outdoor CPE   2.4Ghz Frequency /1KM Stable Transmission 

New Generation monitoring CPE      IP65 Available     Easy to install  Convenient

Easy to set     Poe Power  Supply  Flexible  

Low Power   Energy Saving     SSID Hiding  High Security

Qualcomm chipset  Excellent performance    Auto Channel   Selection 

Stable transmission

High definition quality

CPE work in the 2.4Ghz Band , the transmission rate reach to 300Mbps , Ensure Monitoring image quality is stable , clear and not dropped

Easy to install

No need install tools, supports pole monuted and wall mounted ,convenient and flexible


Signal tracking & Precise Positioning

The CPE comes with signal indicator , users can adjust the angle of the CPE acceroding to the signal strangeth , easy to achieve high quality of long-range wireless transmission effect.

Unafraid of outdoor harsh environment

Poressional outdoor engineering plastic shell, strict silk stitching, Dustroof , waterproof, adapter to bad weather such as wind , frost, rain .


Anti-interference Broadband

Support 2.3-2.7Ghz broadband, support more channel optional , significantly reduced co-channel signal interference, data, transfer is smooth and will not be loost.

Qualcomm chipset, quality Assurance

Adopt qualicomm QCA9531 650Mhz high frequency chipset, which improve the CPU Performance and reduce power consumption (stablity has been tested by engineering users)

Powerfl Hardware configuration Chipset   Qualcomm 650Mhz Chipset       Antenna High gain directional antenna

RAM   64M DDR        FLASH  8M Flash    RF  19dbm RF Transmmit power   Boot  Low temperature working module

Poe Power Supply  

9-24V 0.5A Poe Power Supply, Specification wiring  reduce networking cost

No external power supply required


Just one network cable Safe simple and convient

Hide SSID

Refuse other people to get free wifi

wireless CPE support SSID broadcast hide, can easy solve the troubles of network security and ensure the engineering stablity.

Connecting application diagram

point to point connection diagram

Multiple cameras connecting way 1: connect the camera to the switch ,then connect with CPE . It will transmit the date through two CPE

Multiple cameras connecting way 2: if Cameras are far away from each other , configure each camera with two CPEs, The control center connects CPE with AP mode via switch, then connect with DVR

Point to Muti-point connection Diagram

If the angle of cameras and monitor center is less than 60 degree , there can conside one point to multi point connection.it can reduct CPEs with the transmitting mode , which can save project cost a lot. Please pay attention that it has to meet the angle and Broadband requirement.

In wireless monitoring transmission, we suggest you to use above way to do connection,please pay attention the transmission angle for the device is 60 degree.



rtQ&A
Q1.How long the range of the Antenna  ?

A:This is a directional Antenna , For no obstacles environment 2pcs Point to Point can reach 1KM


Q2.How Many piece included in the package ?

A:There have 2 choices, when you make order it will show 1pcs or 2pcs, If you want to reach long distance and better signal ,we suggest that you choose 2pcs,(Wifi signal is affected by many factors,such as trees, walls, buildings, trucks, etc., raw network signals)


Q3.Does it work as a WiFi repeater?

A:The Antenna support AP/Router/Repeater/Bridge mode can set as repeater mode , just repeater mode will have signal loss , generally we suggest set 1pcs connected with router by network cable as AP mode and another 1pcs to receive the signal from the fist one set as bridge mode.


Q4.If use 1pcs can reach 300m?

A: If just use 1pcs this need depond on the real using environment ,Because just use 1pcs ,then can not set as bridge mode , the range will have limited,wifi signal be effected by many factors,trees,walls , trucks ...

Also if the receive wifi device with low power ,also can not have a good range.


Q5.If the antenna can be connected with 48V poe switch?

A: The Antenna can not connected with 48V poe switch ,If need connected with poe switch please connected with 9-24V Poe Switch


Q6.Does it included the Poe Adapter ?

A: Yes, the packaged included the 15V Poe Adapter


Q7.Does the antenna wifi coverage 1km?

A: The antenna is directional antenna , not the omnidirectional , need 2pcs point to point no obstacles environment can reach 1km.i