Note: The pulley speed should not exceed 1000r/min.
Description:
This air compressor pump has high hardness, tensile strength, and compression resistance, allowing you to use them with peace of mind. The powerful heat dissipation performance enables it to quickly cool the machine. The air filter muffler can ensure low noise operation of the machine. It will be a good assistant for you to improve working efficiency.

Specification:
Colour: Black
Material: Cast Iron, Aluminum
Power Source: Electric
Cylinder: 65mm*3
Maximum Working Pressure: 0.8MPa/115PSI
Maximum Speed: 1030rpm  
Exhaust Volume: 0.36m³/min/12.7cfm
Pipe Interface: 19mm/ 3/4in
Matching Motor Power: 3KW/4HP
Gross Weight: 21kg/46.29 lbs
Package Size: 44*33*38cm/17.32*12.99*14.96in

 

Package Included:
1*Air Compressor Pump
3*Air Filter Mufflers

Notes:
- It should match the motor power. Please pay attention to the product specifications before ordering.
- When placing the pump head, the motor pulley and the belt pulley must be in the same straight line. The more aligned, the less vibration.
- After the screws are installed, the belt shall be tightened. If the belt is loose, please move the motor. After the screws are tightened, reinstall the belt.
- The new machine must be filled with engine oil before starting(Special engine oil for air compressors must be used), and the engine oil shall be added to the center of the red point of the oil mirror. - Please change the oil for half a month for the first time, one and a half months for the second time, and change the oil for the next four to five months. Please pay attention to observation at ordinary times. If it is not enough, replenish it in time.
- The rotation direction of the pump head is clockwise. If it reverses, please adjust it in time.
- Please replace the air filter regularly. Under normal conditions, it must be replaced in two to three months, and in case of a poor environment, it must be replaced in one month.
- The operation of the machine will produce high temperature, please be careful not to burn!
- Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering.

Key Features:
|Sturdy and Durable: Made of cast iron and aluminum with high strength and good rigidity, together with a painting finish, it is resistant to wear, corrosion, and rust, ensuring excellent performance and long service life.
|Improving Efficiency: It can provide gas supply to multiple devices simultaneously by controlling the switches of different pump heads, avoiding single-point faults affecting the entire production line and improving gas supply efficiency.
|Excellent Performance: The large crankcase makes the machine run smoother and less prone to oil leakage during operation. The extended cylinder increases the stroke to achieve rapid inflation.
|Low Energy Consumption: Compared to compressors with a single pump head, multiple pump heads can reduce the pressure and flow rate of each pump head, thereby reducing the power and energy consumption of the compressor.
|Faster Heat Dissipation: The dual iron breathing nozzles reduce the internal pressure and temperature of the machine. The aluminum tube and evenly distributed heat dissipation fins on the outside make the machine dissipate heat faster, ensuring stable operation and extending the service life of the host.
|Low Noise: The air filter with a silencing function makes it operate at low noise, providing you with a relatively quiet working environment.
|Simple Installation: The integrated structure and pre-drilled holes on the base allow for easy installation.
|
|Application:
|It is widely used in the chemical industry, light industry, textile, food processing, health, electronics, machinery, mining, construction, scientific research, etc.