• Package include
  •  
  • 1 pcs Taillight Assembly
  •  
  • Fitment
  •  
  • For 2009-2010 Toyota Corolla
  •  
  • Feature
  •  
  • Made of materials that meet or exceed OEM requirements.
  • 1-year Manufacture Warranty 
  • 30-Day return Policy
  •  
  • Note 1.High quality lights.Safety and Durable.
  • 2.Condition: 100% Brand New and High Quality. 3.DOT/SAE approved for street legal. Safety & Fashion. 4.High grade ABS plastic. For toughness, impact resistance, and heat resistance. 5.Material: ABS Plastic Housing / Polycarbonate Lens.

    • Tail Light Assembly LH For 2009-2010 Toyota Corolla Rear Brake Driver Side

    Package include

     

    1 pcs Taillight Assembly

     

    Fitment

     

    For 2009-2010 Toyota Corolla

     

    Feature

     

    Made of materials that meet or exceed OEM requirements.

    1-year Manufacture Warranty 

    30-Day return Policy

     

    Note
    1.High quality lights.Safety and Durable.

    2.Condition: 100% Brand New and High Quality.
    3.DOT/SAE approved for street legal. Safety & Fashion.
    4.High grade ABS plastic. For toughness, impact resistance, and heat resistance.
    5.Material: ABS Plastic Housing / Polycarbonate Lens.

    6.Professional Installation is Highly Recommended.
    7.Installation Instruction is NOT Included.

     

    How to install/adjust?


    Install:
    1.Undo the screws, clips, or retainer springs that hold the headlight in place.
    2.Disconnect the wiring from the assembly.
    3.Detach the headlight from the vehicle to replace it with a new one.
    4.Fit in the new headlight assembly.
    5.Fix the new headlight into place and make sure that the screws, clips, or retainer springs used are sealed.
    6.Reconnect the wiring that was unplugged from the assembly.
    7.Put back the grille and other components that you removed. Seal them back into place.
    8.Test the new assembly.

     

    Adjust：
    Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from teh wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.

    1. 【Find the adjustment screws】Firstly, locate the adjustment screws on your vehicle.
    2. 【Adjust the headlights individually】The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.
    3. 【Adjust the vertical field】The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.
    4. 【Adjust the horizontal field】The screw on the side of the light housing should be turned to get the right/left adjustment correct. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.
    5. 【Test your results】

     


    Item Specifics
    Brand REFITTING
    Type Tail Light Assembly
    Placement on Vehicle Rear Left
    Features SAE-Certified
    Manufacturer Part Number 13228997
    Performance Part No
    Universal Fitment No
    Vintage Car Part No
    Manufacturer Warranty 1 Year
    Items Included As picture shown
    Interchange Part Number For 2009-2010 Toyota Corolla
    Superseded Part Number TO280017
    Mounting Hardware Included No
    Housing Color Red
    Dust and Moisture Protection Yes
    Lens Color Clear
    OE/OEM Part Number 8156002460
    Assembly Type Composite
    Water Proof Yes
    Vintage Part No
    Finish Smooth

    Payment
    1.We accept any payment which can be accepted by ebay.
     
    2.If you want to change the shipping address, please contact us by eBay messages.
     
    3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
     
    4.Payment must be received within 10 days as auction ended or order might be delayed.
    Shipping
    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
     
    2. We only ship to confirmed order addresses.
     
    3. The images shown are not the actual item and are for your reference only.
     
    4. Fast shipping:All our packages use USPS First Class/UPS/Fedex... Package Service
     
    5. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back
    Returns
    1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
     
    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
     
    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
     
    4. Return shipping is to be paid by the Buyer. to you as soon as possible with a reply. Our goal is customer satisfaction!
    Contact Us
    1. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
     
    2. It is impossible to address issues if we do not know about them!

    Shop Category
     Store Home
     Third Brake Light Assemblies
     Headlight Assembly
     Fog Light
     Side Marker Light Assemblies
     Mirror Assemblies
     Wheel Spacers
     AC Condenser
     Radiator
     Cooling Fan
     Wheel Bearing Hub Assembly
     Mass Air Flow Sensor
     Spoiler Wing
     Switch
    Hot Item
    Picture

    content_src_url

    New List Item
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    Tail Light Assembly LH For 2009-2010 Toyota Corolla Rear Brake Driver Side

    Package include

     

    1 pcs Taillight Assembly

     

    Fitment

     

    For 2009-2010 Toyota Corolla

     

    Feature

     

    Made of materials that meet or exceed OEM requirements.

    1-year Manufacture Warranty 

    30-Day return Policy

     

    Note
    1.High quality lights.Safety and Durable.

    2.Condition: 100% Brand New and High Quality.
    3.DOT/SAE approved for street legal. Safety & Fashion.
    4.High grade ABS plastic. For toughness, impact resistance, and heat resistance.
    5.Material: ABS Plastic Housing / Polycarbonate Lens.

    6.Professional Installation is Highly Recommended.
    7.Installation Instruction is NOT Included.

     

    How to install/adjust?


    Install:
    1.Undo the screws, clips, or retainer springs that hold the headlight in place.
    2.Disconnect the wiring from the assembly.
    3.Detach the headlight from the vehicle to replace it with a new one.
    4.Fit in the new headlight assembly.
    5.Fix the new headlight into place and make sure that the screws, clips, or retainer springs used are sealed.
    6.Reconnect the wiring that was unplugged from the assembly.
    7.Put back the grille and other components that you removed. Seal them back into place.
    8.Test the new assembly.

     

    Adjust：
    Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from teh wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.

    1. 【Find the adjustment screws】Firstly, locate the adjustment screws on your vehicle.
    2. 【Adjust the headlights individually】The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.
    3. 【Adjust the vertical field】The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.
    4. 【Adjust the horizontal field】The screw on the side of the light housing should be turned to get the right/left adjustment correct. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.
    5. 【Test your results】

     



    1.We accept any payment which can be accepted by ebay.
     
    2.If you want to change the shipping address, please contact us by eBay messages.
     
    3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
     
    4.Payment must be received within 10 days as auction ended or order might be delayed.
    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
     
    2. We only ship to confirmed order addresses.
     
    3. The images shown are not the actual item and are for your reference only.
     
    4. Fast shipping:All our packages use USPS First Class/UPS/Fedex... Package Service
     
    5. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back
    1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
     
    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
     
    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
     
    4. Return shipping is to be paid by the Buyer. to you as soon as possible with a reply. Our goal is customer satisfaction!
    1. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
     
    2. It is impossible to address issues if we do not know about them!

    All rights reserved.